本文整理匯總了Golang中cmd/compile/internal/gc.Ismem函數的典型用法代碼示例。如果您正苦於以下問題：Golang Ismem函數的具體用法？Golang Ismem怎麽用？Golang Ismem使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了Ismem函數的8個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: gmove
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := (*gc.Type)(t.Type)
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var r1 gc.Node
var a int
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
switch tt {
default:
f.Convconst(&con, t.Type)
case gc.TINT32,
gc.TINT16,
gc.TINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm64.AMOVD, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
case gc.TUINT32,
gc.TUINT16,
gc.TUINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TUINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm64.AMOVD, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
f = &con
ft = tt // so big switch will choose a simple mov
// constants can't move directly to memory.
if gc.Ismem(t) {
goto hard
}
}
// value -> value copy, first operand in memory.
// any floating point operand requires register
// src, so goto hard to copy to register first.
if gc.Ismem(f) && ft != tt && (gc.Isfloat[ft] || gc.Isfloat[tt]) {
cvt = gc.Types[ft]
goto hard
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8,
// truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = arm64.AMOVB
//.........這裏部分代碼省略.........
示例2: gmove
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", f, t)
}
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
if gc.Isfloat[ft] || gc.Isfloat[tt] {
floatmove(f, t)
return
}
// cannot have two integer memory operands;
// except 64-bit, which always copies via registers anyway.
var r1 gc.Node
var a int
if gc.Isint[ft] && gc.Isint[tt] && !gc.Is64(f.Type) && !gc.Is64(t.Type) && gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = gc.Simsimtype(con.Type)
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
// should not happen
gc.Fatalf("gmove %v -> %v", f, t)
return
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TINT8<<16 | gc.TUINT8,
gc.TUINT8<<16 | gc.TINT8,
gc.TUINT8<<16 | gc.TUINT8:
a = x86.AMOVB
case gc.TINT16<<16 | gc.TINT8, // truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TUINT8,
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8:
a = x86.AMOVB
goto rsrc
case gc.TINT64<<16 | gc.TINT8, // truncate low word
gc.TUINT64<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
var flo gc.Node
var fhi gc.Node
split64(f, &flo, &fhi)
var r1 gc.Node
gc.Nodreg(&r1, t.Type, x86.REG_AX)
gmove(&flo, &r1)
gins(x86.AMOVB, &r1, t)
splitclean()
return
case gc.TINT16<<16 | gc.TINT16, // same size
gc.TINT16<<16 | gc.TUINT16,
gc.TUINT16<<16 | gc.TINT16,
gc.TUINT16<<16 | gc.TUINT16:
a = x86.AMOVW
case gc.TINT32<<16 | gc.TINT16, // truncate
gc.TUINT32<<16 | gc.TINT16,
gc.TINT32<<16 | gc.TUINT16,
gc.TUINT32<<16 | gc.TUINT16:
a = x86.AMOVW
goto rsrc
case gc.TINT64<<16 | gc.TINT16, // truncate low word
gc.TUINT64<<16 | gc.TINT16,
//.........這裏部分代碼省略.........
示例3: floatmove
func floatmove(f *gc.Node, t *gc.Node) {
var r1 gc.Node
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
// cannot have two floating point memory operands.
if gc.Isfloat[ft] && gc.Isfloat[tt] && gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = gc.Simsimtype(con.Type)
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if gc.Isfloat[tt] {
goto hard
}
}
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
if gc.Thearch.Use387 {
floatmove_387(f, t)
} else {
floatmove_sse(f, t)
}
return
// float to very long integer.
case gc.TFLOAT32<<16 | gc.TINT64,
gc.TFLOAT64<<16 | gc.TINT64:
if f.Op == gc.OREGISTER {
cvt = f.Type
goto hardmem
}
var r1 gc.Node
gc.Nodreg(&r1, gc.Types[ft], x86.REG_F0)
if ft == gc.TFLOAT32 {
gins(x86.AFMOVF, f, &r1)
} else {
gins(x86.AFMOVD, f, &r1)
}
// set round to zero mode during conversion
var t1 gc.Node
memname(&t1, gc.Types[gc.TUINT16])
var t2 gc.Node
memname(&t2, gc.Types[gc.TUINT16])
gins(x86.AFSTCW, nil, &t1)
gins(x86.AMOVW, ncon(0xf7f), &t2)
gins(x86.AFLDCW, &t2, nil)
if tt == gc.TINT16 {
gins(x86.AFMOVWP, &r1, t)
} else if tt == gc.TINT32 {
gins(x86.AFMOVLP, &r1, t)
} else {
gins(x86.AFMOVVP, &r1, t)
}
gins(x86.AFLDCW, &t1, nil)
return
case gc.TFLOAT32<<16 | gc.TUINT64,
gc.TFLOAT64<<16 | gc.TUINT64:
if !gc.Ismem(f) {
cvt = f.Type
goto hardmem
}
bignodes()
var f0 gc.Node
gc.Nodreg(&f0, gc.Types[ft], x86.REG_F0)
var f1 gc.Node
gc.Nodreg(&f1, gc.Types[ft], x86.REG_F0+1)
var ax gc.Node
gc.Nodreg(&ax, gc.Types[gc.TUINT16], x86.REG_AX)
if ft == gc.TFLOAT32 {
gins(x86.AFMOVF, f, &f0)
} else {
gins(x86.AFMOVD, f, &f0)
}
//.........這裏部分代碼省略.........
