本文整理匯總了Golang中cmd/compile/internal/gc.Agen函數的典型用法代碼示例。如果您正苦於以下問題：Golang Agen函數的具體用法？Golang Agen怎麽用？Golang Agen使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了Agen函數的13個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
fmt.Printf("clearfat %v (%v, size: %d)\n", nl, nl.Type, nl.Type.Width)
}
w := uint64(uint64(nl.Type.Width))
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := uint64(w % 8) // bytes
q := uint64(w / 8) // dwords
if gc.Reginuse(ppc64.REGRT1) {
gc.Fatal("%v in use during clearfat", obj.Rconv(ppc64.REGRT1))
}
var r0 gc.Node
gc.Nodreg(&r0, gc.Types[gc.TUINT64], ppc64.REGZERO)
var dst gc.Node
gc.Nodreg(&dst, gc.Types[gc.Tptr], ppc64.REGRT1)
gc.Regrealloc(&dst)
gc.Agen(nl, &dst)
var boff uint64
if q > 128 {
p := gins(ppc64.ASUB, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = 8
var end gc.Node
gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
p = gins(ppc64.AMOVD, &dst, &end)
p.From.Type = obj.TYPE_ADDR
p.From.Offset = int64(q * 8)
p = gins(ppc64.AMOVDU, &r0, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 8
pl := (*obj.Prog)(p)
p = gins(ppc64.ACMP, &dst, &end)
gc.Patch(gc.Gbranch(ppc64.ABNE, nil, 0), pl)
gc.Regfree(&end)
// The loop leaves R3 on the last zeroed dword
boff = 8
} else if q >= 4 {
p := gins(ppc64.ASUB, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = 8
f := (*gc.Node)(gc.Sysfunc("duffzero"))
p = gins(obj.ADUFFZERO, nil, f)
gc.Afunclit(&p.To, f)
// 4 and 128 = magic constants: see ../../runtime/asm_ppc64x.s
p.To.Offset = int64(4 * (128 - q))
// duffzero leaves R3 on the last zeroed dword
boff = 8
} else {
var p *obj.Prog
for t := uint64(0); t < q; t++ {
p = gins(ppc64.AMOVD, &r0, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = int64(8 * t)
}
boff = 8 * q
}
var p *obj.Prog
for t := uint64(0); t < c; t++ {
p = gins(ppc64.AMOVB, &r0, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = int64(t + boff)
}
gc.Regfree(&dst)
}示例2: blockcopy
func blockcopy(n, res *gc.Node, osrc, odst, w int64) {
// determine alignment.
// want to avoid unaligned access, so have to use
// smaller operations for less aligned types.
// for example moving [4]byte must use 4 MOVB not 1 MOVW.
align := int(n.Type.Align)
var op int
switch align {
default:
gc.Fatalf("sgen: invalid alignment %d for %v", align, n.Type)
case 1:
op = mips.AMOVB
case 2:
op = mips.AMOVH
case 4:
op = mips.AMOVW
case 8:
op = mips.AMOVV
}
if w%int64(align) != 0 {
gc.Fatalf("sgen: unaligned size %d (align=%d) for %v", w, align, n.Type)
}
c := int32(w / int64(align))
// if we are copying forward on the stack and
// the src and dst overlap, then reverse direction
dir := align
if osrc < odst && odst < osrc+w {
dir = -dir
}
var dst gc.Node
var src gc.Node
if n.Ullman >= res.Ullman {
gc.Agenr(n, &dst, res) // temporarily use dst
gc.Regalloc(&src, gc.Types[gc.Tptr], nil)
gins(mips.AMOVV, &dst, &src)
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
} else {
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agenr(res, &dst, res)
gc.Agenr(n, &src, nil)
}
var tmp gc.Node
gc.Regalloc(&tmp, gc.Types[gc.Tptr], nil)
// set up end marker
var nend gc.Node
// move src and dest to the end of block if necessary
if dir < 0 {
if c >= 4 {
gc.Regalloc(&nend, gc.Types[gc.Tptr], nil)
gins(mips.AMOVV, &src, &nend)
}
p := gins(mips.AADDV, nil, &src)
p.From.Type = obj.TYPE_CONST
p.From.Offset = w
p = gins(mips.AADDV, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = w
} else {
p := gins(mips.AADDV, nil, &src)
p.From.Type = obj.TYPE_CONST
p.From.Offset = int64(-dir)
p = gins(mips.AADDV, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = int64(-dir)
if c >= 4 {
gc.Regalloc(&nend, gc.Types[gc.Tptr], nil)
p := gins(mips.AMOVV, &src, &nend)
p.From.Type = obj.TYPE_ADDR
p.From.Offset = w
}
}
// move
// TODO: enable duffcopy for larger copies.
