當前位置: 首頁>>代碼示例>>Golang>>正文

Golang gc.Is64函數代碼示例

本文整理匯總了Golang中cmd/compile/internal/gc.Is64函數的典型用法代碼示例。如果您正苦於以下問題：Golang Is64函數的具體用法？Golang Is64怎麽用？Golang Is64使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。


在下文中一共展示了Is64函數的8個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: igenindex

/*
 * generate an addressable node in res, containing the value of n.
 * n is an array index, and might be any size; res width is <= 32-bit.
 * returns Prog* to patch to panic call.
 */
func igenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	if !gc.Is64(n.Type) {
		if n.Addable && (gc.Simtype[n.Etype] == gc.TUINT32 || gc.Simtype[n.Etype] == gc.TINT32) {
			// nothing to do.
			*res = *n
		} else {
			gc.Tempname(res, gc.Types[gc.TUINT32])
			gc.Cgen(n, res)
		}

		return nil
	}

	var tmp gc.Node
	gc.Tempname(&tmp, gc.Types[gc.TINT64])
	gc.Cgen(n, &tmp)
	var lo gc.Node
	var hi gc.Node
	split64(&tmp, &lo, &hi)
	gc.Tempname(res, gc.Types[gc.TUINT32])
	gmove(&lo, res)
	if bounded {
		splitclean()
		return nil
	}

	var zero gc.Node
	gc.Nodconst(&zero, gc.Types[gc.TINT32], 0)
	gins(x86.ACMPL, &hi, &zero)
	splitclean()
	return gc.Gbranch(x86.AJNE, nil, +1)
}
開發者ID:Greentor，項目名稱:go，代碼行數:37，代碼來源:cgen.go

示例2: cgenindex

/*
 * generate array index into res.
 * n might be any size; res is 32-bit.
 * returns Prog* to patch to panic call.
 */
func cgenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	if !gc.Is64(n.Type) {
		gc.Cgen(n, res)
		return nil
	}

	var tmp gc.Node
	gc.Tempname(&tmp, gc.Types[gc.TINT64])
	gc.Cgen(n, &tmp)
	var lo gc.Node
	var hi gc.Node
	split64(&tmp, &lo, &hi)
	gmove(&lo, res)
	if bounded {
		splitclean()
		return nil
	}

	var n1 gc.Node
	gc.Regalloc(&n1, gc.Types[gc.TINT32], nil)
	var n2 gc.Node
	gc.Regalloc(&n2, gc.Types[gc.TINT32], nil)
	var zero gc.Node
	gc.Nodconst(&zero, gc.Types[gc.TINT32], 0)
	gmove(&hi, &n1)
	gmove(&zero, &n2)
	gins(arm.ACMP, &n1, &n2)
	gc.Regfree(&n2)
	gc.Regfree(&n1)
	splitclean()
	return gc.Gbranch(arm.ABNE, nil, -1)
}
開發者ID:rentongzhang，項目名稱:go，代碼行數:37，代碼來源:cgen.go

示例3: split64

/*
 * n is a 64-bit value.  fill in lo and hi to refer to its 32-bit halves.
 */
func split64(n *gc.Node, lo *gc.Node, hi *gc.Node) {
	if !gc.Is64(n.Type) {
		gc.Fatalf("split64 %v", n.Type)
	}

	if nsclean >= len(sclean) {
		gc.Fatalf("split64 clean")
	}
	sclean[nsclean].Op = gc.OEMPTY
	nsclean++
	switch n.Op {
	default:
		switch n.Op {
		default:
			var n1 gc.Node
			if !dotaddable(n, &n1) {
				gc.Igen(n, &n1, nil)
				sclean[nsclean-1] = n1
			}

			n = &n1

		case gc.ONAME:
			if n.Class == gc.PPARAMREF {
				var n1 gc.Node
				gc.Cgen(n.Name.Heapaddr, &n1)
				sclean[nsclean-1] = n1
				n = &n1
			}

