Golang obj.Addr類代碼示例

// copysub substitute s for v in a.
// copysub returns true on failure to substitute.
// TODO(dfc) reverse this logic to return false on sunstitution failure.
func copysub(a *obj.Addr, v *obj.Addr, s *obj.Addr, f bool) bool {
	if copyas(a, v) {
		if s.Reg >= x86.REG_AX && s.Reg <= x86.REG_DI || s.Reg >= x86.REG_X0 && s.Reg <= x86.REG_X7 {
			if f {
				a.Reg = s.Reg
			}
		}
		return false
	}

	if regtyp(v) {
		if (a.Type == obj.TYPE_MEM || a.Type == obj.TYPE_ADDR) && a.Reg == v.Reg {
			if (s.Reg == x86.REG_BP) && a.Index != x86.REG_NONE {
				return true /* can't use BP-base with index */
			}
			if f {
				a.Reg = s.Reg
			}
		}

		if a.Index == v.Reg {
			if f {
				a.Index = s.Reg
			}
		}
	}
	return false
}

func nacladdr(ctxt *obj.Link, p *obj.Prog, a *obj.Addr) {
	if p.As == ALEAL || p.As == ALEAQ {
		return
	}

	if a.Reg == REG_BP {
		ctxt.Diag("invalid address: %v", p)
		return
	}

	if a.Reg == REG_TLS {
		a.Reg = REG_BP
	}
	if a.Type == obj.TYPE_MEM && a.Name == obj.NAME_NONE {
		switch a.Reg {
		// all ok
		case REG_BP, REG_SP, REG_R15:
			break

		default:
			if a.Index != REG_NONE {
				ctxt.Diag("invalid address %v", p)
			}
			a.Index = a.Reg
			if a.Index != REG_NONE {
				a.Scale = 1
			}
			a.Reg = REG_R15
		}
	}
}

func addreg(a *obj.Addr, rn int) {
	a.Sym = nil
	a.Node = nil
	a.Offset = 0
	a.Type = obj.TYPE_REG
	a.Reg = int16(rn)
	a.Name = 0

	Ostats.Ncvtreg++
}

/*
 * generate code to compute address of n,
 * a reference to a (perhaps nested) field inside
 * an array or struct.
 * return 0 on failure, 1 on success.
 * on success, leaves usable address in a.
 *
 * caller is responsible for calling sudoclean
 * after successful sudoaddable,
 * to release the register used for a.
 */
func sudoaddable(as obj.As, n *gc.Node, a *obj.Addr) bool {
	if n.Type == nil {
		return false
	}

	*a = obj.Addr{}

	switch n.Op {
	case gc.OLITERAL:
		if !gc.Isconst(n, gc.CTINT) {
			break
		}
		v := n.Int64()
		if v >= 32000 || v <= -32000 {
			break
		}
		switch as {
		default:
			return false

		case arm.AADD,
			arm.ASUB,
			arm.AAND,
			arm.AORR,
			arm.AEOR,
			arm.AMOVB,
			arm.AMOVBS,
			arm.AMOVBU,
			arm.AMOVH,
			arm.AMOVHS,
			arm.AMOVHU,
			arm.AMOVW:
			break
		}

		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		gc.Naddr(a, n)
		return true

	case gc.ODOT,
		gc.ODOTPTR:
		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		var nn *gc.Node
		var oary [10]int64
		o := gc.Dotoffset(n, oary[:], &nn)
		if nn == nil {
			sudoclean()
			return false
		}

		if nn.Addable && o == 1 && oary[0] >= 0 {
			// directly addressable set of DOTs
			n1 := *nn

			n1.Type = n.Type
			n1.Xoffset += oary[0]
			gc.Naddr(a, &n1)
			return true
		}

		gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
		n1 := *reg
		n1.Op = gc.OINDREG
		if oary[0] >= 0 {
			gc.Agen(nn, reg)
			n1.Xoffset = oary[0]
		} else {
			gc.Cgen(nn, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[0] + 1)
		}

		for i := 1; i < o; i++ {
			if oary[i] >= 0 {
				gc.Fatalf("can't happen")
			}
			gins(arm.AMOVW, &n1, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[i] + 1)
		}

//.........這裏部分代碼省略.........