if c >= 4 {
p := gins(op, &src, &tmp)
p.From.Type = obj.TYPE_MEM
p.From.Offset = int64(dir)
ploop := p
//.........這裏部分代碼省略.........
示例3: blockcopy
func blockcopy(n, res *gc.Node, osrc, odst, w int64) {
// determine alignment.
// want to avoid unaligned access, so have to use
// smaller operations for less aligned types.
// for example moving [4]byte must use 4 MOVB not 1 MOVW.
align := int(n.Type.Align)
var op int
switch align {
default:
gc.Fatalf("sgen: invalid alignment %d for %v", align, n.Type)
case 1:
op = arm.AMOVB
case 2:
op = arm.AMOVH
case 4:
op = arm.AMOVW
}
if w%int64(align) != 0 {
gc.Fatalf("sgen: unaligned size %d (align=%d) for %v", w, align, n.Type)
}
c := int32(w / int64(align))
if osrc%int64(align) != 0 || odst%int64(align) != 0 {
gc.Fatalf("sgen: unaligned offset src %d or dst %d (align %d)", osrc, odst, align)
}
// if we are copying forward on the stack and
// the src and dst overlap, then reverse direction
dir := align
if osrc < odst && int64(odst) < int64(osrc)+w {
dir = -dir
}
if op == arm.AMOVW && !gc.Nacl && dir > 0 && c >= 4 && c <= 128 {
var r0 gc.Node
r0.Op = gc.OREGISTER
r0.Reg = arm.REG_R0
var r1 gc.Node
r1.Op = gc.OREGISTER
r1.Reg = arm.REG_R0 + 1
var r2 gc.Node
r2.Op = gc.OREGISTER
r2.Reg = arm.REG_R0 + 2
var src gc.Node
gc.Regalloc(&src, gc.Types[gc.Tptr], &r1)
var dst gc.Node
gc.Regalloc(&dst, gc.Types[gc.Tptr], &r2)
if n.Ullman >= res.Ullman {
// eval n first
gc.Agen(n, &src)
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
} else {
// eval res first
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
gc.Agen(n, &src)
}
var tmp gc.Node
gc.Regalloc(&tmp, gc.Types[gc.Tptr], &r0)
f := gc.Sysfunc("duffcopy")
p := gins(obj.ADUFFCOPY, nil, f)
gc.Afunclit(&p.To, f)
// 8 and 128 = magic constants: see ../../runtime/asm_arm.s
p.To.Offset = 8 * (128 - int64(c))
gc.Regfree(&tmp)
gc.Regfree(&src)
gc.Regfree(&dst)
return
}
var dst gc.Node
var src gc.Node
if n.Ullman >= res.Ullman {
gc.Agenr(n, &dst, res) // temporarily use dst
gc.Regalloc(&src, gc.Types[gc.Tptr], nil)
gins(arm.AMOVW, &dst, &src)
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
} else {
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agenr(res, &dst, res)
//.........這裏部分代碼省略.........
示例4: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := nl.Type.Width
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 8 // bytes
q := w / 8 // quads
if q < 4 {
// Write sequence of MOV 0, off(base) instead of using STOSQ.