示例4: floatmove_387
//.........這裏部分代碼省略.........
default:
a = x86.AFMOVV
}
// convert via int32 memory
case gc.TINT8<<16 | gc.TFLOAT32,
gc.TINT8<<16 | gc.TFLOAT64,
gc.TUINT16<<16 | gc.TFLOAT32,
gc.TUINT16<<16 | gc.TFLOAT64,
gc.TUINT8<<16 | gc.TFLOAT32,
gc.TUINT8<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT32]
goto hardmem
// convert via int64 memory
case gc.TUINT32<<16 | gc.TFLOAT32,
gc.TUINT32<<16 | gc.TFLOAT64:
cvt = gc.Types[gc.TINT64]
goto hardmem
// The way the code generator uses floating-point
// registers, a move from F0 to F0 is intended as a no-op.
// On the x86, it's not: it pushes a second copy of F0
// on the floating point stack. So toss it away here.
// Also, F0 is the *only* register we ever evaluate
// into, so we should only see register/register as F0/F0.
/*
* float to float
*/
case gc.TFLOAT32<<16 | gc.TFLOAT32,
gc.TFLOAT64<<16 | gc.TFLOAT64:
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
if f.Reg != x86.REG_F0 || t.Reg != x86.REG_F0 {
goto fatal
}
return
}
a = x86.AFMOVF
if ft == gc.TFLOAT64 {
a = x86.AFMOVD
}
if gc.Ismem(t) {
if f.Op != gc.OREGISTER || f.Reg != x86.REG_F0 {
gc.Fatalf("gmove %v", f)
}
a = x86.AFMOVFP
if ft == gc.TFLOAT64 {
a = x86.AFMOVDP
}
}
case gc.TFLOAT32<<16 | gc.TFLOAT64:
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
if f.Op == gc.OREGISTER && t.Op == gc.OREGISTER {
if f.Reg != x86.REG_F0 || t.Reg != x86.REG_F0 {
goto fatal
}
return示例5: gmove
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", f, t)
}
ft := gc.Simsimtype(f.Type)
tt := gc.Simsimtype(t.Type)
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands;
// except 64-bit, which always copies via registers anyway.
var a int
var r1 gc.Node
if !gc.Is64(f.Type) && !gc.Is64(t.Type) && gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
switch tt {
default:
f.Convconst(&con, t.Type)
case gc.TINT16,
gc.TINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TINT32])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm.AMOVW, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
case gc.TUINT16,
gc.TUINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TUINT32])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(arm.AMOVW, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
f = &con
ft = gc.Simsimtype(con.Type)
// constants can't move directly to memory
if gc.Ismem(t) && !gc.Is64(t.Type) {
goto hard
}
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
// should not happen
gc.Fatal("gmove %v -> %v", f, t)
return
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8: // same size
if !gc.Ismem(f) {
a = arm.AMOVB
break
}
fallthrough
case gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8, // truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8:
a = arm.AMOVBS
case gc.TUINT8<<16 | gc.TUINT8:
if !gc.Ismem(f) {
a = arm.AMOVB
break
}
fallthrough
case gc.TINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8,
//.........這裏部分代碼省略.........
示例6: gmove
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var r2 gc.Node
var r1 gc.Node
var a int
if gc.Ismem(f) && gc.Ismem(t) {
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
switch tt {
default:
f.Convconst(&con, t.Type)
case gc.TINT32,
gc.TINT16,
gc.TINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(mips.AMOVV, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
case gc.TUINT32,
gc.TUINT16,
gc.TUINT8:
var con gc.Node
f.Convconst(&con, gc.Types[gc.TUINT64])
var r1 gc.Node
gc.Regalloc(&r1, con.Type, t)
gins(mips.AMOVV, &con, &r1)
gmove(&r1, t)
gc.Regfree(&r1)
return
}
f = &con
ft = tt // so big switch will choose a simple mov
// constants can't move directly to memory.
if gc.Ismem(t) {
goto hard
}
}
// value -> value copy, first operand in memory.
// any floating point operand requires register
// src, so goto hard to copy to register first.
if gc.Ismem(f) && ft != tt && (gc.Isfloat[ft] || gc.Isfloat[tt]) {
cvt = gc.Types[ft]
goto hard
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8, // truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = mips.AMOVB
//.........這裏部分代碼省略.........
示例7: gmove
/*
* generate move:
* t = f
* hard part is conversions.