			// nothing
		case gc.OINDREG:
			break
		}

		*lo = *n
		*hi = *n
		lo.Type = gc.Types[gc.TUINT32]
		if n.Type.Etype == gc.TINT64 {
			hi.Type = gc.Types[gc.TINT32]
		} else {
			hi.Type = gc.Types[gc.TUINT32]
		}
		hi.Xoffset += 4

	case gc.OLITERAL:
		var n1 gc.Node
		n.Convconst(&n1, n.Type)
		i := n1.Int()
		gc.Nodconst(lo, gc.Types[gc.TUINT32], int64(uint32(i)))
		i >>= 32
		if n.Type.Etype == gc.TINT64 {
			gc.Nodconst(hi, gc.Types[gc.TINT32], int64(int32(i)))
		} else {
			gc.Nodconst(hi, gc.Types[gc.TUINT32], int64(uint32(i)))
		}
	}
}
開發者ID:sreis，項目名稱:go，代碼行數:61，代碼來源:gsubr.go

示例4: cgen_div

/*
 * generate division according to op, one of:
 *	res = nl / nr
 *	res = nl % nr
 */
func cgen_div(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if gc.Is64(nl.Type) {
		gc.Fatalf("cgen_div %v", nl.Type)
	}

	var t *gc.Type
	if gc.Issigned[nl.Type.Etype] {
		t = gc.Types[gc.TINT32]
	} else {
		t = gc.Types[gc.TUINT32]
	}
	var ax gc.Node
	var oldax gc.Node
	savex(x86.REG_AX, &ax, &oldax, res, t)
	var olddx gc.Node
	var dx gc.Node
	savex(x86.REG_DX, &dx, &olddx, res, t)
	dodiv(op, nl, nr, res, &ax, &dx)
	restx(&dx, &olddx)
	restx(&ax, &oldax)
}
開發者ID:Samurais，項目名稱:go，代碼行數:26，代碼來源:ggen.go

示例5: cgen64

/*
 * attempt to generate 64-bit
 *	res = n
 * return 1 on success, 0 if op not handled.
 */
func cgen64(n *gc.Node, res *gc.Node) {
	if res.Op != gc.OINDREG && res.Op != gc.ONAME {
		gc.Dump("n", n)
		gc.Dump("res", res)
		gc.Fatalf("cgen64 %v of %v", gc.Oconv(int(n.Op), 0), gc.Oconv(int(res.Op), 0))
	}

	switch n.Op {
	default:
		gc.Fatalf("cgen64 %v", gc.Oconv(int(n.Op), 0))

	case gc.OMINUS:
		gc.Cgen(n.Left, res)
		var hi1 gc.Node
		var lo1 gc.Node
		split64(res, &lo1, &hi1)
		gins(x86.ANEGL, nil, &lo1)
		gins(x86.AADCL, ncon(0), &hi1)
		gins(x86.ANEGL, nil, &hi1)
		splitclean()
		return

	case gc.OCOM:
		gc.Cgen(n.Left, res)
		var lo1 gc.Node
		var hi1 gc.Node
		split64(res, &lo1, &hi1)
		gins(x86.ANOTL, nil, &lo1)
		gins(x86.ANOTL, nil, &hi1)
		splitclean()
		return

		// binary operators.
	// common setup below.
	case gc.OADD,
		gc.OSUB,
		gc.OMUL,
		gc.OLROT,
		gc.OLSH,
		gc.ORSH,
		gc.OAND,
		gc.OOR,
		gc.OXOR:
		break
	}

	l := n.Left
	r := n.Right
	if !l.Addable {
		var t1 gc.Node
		gc.Tempname(&t1, l.Type)
		gc.Cgen(l, &t1)
		l = &t1
	}

	if r != nil && !r.Addable {
		var t2 gc.Node
		gc.Tempname(&t2, r.Type)
		gc.Cgen(r, &t2)
		r = &t2
	}

	var ax gc.Node
	gc.Nodreg(&ax, gc.Types[gc.TINT32], x86.REG_AX)
	var cx gc.Node
	gc.Nodreg(&cx, gc.Types[gc.TINT32], x86.REG_CX)
	var dx gc.Node
	gc.Nodreg(&dx, gc.Types[gc.TINT32], x86.REG_DX)

	// Setup for binary operation.
	var hi1 gc.Node
	var lo1 gc.Node
	split64(l, &lo1, &hi1)

	var lo2 gc.Node
	var hi2 gc.Node
	if gc.Is64(r.Type) {
		split64(r, &lo2, &hi2)
	}

	// Do op. Leave result in DX:AX.
	switch n.Op {
	// TODO: Constants
	case gc.OADD:
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)
		gins(x86.AADDL, &lo2, &ax)
		gins(x86.AADCL, &hi2, &dx)