// The hope is that although the code will be slightly longer,
// the MOVs will have no dependencies and pipeline better
// than the unrolled STOSQ loop.
// NOTE: Must use agen, not igen, so that optimizer sees address
// being taken. We are not writing on field boundaries.
var n1 gc.Node
gc.Agenr(nl, &n1, nil)
n1.Op = gc.OINDREG
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
for {
tmp14 := q
q--
if tmp14 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVQ, &z, &n1)
n1.Xoffset += 8
}
if c >= 4 {
gc.Nodconst(&z, gc.Types[gc.TUINT32], 0)
n1.Type = z.Type
gins(x86.AMOVL, &z, &n1)
n1.Xoffset += 4
c -= 4
}
gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
for {
tmp15 := c
c--
if tmp15 <= 0 {
break
}
n1.Type = z.Type
gins(x86.AMOVB, &z, &n1)
n1.Xoffset++
}
gc.Regfree(&n1)
return
}
var oldn1 gc.Node
var n1 gc.Node
savex(x86.REG_DI, &n1, &oldn1, nil, gc.Types[gc.Tptr])
gc.Agen(nl, &n1)
var ax gc.Node
var oldax gc.Node
savex(x86.REG_AX, &ax, &oldax, nil, gc.Types[gc.Tptr])
gconreg(x86.AMOVL, 0, x86.REG_AX)
if q > 128 || gc.Nacl {
gconreg(movptr, q, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.ASTOSQ, nil, nil) // STOQ AL,*(DI)+
} else {
if di := dzDI(q); di != 0 {
gconreg(addptr, di, x86.REG_DI)
}
p := gins(obj.ADUFFZERO, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
p.To.Offset = dzOff(q)
}
z := ax
di := n1
if w >= 8 && c >= 4 {
di.Op = gc.OINDREG
z.Type = gc.Types[gc.TINT64]
di.Type = z.Type
p := gins(x86.AMOVQ, &z, &di)
p.To.Scale = 1
p.To.Offset = c - 8
} else if c >= 4 {
di.Op = gc.OINDREG
z.Type = gc.Types[gc.TINT32]
//.........這裏部分代碼省略.........
示例5: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
fmt.Printf("clearfat %v (%v, size: %d)\n", nl, nl.Type, nl.Type.Width)
}
w := uint64(nl.Type.Width)
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 8 // bytes
q := w / 8 // dwords
if gc.Reginuse(mips.REGRT1) {
gc.Fatalf("%v in use during clearfat", obj.Rconv(mips.REGRT1))
}
var r0 gc.Node
gc.Nodreg(&r0, gc.Types[gc.TUINT64], mips.REGZERO)
var dst gc.Node
gc.Nodreg(&dst, gc.Types[gc.Tptr], mips.REGRT1)
gc.Regrealloc(&dst)
gc.Agen(nl, &dst)
var boff uint64
if q > 128 {
p := gins(mips.ASUBV, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = 8
var end gc.Node
gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
p = gins(mips.AMOVV, &dst, &end)
p.From.Type = obj.TYPE_ADDR
p.From.Offset = int64(q * 8)
p = gins(mips.AMOVV, &r0, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 8
pl := p
p = gins(mips.AADDV, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = 8
gc.Patch(ginsbranch(mips.ABNE, nil, &dst, &end, 0), pl)
gc.Regfree(&end)
// The loop leaves R1 on the last zeroed dword
boff = 8
// TODO(dfc): https://golang.org/issue/12108
// If DUFFZERO is used inside a tail call (see genwrapper) it will
// overwrite the link register.