*/
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := (*gc.Type)(t.Type)
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
// cannot have two memory operands
var a int
if gc.Ismem(f) && gc.Ismem(t) {
if gmvc(f, t) {
return
}
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = tt // so big switch will choose a simple mov
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if gc.Isfloat[tt] {
goto hard
}
// all immediates are 16-bit sign-extended
// unless moving into a register.
if gc.Isint[tt] {
if i := con.Int(); int64(int16(i)) != i {
goto hard
}
}
}
}
// a float-to-int or int-to-float conversion requires the source operand in a register
if gc.Ismem(f) && ((gc.Isfloat[ft] && gc.Isint[tt]) || (gc.Isint[ft] && gc.Isfloat[tt])) {
cvt = (*gc.Type)(f.Type)
goto hard
}
// a float32-to-float64 or float64-to-float32 conversion requires the source operand in a register
if gc.Ismem(f) && gc.Isfloat[ft] && gc.Isfloat[tt] && (ft != tt) {
cvt = (*gc.Type)(f.Type)
goto hard
}
// float constants come from memory.
//if(isfloat[tt])
// goto hard;
// 64-bit immediates are also from memory.
//if(isint[tt])
// goto hard;
//// 64-bit immediates are really 32-bit sign-extended
//// unless moving into a register.
//if(isint[tt]) {
// if(mpcmpfixfix(con.val.u.xval, minintval[TINT32]) < 0)
// goto hard;
// if(mpcmpfixfix(con.val.u.xval, maxintval[TINT32]) > 0)
// goto hard;
//}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))
/*
* integer copy and truncate
*/
case gc.TINT8<<16 | gc.TINT8, // same size
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8,
// truncate
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
//.........這裏部分代碼省略.........
示例8: gmove
// generate move:
// t = f
// hard part is conversions.
func gmove(f *gc.Node, t *gc.Node) {
if gc.Debug['M'] != 0 {
fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, gc.FmtLong), gc.Nconv(t, gc.FmtLong))
}
ft := int(gc.Simsimtype(f.Type))
tt := int(gc.Simsimtype(t.Type))
cvt := t.Type
if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
gc.Complexmove(f, t)
return
}
var a obj.As
// cannot have two memory operands
if gc.Ismem(f) && gc.Ismem(t) {
if gmvc(f, t) {
return
}
goto hard
}
// convert constant to desired type
if f.Op == gc.OLITERAL {
var con gc.Node
f.Convconst(&con, t.Type)
f = &con
ft = tt // so big switch will choose a simple mov
// some constants can't move directly to memory.
if gc.Ismem(t) {
// float constants come from memory.
if t.Type.IsFloat() {
goto hard
}
// all immediates are 16-bit sign-extended
// unless moving into a register.
if t.Type.IsInteger() {
if i := con.Int64(); int64(int16(i)) != i {
goto hard
}
}
// immediate moves to memory have a 12-bit unsigned displacement
if t.Xoffset < 0 || t.Xoffset >= 4096-8 {
goto hard
}
}
}
// a float-to-int or int-to-float conversion requires the source operand in a register
if gc.Ismem(f) && ((f.Type.IsFloat() && t.Type.IsInteger()) || (f.Type.IsInteger() && t.Type.IsFloat())) {
cvt = f.Type
goto hard
}
// a float32-to-float64 or float64-to-float32 conversion requires the source operand in a register
if gc.Ismem(f) && f.Type.IsFloat() && t.Type.IsFloat() && (ft != tt) {
cvt = f.Type
goto hard
}
// value -> value copy, only one memory operand.
// figure out the instruction to use.
// break out of switch for one-instruction gins.
// goto rdst for "destination must be register".
// goto hard for "convert to cvt type first".
// otherwise handle and return.
switch uint32(ft)<<16 | uint32(tt) {
default:
gc.Fatalf("gmove %v -> %v", gc.Tconv(f.Type, gc.FmtLong), gc.Tconv(t.Type, gc.FmtLong))
// integer copy and truncate
case gc.TINT8<<16 | gc.TINT8,
gc.TUINT8<<16 | gc.TINT8,
gc.TINT16<<16 | gc.TINT8,
gc.TUINT16<<16 | gc.TINT8,
gc.TINT32<<16 | gc.TINT8,
gc.TUINT32<<16 | gc.TINT8,
gc.TINT64<<16 | gc.TINT8,
gc.TUINT64<<16 | gc.TINT8:
a = s390x.AMOVB
case gc.TINT8<<16 | gc.TUINT8,
gc.TUINT8<<16 | gc.TUINT8,
gc.TINT16<<16 | gc.TUINT8,
gc.TUINT16<<16 | gc.TUINT8,
gc.TINT32<<16 | gc.TUINT8,
gc.TUINT32<<16 | gc.TUINT8,
gc.TINT64<<16 | gc.TUINT8,
gc.TUINT64<<16 | gc.TUINT8:
a = s390x.AMOVBZ
case gc.TINT16<<16 | gc.TINT16,
//.........這裏部分代碼省略.........