		// TODO: Constants.
	case gc.OSUB:
		gins(x86.AMOVL, &lo1, &ax)

		gins(x86.AMOVL, &hi1, &dx)
//.........這裏部分代碼省略.........
開發者ID:sreis，項目名稱:go，代碼行數:101，代碼來源:cgen64.go

示例6: gmove

func gmove(f *gc.Node, t *gc.Node) {
	if gc.Debug['M'] != 0 {
		fmt.Printf("gmove %v -> %v\n", f, t)
	}

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
		gc.Complexmove(f, t)
		return
	}

	if gc.Isfloat[ft] || gc.Isfloat[tt] {
		floatmove(f, t)
		return
	}

	// cannot have two integer memory operands;
	// except 64-bit, which always copies via registers anyway.
	var r1 gc.Node
	var a int
	if gc.Isint[ft] && gc.Isint[tt] && !gc.Is64(f.Type) && !gc.Is64(t.Type) && gc.Ismem(f) && gc.Ismem(t) {
		goto hard
	}

	// convert constant to desired type
	if f.Op == gc.OLITERAL {
		var con gc.Node
		f.Convconst(&con, t.Type)
		f = &con
		ft = gc.Simsimtype(con.Type)
	}

	// value -> value copy, only one memory operand.
	// figure out the instruction to use.
	// break out of switch for one-instruction gins.
	// goto rdst for "destination must be register".
	// goto hard for "convert to cvt type first".
	// otherwise handle and return.

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		// should not happen
		gc.Fatalf("gmove %v -> %v", f, t)
		return

		/*
		 * integer copy and truncate
		 */
	case gc.TINT8<<16 | gc.TINT8, // same size
		gc.TINT8<<16 | gc.TUINT8,
		gc.TUINT8<<16 | gc.TINT8,
		gc.TUINT8<<16 | gc.TUINT8:
		a = x86.AMOVB

	case gc.TINT16<<16 | gc.TINT8, // truncate
		gc.TUINT16<<16 | gc.TINT8,
		gc.TINT32<<16 | gc.TINT8,
		gc.TUINT32<<16 | gc.TINT8,
		gc.TINT16<<16 | gc.TUINT8,
		gc.TUINT16<<16 | gc.TUINT8,
		gc.TINT32<<16 | gc.TUINT8,
		gc.TUINT32<<16 | gc.TUINT8:
		a = x86.AMOVB

		goto rsrc

	case gc.TINT64<<16 | gc.TINT8, // truncate low word
		gc.TUINT64<<16 | gc.TINT8,
		gc.TINT64<<16 | gc.TUINT8,
		gc.TUINT64<<16 | gc.TUINT8:
		var flo gc.Node
		var fhi gc.Node
		split64(f, &flo, &fhi)

		var r1 gc.Node
		gc.Nodreg(&r1, t.Type, x86.REG_AX)
		gmove(&flo, &r1)
		gins(x86.AMOVB, &r1, t)
		splitclean()
		return

	case gc.TINT16<<16 | gc.TINT16, // same size
		gc.TINT16<<16 | gc.TUINT16,
		gc.TUINT16<<16 | gc.TINT16,
		gc.TUINT16<<16 | gc.TUINT16:
		a = x86.AMOVW

	case gc.TINT32<<16 | gc.TINT16, // truncate
		gc.TUINT32<<16 | gc.TINT16,
		gc.TINT32<<16 | gc.TUINT16,
		gc.TUINT32<<16 | gc.TUINT16:
		a = x86.AMOVW

		goto rsrc

	case gc.TINT64<<16 | gc.TINT16, // truncate low word
		gc.TUINT64<<16 | gc.TINT16,
//.........這裏部分代碼省略.........
開發者ID:sreis，項目名稱:go，代碼行數:101，代碼來源:gsubr.go

示例7: gmove

func gmove(f *gc.Node, t *gc.Node) {
	if gc.Debug['M'] != 0 {
		fmt.Printf("gmove %v -> %v\n", f, t)
	}

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
		gc.Complexmove(f, t)
		return
	}

	// cannot have two memory operands;
	// except 64-bit, which always copies via registers anyway.
	var a int
	var r1 gc.Node
	if !gc.Is64(f.Type) && !gc.Is64(t.Type) && gc.Ismem(f) && gc.Ismem(t) {
		goto hard
	}