} else if false && q >= 4 {
p := gins(mips.ASUBV, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = 8
f := gc.Sysfunc("duffzero")
p = gins(obj.ADUFFZERO, nil, f)
gc.Afunclit(&p.To, f)
// 8 and 128 = magic constants: see ../../runtime/asm_mips64x.s
p.To.Offset = int64(8 * (128 - q))
// duffzero leaves R1 on the last zeroed dword
boff = 8
} else {
var p *obj.Prog
for t := uint64(0); t < q; t++ {
p = gins(mips.AMOVV, &r0, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = int64(8 * t)
}
boff = 8 * q
}
var p *obj.Prog
for t := uint64(0); t < c; t++ {
p = gins(mips.AMOVB, &r0, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = int64(t + boff)
}
gc.Regfree(&dst)
}示例6: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := uint32(nl.Type.Width)
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 4 // bytes
q := w / 4 // quads
var r0 gc.Node
r0.Op = gc.OREGISTER
r0.Reg = arm.REG_R0
var r1 gc.Node
r1.Op = gc.OREGISTER
r1.Reg = arm.REG_R1
var dst gc.Node
gc.Regalloc(&dst, gc.Types[gc.Tptr], &r1)
gc.Agen(nl, &dst)
var nc gc.Node
gc.Nodconst(&nc, gc.Types[gc.TUINT32], 0)
var nz gc.Node
gc.Regalloc(&nz, gc.Types[gc.TUINT32], &r0)
gc.Cgen(&nc, &nz)
if q > 128 {
var end gc.Node
gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
p := gins(arm.AMOVW, &dst, &end)
p.From.Type = obj.TYPE_ADDR
p.From.Offset = int64(q) * 4
p = gins(arm.AMOVW, &nz, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 4
p.Scond |= arm.C_PBIT
pl := p
p = gins(arm.ACMP, &dst, nil)
raddr(&end, p)
gc.Patch(gc.Gbranch(arm.ABNE, nil, 0), pl)
gc.Regfree(&end)
} else if q >= 4 && !gc.Nacl {
f := gc.Sysfunc("duffzero")
p := gins(obj.ADUFFZERO, nil, f)
gc.Afunclit(&p.To, f)
// 4 and 128 = magic constants: see ../../runtime/asm_arm.s
p.To.Offset = 4 * (128 - int64(q))
} else {
var p *obj.Prog
for q > 0 {
p = gins(arm.AMOVW, &nz, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 4
p.Scond |= arm.C_PBIT
//print("1. %v\n", p);
q--
}
}
var p *obj.Prog
for c > 0 {
p = gins(arm.AMOVB, &nz, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 1
p.Scond |= arm.C_PBIT
//print("2. %v\n", p);
c--
}
gc.Regfree(&dst)
gc.Regfree(&nz)
}示例7: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := uint32(nl.Type.Width)
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 4 // bytes
q := w / 4 // quads
if q < 4 {
// Write sequence of MOV 0, off(base) instead of using STOSL.
// The hope is that although the code will be slightly longer,
// the MOVs will have no dependencies and pipeline better
// than the unrolled STOSL loop.
// NOTE: Must use agen, not igen, so that optimizer sees address
// being taken. We are not writing on field boundaries.
var n1 gc.Node
gc.Regalloc(&n1, gc.Types[gc.Tptr], nil)
gc.Agen(nl, &n1)
n1.Op = gc.OINDREG
var z gc.Node
gc.Nodconst(&z, gc.Types[gc.TUINT64], 0)
for ; q > 0; q-- {
n1.Type = z.Type
gins(x86.AMOVL, &z, &n1)
n1.Xoffset += 4
}
gc.Nodconst(&z, gc.Types[gc.TUINT8], 0)
for ; c > 0; c-- {
n1.Type = z.Type
gins(x86.AMOVB, &z, &n1)
n1.Xoffset++
}
gc.Regfree(&n1)
return
}
var n1 gc.Node
gc.Nodreg(&n1, gc.Types[gc.Tptr], x86.REG_DI)
gc.Agen(nl, &n1)
gconreg(x86.AMOVL, 0, x86.REG_AX)
if q > 128 || (q >= 4 && gc.Nacl) {
gconreg(x86.AMOVL, int64(q), x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.ASTOSL, nil, nil) // STOL AL,*(DI)+
} else if q >= 4 {
p := gins(obj.ADUFFZERO, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
// 1 and 128 = magic constants: see ../../runtime/asm_386.s
p.To.Offset = 1 * (128 - int64(q))
} else {
for q > 0 {
gins(x86.ASTOSL, nil, nil) // STOL AL,*(DI)+
q--
}
}
for c > 0 {
gins(x86.ASTOSB, nil, nil) // STOB AL,*(DI)+
c--
}
}示例8: clearfat
// clearfat clears (i.e. replaces with zeros) the value pointed to by nl.