// Naddr rewrites a to refer to n.
// It assumes that a is zeroed on entry.
func Naddr(a *obj.Addr, n *Node) {
	if n == nil {
		return
	}

	if n.Type != nil && n.Type.Etype != TIDEAL {
		// TODO(rsc): This is undone by the selective clearing of width below,
		// to match architectures that were not as aggressive in setting width
		// during naddr. Those widths must be cleared to avoid triggering
		// failures in gins when it detects real but heretofore latent (and one
		// hopes innocuous) type mismatches.
		// The type mismatches should be fixed and the clearing below removed.
		dowidth(n.Type)

		a.Width = n.Type.Width
	}

	switch n.Op {
	default:
		a := a // copy to let escape into Ctxt.Dconv
		Debug['h'] = 1
		Dump("naddr", n)
		Fatalf("naddr: bad %v %v", n.Op, Ctxt.Dconv(a))

	case OREGISTER:
		a.Type = obj.TYPE_REG
		a.Reg = n.Reg
		a.Sym = nil
		if Thearch.LinkArch.Family == sys.I386 { // TODO(rsc): Never clear a->width.
			a.Width = 0
		}

	case OINDREG:
		a.Type = obj.TYPE_MEM
		a.Reg = n.Reg
		a.Sym = Linksym(n.Sym)
		a.Offset = n.Xoffset
		if a.Offset != int64(int32(a.Offset)) {
			Yyerror("offset %d too large for OINDREG", a.Offset)
		}
		if Thearch.LinkArch.Family == sys.I386 { // TODO(rsc): Never clear a->width.
			a.Width = 0
		}

	case OCLOSUREVAR:
		if !Curfn.Func.Needctxt {
			Fatalf("closurevar without needctxt")
		}
		a.Type = obj.TYPE_MEM
		a.Reg = int16(Thearch.REGCTXT)
		a.Sym = nil
		a.Offset = n.Xoffset

	case OCFUNC:
		Naddr(a, n.Left)
		a.Sym = Linksym(n.Left.Sym)

	case ONAME:
		a.Etype = 0
		if n.Type != nil {
			a.Etype = uint8(Simtype[n.Type.Etype])
		}
		a.Offset = n.Xoffset
		s := n.Sym
		a.Node = n.Orig

		//if(a->node >= (Node*)&n)
		//	fatal("stack node");
		if s == nil {
			s = Lookup(".noname")
		}
		if n.Name.Method && n.Type != nil && n.Type.Sym != nil && n.Type.Sym.Pkg != nil {
			s = Pkglookup(s.Name, n.Type.Sym.Pkg)
		}

		a.Type = obj.TYPE_MEM
		switch n.Class {
		default:
			Fatalf("naddr: ONAME class %v %d\n", n.Sym, n.Class)

		case PEXTERN:
			a.Name = obj.NAME_EXTERN

		case PAUTO:
			a.Name = obj.NAME_AUTO

		case PPARAM, PPARAMOUT:
			a.Name = obj.NAME_PARAM

		case PFUNC:
			a.Name = obj.NAME_EXTERN
			a.Type = obj.TYPE_ADDR
			a.Width = int64(Widthptr)
			s = funcsym(s)
		}

		a.Sym = Linksym(s)

//.........這裏部分代碼省略.........

func Afunclit(a *obj.Addr, n *Node) {
	if a.Type == obj.TYPE_ADDR && a.Name == obj.NAME_EXTERN {
		a.Type = obj.TYPE_MEM
		a.Sym = Linksym(n.Sym)
	}
}

func mkvar(f *Flow, a *obj.Addr) Bits {
	// mark registers used
	if a.Type == obj.TYPE_NONE {
		return zbits
	}

	r := f.Data.(*Reg)
	r.use1.b[0] |= Thearch.Doregbits(int(a.Index)) // TODO: Use RtoB

	var n int
	switch a.Type {
	default:
		regu := Thearch.Doregbits(int(a.Reg)) | Thearch.RtoB(int(a.Reg)) // TODO: Use RtoB
		if regu == 0 {
			return zbits
		}
		bit := zbits
		bit.b[0] = regu
		return bit