	// convert constant to desired type
	if f.Op == gc.OLITERAL {
		var con gc.Node
		switch tt {
		default:
			f.Convconst(&con, t.Type)

		case gc.TINT16,
			gc.TINT8:
			var con gc.Node
			f.Convconst(&con, gc.Types[gc.TINT32])
			var r1 gc.Node
			gc.Regalloc(&r1, con.Type, t)
			gins(arm.AMOVW, &con, &r1)
			gmove(&r1, t)
			gc.Regfree(&r1)
			return

		case gc.TUINT16,
			gc.TUINT8:
			var con gc.Node
			f.Convconst(&con, gc.Types[gc.TUINT32])
			var r1 gc.Node
			gc.Regalloc(&r1, con.Type, t)
			gins(arm.AMOVW, &con, &r1)
			gmove(&r1, t)
			gc.Regfree(&r1)
			return
		}

		f = &con
		ft = gc.Simsimtype(con.Type)

		// constants can't move directly to memory
		if gc.Ismem(t) && !gc.Is64(t.Type) {
			goto hard
		}
	}

	// value -> value copy, only one memory operand.
	// figure out the instruction to use.
	// break out of switch for one-instruction gins.
	// goto rdst for "destination must be register".
	// goto hard for "convert to cvt type first".
	// otherwise handle and return.

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		// should not happen
		gc.Fatal("gmove %v -> %v", f, t)
		return

		/*
		 * integer copy and truncate
		 */
	case gc.TINT8<<16 | gc.TINT8: // same size
		if !gc.Ismem(f) {
			a = arm.AMOVB
			break
		}
		fallthrough

	case gc.TUINT8<<16 | gc.TINT8,
		gc.TINT16<<16 | gc.TINT8, // truncate
		gc.TUINT16<<16 | gc.TINT8,
		gc.TINT32<<16 | gc.TINT8,
		gc.TUINT32<<16 | gc.TINT8:
		a = arm.AMOVBS

	case gc.TUINT8<<16 | gc.TUINT8:
		if !gc.Ismem(f) {
			a = arm.AMOVB
			break
		}
		fallthrough

	case gc.TINT8<<16 | gc.TUINT8,
		gc.TINT16<<16 | gc.TUINT8,
//.........這裏部分代碼省略.........
開發者ID:wheelcomplex，項目名稱:go-1，代碼行數:101，代碼來源:gsubr.go

示例8: cgen64


//.........這裏部分代碼省略.........

		gc.Regfree(&t1)
		gc.Regfree(&n1)
		splitclean()
		splitclean()
		return

		// binary operators.
	// common setup below.
	case gc.OADD,
		gc.OSUB,
		gc.OMUL,
		gc.OLSH,
		gc.ORSH,
		gc.OAND,
		gc.OOR,
		gc.OXOR,
		gc.OLROT:
		break
	}

	// setup for binary operators
	r := n.Right

	if r != nil && !r.Addable {
		var t2 gc.Node
		gc.Tempname(&t2, r.Type)
		gc.Cgen(r, &t2)
		r = &t2
	}

	var hi2 gc.Node
	var lo2 gc.Node
	if gc.Is64(r.Type) {
		split64(r, &lo2, &hi2)
	}

	var al gc.Node
	gc.Regalloc(&al, lo1.Type, nil)
	var ah gc.Node
	gc.Regalloc(&ah, hi1.Type, nil)

	// Do op.  Leave result in ah:al.
	switch n.Op {
	default:
		gc.Fatal("cgen64: not implemented: %v\n", n)

		// TODO: Constants
	case gc.OADD:
		var bl gc.Node
		gc.Regalloc(&bl, gc.Types[gc.TPTR32], nil)

		var bh gc.Node
		gc.Regalloc(&bh, gc.Types[gc.TPTR32], nil)
		gins(arm.AMOVW, &hi1, &ah)
		gins(arm.AMOVW, &lo1, &al)
		gins(arm.AMOVW, &hi2, &bh)
		gins(arm.AMOVW, &lo2, &bl)
		p1 := gins(arm.AADD, &bl, &al)
		p1.Scond |= arm.C_SBIT
		gins(arm.AADC, &bh, &ah)
		gc.Regfree(&bl)
		gc.Regfree(&bh)

		// TODO: Constants.
	case gc.OSUB:
開發者ID:wheelcomplex，項目名稱:go-1，代碼行數:67，代碼來源:cgen64.go


注：本文中的cmd/compile/internal/gc.Is64函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。