func clearfat(nl *gc.Node) {
if gc.Debug['g'] != 0 {
fmt.Printf("clearfat %v (%v, size: %d)\n", nl, nl.Type, nl.Type.Width)
}
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
var dst gc.Node
gc.Regalloc(&dst, gc.Types[gc.Tptr], nil)
gc.Agen(nl, &dst)
var boff int64
w := nl.Type.Width
if w > clearLoopCutoff {
// Generate a loop clearing 256 bytes per iteration using XCs.
var end gc.Node
gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
p := gins(s390x.AMOVD, &dst, &end)
p.From.Type = obj.TYPE_ADDR
p.From.Offset = w - (w % 256)
p = gins(s390x.AXC, &dst, &dst)
p.From.Type = obj.TYPE_MEM
p.From.Offset = 0
p.To.Type = obj.TYPE_MEM
p.To.Offset = 0
p.From3 = new(obj.Addr)
p.From3.Offset = 256
p.From3.Type = obj.TYPE_CONST
pl := p
ginscon(s390x.AADD, 256, &dst)
gins(s390x.ACMP, &dst, &end)
gc.Patch(gc.Gbranch(s390x.ABNE, nil, 0), pl)
gc.Regfree(&end)
w = w % 256
}
// Generate instructions to clear the remaining memory.
for w > 0 {
n := w
// Can clear at most 256 bytes per instruction.
if n > 256 {
n = 256
}
switch n {
// Handle very small clears using moves.
case 8, 4, 2, 1:
ins := s390x.AMOVB
switch n {
case 8:
ins = s390x.AMOVD
case 4:
ins = s390x.AMOVW
case 2:
ins = s390x.AMOVH
}
p := gins(ins, nil, &dst)
p.From.Type = obj.TYPE_CONST
p.From.Offset = 0
p.To.Type = obj.TYPE_MEM
p.To.Offset = boff
// Handle clears that would require multiple moves with a XC.
default:
p := gins(s390x.AXC, &dst, &dst)
p.From.Type = obj.TYPE_MEM
p.From.Offset = boff
p.To.Type = obj.TYPE_MEM
p.To.Offset = boff
p.From3 = new(obj.Addr)
p.From3.Offset = n
p.From3.Type = obj.TYPE_CONST
}
boff += n
w -= n
}
gc.Regfree(&dst)
}示例9: sudoaddable
/*
* generate code to compute address of n,
* a reference to a (perhaps nested) field inside
* an array or struct.
* return 0 on failure, 1 on success.
* on success, leaves usable address in a.
*
* caller is responsible for calling sudoclean
* after successful sudoaddable,
* to release the register used for a.