		// TODO(rsc): Remove special case here.
	case obj.TYPE_ADDR:
		var bit Bits
		if Thearch.LinkArch.InFamily(sys.MIPS64, sys.ARM, sys.ARM64, sys.PPC64) {
			goto memcase
		}
		a.Type = obj.TYPE_MEM
		bit = mkvar(f, a)
		setaddrs(bit)
		a.Type = obj.TYPE_ADDR
		Ostats.Naddr++
		return zbits

	memcase:
		fallthrough

	case obj.TYPE_MEM:
		if r != nil {
			r.use1.b[0] |= Thearch.RtoB(int(a.Reg))
		}

		/* NOTE: 5g did
		if(r->f.prog->scond & (C_PBIT|C_WBIT))
			r->set.b[0] |= RtoB(a->reg);
		*/
		switch a.Name {
		default:
			// Note: This case handles NAME_EXTERN and NAME_STATIC.
			// We treat these as requiring eager writes to memory, due to
			// the possibility of a fault handler looking at them, so there is
			// not much point in registerizing the loads.
			// If we later choose the set of candidate variables from a
			// larger list, these cases could be deprioritized instead of
			// removed entirely.
			return zbits

		case obj.NAME_PARAM,
			obj.NAME_AUTO:
			n = int(a.Name)
		}
	}

	node, _ := a.Node.(*Node)
	if node == nil || node.Op != ONAME || node.Orig == nil {
		return zbits
	}
	node = node.Orig
	if node.Orig != node {
		Fatalf("%v: bad node", Ctxt.Dconv(a))
	}
	if node.Sym == nil || node.Sym.Name[0] == '.' {
		return zbits
	}
	et := EType(a.Etype)
	o := a.Offset
	w := a.Width
	if w < 0 {
		Fatalf("bad width %d for %v", w, Ctxt.Dconv(a))
	}

	flag := 0
	var v *Var
	for i := 0; i < nvar; i++ {
		v = &vars[i]
		if v.node == node && int(v.name) == n {
			if v.offset == o {
				if v.etype == et {
					if int64(v.width) == w {
						// TODO(rsc): Remove special case for arm here.
						if flag == 0 || Thearch.LinkArch.Family != sys.ARM {
							return blsh(uint(i))
						}
					}
				}
			}

			// if they overlap, disable both
			if overlap_reg(v.offset, v.width, o, int(w)) {
				//				print("disable overlap %s %d %d %d %d, %E != %E\n", s->name, v->offset, v->width, o, w, v->etype, et);
				v.addr = 1
//.........這裏部分代碼省略.........

/*
 * xtramodes enables the ARM post increment and
 * shift offset addressing modes to transform
 *   MOVW   0(R3),R1
 *   ADD    $4,R3,R3
 * into
 *   MOVW.P 4(R3),R1
 * and
 *   ADD    R0,R1
 *   MOVBU  0(R1),R0
 * into
 *   MOVBU  R0<<0(R1),R0
 */
func xtramodes(g *gc.Graph, r *gc.Flow, a *obj.Addr) bool {
	p := r.Prog
	v := *a
	v.Type = obj.TYPE_REG
	r1 := findpre(r, &v)
	if r1 != nil {
		p1 := r1.Prog
		if p1.To.Type == obj.TYPE_REG && p1.To.Reg == v.Reg {
			switch p1.As {
			case arm.AADD:
				if p1.Scond&arm.C_SBIT != 0 {
					// avoid altering ADD.S/ADC sequences.
					break
				}

				if p1.From.Type == obj.TYPE_REG || (p1.From.Type == obj.TYPE_SHIFT && p1.From.Offset&(1<<4) == 0 && ((p.As != arm.AMOVB && p.As != arm.AMOVBS) || (a == &p.From && p1.From.Offset&^0xf == 0))) || ((p1.From.Type == obj.TYPE_ADDR || p1.From.Type == obj.TYPE_CONST) && p1.From.Offset > -4096 && p1.From.Offset < 4096) {
					if nochange(gc.Uniqs(r1), r, p1) {
						if a != &p.From || v.Reg != p.To.Reg {
							if finduse(g, r.S1, &v) {
								if p1.Reg == 0 || p1.Reg == v.Reg {
									/* pre-indexing */
									p.Scond |= arm.C_WBIT
								} else {
									return false
								}
							}
						}

						switch p1.From.Type {
						/* register offset */
						case obj.TYPE_REG:
							if gc.Nacl {
								return false
							}
							*a = obj.Addr{}
							a.Type = obj.TYPE_SHIFT
							a.Offset = int64(p1.From.Reg) & 15