*/
func sudoaddable(as int, n *gc.Node, a *obj.Addr) bool {
if n.Type == nil {
return false
}
*a = obj.Addr{}
switch n.Op {
case gc.OLITERAL:
if !gc.Isconst(n, gc.CTINT) {
break
}
v := n.Int()
if v >= 32000 || v <= -32000 {
break
}
switch as {
default:
return false
case arm.AADD,
arm.ASUB,
arm.AAND,
arm.AORR,
arm.AEOR,
arm.AMOVB,
arm.AMOVBS,
arm.AMOVBU,
arm.AMOVH,
arm.AMOVHS,
arm.AMOVHU,
arm.AMOVW:
break
}
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
gc.Naddr(a, n)
return true
case gc.ODOT,
gc.ODOTPTR:
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
var nn *gc.Node
var oary [10]int64
o := gc.Dotoffset(n, oary[:], &nn)
if nn == nil {
sudoclean()
return false
}
if nn.Addable && o == 1 && oary[0] >= 0 {
// directly addressable set of DOTs
n1 := *nn
n1.Type = n.Type
n1.Xoffset += oary[0]
gc.Naddr(a, &n1)
return true
}
gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
n1 := *reg
n1.Op = gc.OINDREG
if oary[0] >= 0 {
gc.Agen(nn, reg)
n1.Xoffset = oary[0]
} else {
gc.Cgen(nn, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[0] + 1)
}
for i := 1; i < o; i++ {
if oary[i] >= 0 {
gc.Fatal("can't happen")
}
gins(arm.AMOVW, &n1, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[i] + 1)
}
//.........這裏部分代碼省略.........
示例10: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
w := nl.Type.Width
if w > 1024 || (w >= 64 && (gc.Nacl || isPlan9)) {
var oldn1 gc.Node
var n1 gc.Node
savex(x86.REG_DI, &n1, &oldn1, nil, gc.Types[gc.Tptr])
gc.Agen(nl, &n1)
var ax gc.Node
var oldax gc.Node
savex(x86.REG_AX, &ax, &oldax, nil, gc.Types[gc.Tptr])
gconreg(x86.AMOVL, 0, x86.REG_AX)
gconreg(movptr, w/8, x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.ASTOSQ, nil, nil) // STOQ AL,*(DI)+
if w%8 != 0 {
n1.Op = gc.OINDREG
clearfat_tail(&n1, w%8)
}
restx(&n1, &oldn1)
restx(&ax, &oldax)
return
}
if w >= 64 {
var oldn1 gc.Node
var n1 gc.Node
savex(x86.REG_DI, &n1, &oldn1, nil, gc.Types[gc.Tptr])
gc.Agen(nl, &n1)
var vec_zero gc.Node
var old_x0 gc.Node
savex(x86.REG_X0, &vec_zero, &old_x0, nil, gc.Types[gc.TFLOAT64])
gins(x86.AXORPS, &vec_zero, &vec_zero)
if di := dzDI(w); di != 0 {
gconreg(addptr, di, x86.REG_DI)
}
p := gins(obj.ADUFFZERO, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
p.To.Offset = dzOff(w)
if w%16 != 0 {
n1.Op = gc.OINDREG
n1.Xoffset -= 16 - w%16
gins(x86.AMOVUPS, &vec_zero, &n1)
}
restx(&vec_zero, &old_x0)
restx(&n1, &oldn1)
return
}
// NOTE: Must use agen, not igen, so that optimizer sees address
// being taken. We are not writing on field boundaries.
var n1 gc.Node
gc.Agenr(nl, &n1, nil)
n1.Op = gc.OINDREG
clearfat_tail(&n1, w)
gc.Regfree(&n1)
}示例11: sudoaddable
//.........這裏部分代碼省略.........
s390x.AMOVBZ,
s390x.AMOVH,
s390x.AMOVHZ,
s390x.AMOVW,
s390x.AMOVWZ,
s390x.AMOVD:
if int64(int32(v)) != v {
return false
}
// for comparisons avoid immediates unless they can
// fit into a int8/uint8
// this favours combined compare and branch instructions
case s390x.ACMP:
if int64(int8(v)) != v {
return false
}
case s390x.ACMPU:
if int64(uint8(v)) != v {
return false
}
}
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
gc.Naddr(a, n)
return true
case gc.ODOT,
gc.ODOTPTR:
cleani += 2
reg := &clean[cleani-1]
reg1 := &clean[cleani-2]
reg.Op = gc.OEMPTY
reg1.Op = gc.OEMPTY
var nn *gc.Node
var oary [10]int64
o := gc.Dotoffset(n, oary[:], &nn)
if nn == nil {
sudoclean()
return false
}
if nn.Addable && o == 1 && oary[0] >= 0 {
// directly addressable set of DOTs
n1 := *nn
n1.Type = n.Type
n1.Xoffset += oary[0]
// check that the offset fits into a 12-bit displacement
if n1.Xoffset < 0 || n1.Xoffset >= (1<<12)-8 {
sudoclean()
return false
}
gc.Naddr(a, &n1)
return true
}
gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
n1 := *reg
n1.Op = gc.OINDREG
if oary[0] >= 0 {
gc.Agen(nn, reg)
n1.Xoffset = oary[0]
} else {
gc.Cgen(nn, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[0] + 1)
}
for i := 1; i < o; i++ {
if oary[i] >= 0 {
gc.Fatalf("can't happen")
}
gins(s390x.AMOVD, &n1, reg)
gc.Cgen_checknil(reg)
n1.Xoffset = -(oary[i] + 1)
}
a.Type = obj.TYPE_NONE
a.Index = 0
// check that the offset fits into a 12-bit displacement
if n1.Xoffset < 0 || n1.Xoffset >= (1<<12)-8 {
tmp := n1
tmp.Op = gc.OREGISTER
tmp.Type = gc.Types[gc.Tptr]
tmp.Xoffset = 0
gc.Cgen_checknil(&tmp)
ginscon(s390x.AADD, n1.Xoffset, &tmp)
n1.Xoffset = 0
}
gc.Naddr(a, &n1)
return true
}
return false
}示例12: blockcopy
// blockcopy copies w bytes from &n to &res
func blockcopy(n, res *gc.Node, osrc, odst, w int64) {
var dst gc.Node
var src gc.Node
if n.Ullman >= res.Ullman {
gc.Agenr(n, &dst, res) // temporarily use dst
gc.Regalloc(&src, gc.Types[gc.Tptr], nil)
gins(s390x.AMOVD, &dst, &src)
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
} else {
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agenr(res, &dst, res)
gc.Agenr(n, &src, nil)
}
defer gc.Regfree(&src)
defer gc.Regfree(&dst)
var tmp gc.Node
gc.Regalloc(&tmp, gc.Types[gc.Tptr], nil)
defer gc.Regfree(&tmp)
offset := int64(0)
dir := _FORWARDS
if osrc < odst && odst < osrc+w {
// Reverse. Can't use MVC, fall back onto basic moves.
dir = _BACKWARDS
const copiesPerIter = 2
if w >= 8*copiesPerIter {
cnt := w - (w % (8 * copiesPerIter))
ginscon(s390x.AADD, w, &src)
ginscon(s390x.AADD, w, &dst)
var end gc.Node
gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
p := gins(s390x.ASUB, nil, &end)
p.From.Type = obj.TYPE_CONST
p.From.Offset = cnt
p.Reg = src.Reg
var label *obj.Prog
for i := 0; i < copiesPerIter; i++ {
offset := int64(-8 * (i + 1))
p := gins(s390x.AMOVD, &src, &tmp)
p.From.Type = obj.TYPE_MEM
p.From.Offset = offset
if i == 0 {
label = p
}
p = gins(s390x.AMOVD, &tmp, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = offset
}
ginscon(s390x.ASUB, 8*copiesPerIter, &src)
ginscon(s390x.ASUB, 8*copiesPerIter, &dst)
gins(s390x.ACMP, &src, &end)
gc.Patch(gc.Gbranch(s390x.ABNE, nil, 0), label)
gc.Regfree(&end)
w -= cnt
} else {
offset = w
}
}
if dir == _FORWARDS && w > 1024 {
// Loop over MVCs
cnt := w - (w % 256)
var end gc.Node
gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
add := gins(s390x.AADD, nil, &end)
add.From.Type = obj.TYPE_CONST
add.From.Offset = cnt
add.Reg = src.Reg
mvc := gins(s390x.AMVC, &src, &dst)
mvc.From.Type = obj.TYPE_MEM
mvc.From.Offset = 0
mvc.To.Type = obj.TYPE_MEM
mvc.To.Offset = 0
mvc.From3 = new(obj.Addr)
mvc.From3.Type = obj.TYPE_CONST
mvc.From3.Offset = 256
ginscon(s390x.AADD, 256, &src)
ginscon(s390x.AADD, 256, &dst)
gins(s390x.ACMP, &src, &end)
gc.Patch(gc.Gbranch(s390x.ABNE, nil, 0), mvc)
gc.Regfree(&end)
w -= cnt
}
for w > 0 {
//.........這裏部分代碼省略.........