							/* scaled register offset */
						case obj.TYPE_SHIFT:
							if gc.Nacl {
								return false
							}
							*a = obj.Addr{}
							a.Type = obj.TYPE_SHIFT
							fallthrough

							/* immediate offset */
						case obj.TYPE_CONST,
							obj.TYPE_ADDR:
							a.Offset = p1.From.Offset
						}

						if p1.Reg != 0 {
							a.Reg = p1.Reg
						}
						excise(r1)
						return true
					}
				}

			case arm.AMOVW:
				if p1.From.Type == obj.TYPE_REG {
					r2 := findinc(r1, r, &p1.From)
					if r2 != nil {
						var r3 *gc.Flow
						for r3 = gc.Uniqs(r2); r3.Prog.As == obj.ANOP; r3 = gc.Uniqs(r3) {
						}
						if r3 == r {
							/* post-indexing */
							p1 := r2.Prog

							a.Reg = p1.To.Reg
							a.Offset = p1.From.Offset
							p.Scond |= arm.C_PBIT
							if !finduse(g, r, &r1.Prog.To) {
								excise(r1)
							}
							excise(r2)
							return true
						}
					}
				}
			}
		}
	}

//.........這裏部分代碼省略.........

/*
 * ASLL x,y,w
 * .. (not use w, not set x y w)
 * AXXX w,a,b (a != w)
 * .. (not use w)
 * (set w)
 * ----------- changed to
 * ..
 * AXXX (x<<y),a,b
 * ..
 */
func shiftprop(r *gc.Flow) bool {
	p := r.Prog
	if p.To.Type != obj.TYPE_REG {
		if gc.Debug['P'] != 0 {
			fmt.Printf("\tBOTCH: result not reg; FAILURE\n")
		}
		return false
	}

	n := p.To.Reg
	var a obj.Addr
	if p.Reg != 0 && p.Reg != p.To.Reg {
		a.Type = obj.TYPE_REG
		a.Reg = p.Reg
	}

	if gc.Debug['P'] != 0 {
		fmt.Printf("shiftprop\n%v", p)
	}
	r1 := r
	var p1 *obj.Prog
	for {
		/* find first use of shift result; abort if shift operands or result are changed */
		r1 = gc.Uniqs(r1)

		if r1 == nil {
			if gc.Debug['P'] != 0 {
				fmt.Printf("\tbranch; FAILURE\n")
			}
			return false
		}

		if gc.Uniqp(r1) == nil {
			if gc.Debug['P'] != 0 {
				fmt.Printf("\tmerge; FAILURE\n")
			}
			return false
		}

		p1 = r1.Prog
		if gc.Debug['P'] != 0 {
			fmt.Printf("\n%v", p1)
		}
		switch copyu(p1, &p.To, nil) {
		case 0: /* not used or set */
			if (p.From.Type == obj.TYPE_REG && copyu(p1, &p.From, nil) > 1) || (a.Type == obj.TYPE_REG && copyu(p1, &a, nil) > 1) {
				if gc.Debug['P'] != 0 {
					fmt.Printf("\targs modified; FAILURE\n")
				}
				return false
			}

			continue
		case 3: /* set, not used */
			{
				if gc.Debug['P'] != 0 {
					fmt.Printf("\tBOTCH: noref; FAILURE\n")
				}
				return false
			}
		}

		break
	}

	/* check whether substitution can be done */
	switch p1.As {
	default:
		if gc.Debug['P'] != 0 {
			fmt.Printf("\tnon-dpi; FAILURE\n")
		}
		return false

	case arm.AAND,
		arm.AEOR,
		arm.AADD,
		arm.AADC,
		arm.AORR,
		arm.ASUB,
		arm.ASBC,
		arm.ARSB,
		arm.ARSC:
		if p1.Reg == n || (p1.Reg == 0 && p1.To.Type == obj.TYPE_REG && p1.To.Reg == n) {
			if p1.From.Type != obj.TYPE_REG {
				if gc.Debug['P'] != 0 {
					fmt.Printf("\tcan't swap; FAILURE\n")
				}
				return false
			}
//.........這裏部分代碼省略.........