示例13: blockcopy
func blockcopy(n, res *gc.Node, osrc, odst, w int64) {
var dst gc.Node
gc.Nodreg(&dst, gc.Types[gc.Tptr], x86.REG_DI)
var src gc.Node
gc.Nodreg(&src, gc.Types[gc.Tptr], x86.REG_SI)
var tsrc gc.Node
gc.Tempname(&tsrc, gc.Types[gc.Tptr])
var tdst gc.Node
gc.Tempname(&tdst, gc.Types[gc.Tptr])
if !n.Addable {
gc.Agen(n, &tsrc)
}
if !res.Addable {
gc.Agen(res, &tdst)
}
if n.Addable {
gc.Agen(n, &src)
} else {
gmove(&tsrc, &src)
}
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
if res.Addable {
gc.Agen(res, &dst)
} else {
gmove(&tdst, &dst)
}
c := int32(w % 4) // bytes
q := int32(w / 4) // doublewords
// if we are copying forward on the stack and
// the src and dst overlap, then reverse direction
if osrc < odst && odst < osrc+w {
// reverse direction
gins(x86.ASTD, nil, nil) // set direction flag
if c > 0 {
gconreg(x86.AADDL, w-1, x86.REG_SI)
gconreg(x86.AADDL, w-1, x86.REG_DI)
gconreg(x86.AMOVL, int64(c), x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSB, nil, nil) // MOVB *(SI)-,*(DI)-
}
if q > 0 {
if c > 0 {
gconreg(x86.AADDL, -3, x86.REG_SI)
gconreg(x86.AADDL, -3, x86.REG_DI)
} else {
gconreg(x86.AADDL, w-4, x86.REG_SI)
gconreg(x86.AADDL, w-4, x86.REG_DI)
}
gconreg(x86.AMOVL, int64(q), x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSL, nil, nil) // MOVL *(SI)-,*(DI)-
}
// we leave with the flag clear
gins(x86.ACLD, nil, nil)
} else {
gins(x86.ACLD, nil, nil) // paranoia. TODO(rsc): remove?
// normal direction
if q > 128 || (q >= 4 && gc.Nacl) {
gconreg(x86.AMOVL, int64(q), x86.REG_CX)
gins(x86.AREP, nil, nil) // repeat
gins(x86.AMOVSL, nil, nil) // MOVL *(SI)+,*(DI)+
} else if q >= 4 {
p := gins(obj.ADUFFCOPY, nil, nil)
p.To.Type = obj.TYPE_ADDR
p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
// 10 and 128 = magic constants: see ../../runtime/asm_386.s
p.To.Offset = 10 * (128 - int64(q))
} else if !gc.Nacl && c == 0 {
var cx gc.Node
gc.Nodreg(&cx, gc.Types[gc.TINT32], x86.REG_CX)
// We don't need the MOVSL side-effect of updating SI and DI,
// and issuing a sequence of MOVLs directly is faster.
src.Op = gc.OINDREG
dst.Op = gc.OINDREG
for q > 0 {
gmove(&src, &cx) // MOVL x+(SI),CX
gmove(&cx, &dst) // MOVL CX,x+(DI)
src.Xoffset += 4
dst.Xoffset += 4
q--
}
} else {
for q > 0 {
gins(x86.AMOVSL, nil, nil) // MOVL *(SI)+,*(DI)+
q--
//.........這裏部分代碼省略.........