當前位置: 首頁>>代碼示例>>Golang>>正文

Golang ld.Linklookup函數代碼示例

本文整理匯總了Golang中bootstrap/link/internal/ld.Linklookup函數的典型用法代碼示例。如果您正苦於以下問題：Golang Linklookup函數的具體用法？Golang Linklookup怎麽用？Golang Linklookup使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。


在下文中一共展示了Linklookup函數的11個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: elfsetupplt

func elfsetupplt() {
	plt := ld.Linklookup(ld.Ctxt, ".plt", 0)
	got := ld.Linklookup(ld.Ctxt, ".got.plt", 0)
	if plt.Size == 0 {
		// pushl got+4
		ld.Adduint8(ld.Ctxt, plt, 0xff)

		ld.Adduint8(ld.Ctxt, plt, 0x35)
		ld.Addaddrplus(ld.Ctxt, plt, got, 4)

		// jmp *got+8
		ld.Adduint8(ld.Ctxt, plt, 0xff)

		ld.Adduint8(ld.Ctxt, plt, 0x25)
		ld.Addaddrplus(ld.Ctxt, plt, got, 8)

		// zero pad
		ld.Adduint32(ld.Ctxt, plt, 0)

		// assume got->size == 0 too
		ld.Addaddrplus(ld.Ctxt, got, ld.Linklookup(ld.Ctxt, ".dynamic", 0), 0)

		ld.Adduint32(ld.Ctxt, got, 0)
		ld.Adduint32(ld.Ctxt, got, 0)
	}
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:26，代碼來源:asm.go

示例2: ensureglinkresolver

// Generate the glink resolver stub if necessary and return the .glink section
func ensureglinkresolver() *ld.LSym {
	glink := ld.Linklookup(ld.Ctxt, ".glink", 0)
	if glink.Size != 0 {
		return glink
	}

	// This is essentially the resolver from the ppc64 ELF ABI.
	// At entry, r12 holds the address of the symbol resolver stub
	// for the target routine and the argument registers hold the
	// arguments for the target routine.
	//
	// This stub is PIC, so first get the PC of label 1 into r11.
	// Other things will be relative to this.
	ld.Adduint32(ld.Ctxt, glink, 0x7c0802a6) // mflr r0
	ld.Adduint32(ld.Ctxt, glink, 0x429f0005) // bcl 20,31,1f
	ld.Adduint32(ld.Ctxt, glink, 0x7d6802a6) // 1: mflr r11
	ld.Adduint32(ld.Ctxt, glink, 0x7c0803a6) // mtlf r0

	// Compute the .plt array index from the entry point address.
	// Because this is PIC, everything is relative to label 1b (in
	// r11):
	//   r0 = ((r12 - r11) - (res_0 - r11)) / 4 = (r12 - res_0) / 4
	ld.Adduint32(ld.Ctxt, glink, 0x3800ffd0) // li r0,-(res_0-1b)=-48
	ld.Adduint32(ld.Ctxt, glink, 0x7c006214) // add r0,r0,r12
	ld.Adduint32(ld.Ctxt, glink, 0x7c0b0050) // sub r0,r0,r11
	ld.Adduint32(ld.Ctxt, glink, 0x7800f082) // srdi r0,r0,2

	// r11 = address of the first byte of the PLT
	r := ld.Addrel(glink)

	r.Off = int32(glink.Size)
	r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
	r.Siz = 8
	r.Type = obj.R_ADDRPOWER

	ld.Adduint32(ld.Ctxt, glink, 0x3d600000) // addis r11,0,[email protected]
	ld.Adduint32(ld.Ctxt, glink, 0x396b0000) // addi r11,r11,[email protected]

	// Load r12 = dynamic resolver address and r11 = DSO
	// identifier from the first two doublewords of the PLT.
	ld.Adduint32(ld.Ctxt, glink, 0xe98b0000) // ld r12,0(r11)
	ld.Adduint32(ld.Ctxt, glink, 0xe96b0008) // ld r11,8(r11)

	// Jump to the dynamic resolver
	ld.Adduint32(ld.Ctxt, glink, 0x7d8903a6) // mtctr r12
	ld.Adduint32(ld.Ctxt, glink, 0x4e800420) // bctr

	// The symbol resolvers must immediately follow.
	//   res_0:

	// Add DT_PPC64_GLINK .dynamic entry, which points to 32 bytes
	// before the first symbol resolver stub.
	s := ld.Linklookup(ld.Ctxt, ".dynamic", 0)

	ld.Elfwritedynentsymplus(s, ld.DT_PPC64_GLINK, glink, glink.Size-32)

	return glink
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:59，代碼來源:asm.go

示例3: gentext

func gentext() {
	if !ld.DynlinkingGo() {
		return
	}
	addmoduledata := ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
	if addmoduledata.Type == obj.STEXT {
		// we're linking a module containing the runtime -> no need for
		// an init function
		return
	}
	addmoduledata.Reachable = true
	initfunc := ld.Linklookup(ld.Ctxt, "go.link.addmoduledata", 0)
	initfunc.Type = obj.STEXT
	initfunc.Local = true
	initfunc.Reachable = true
	o := func(op uint32) {
		ld.Adduint32(ld.Ctxt, initfunc, op)
	}
	// 0000000000000000 <local.dso_init>:
	// 0:	90000000 	adrp	x0, 0 <runtime.firstmoduledata>
	// 	0: R_AARCH64_ADR_PREL_PG_HI21	local.moduledata
	// 4:	91000000 	add	x0, x0, #0x0
	// 	4: R_AARCH64_ADD_ABS_LO12_NC	local.moduledata
	o(0x90000000)
	o(0x91000000)
	rel := ld.Addrel(initfunc)
	rel.Off = 0
	rel.Siz = 8
	rel.Sym = ld.Ctxt.Moduledata
	rel.Type = obj.R_ADDRARM64

	// 8:	14000000 	bl	0 <runtime.addmoduledata>
	// 	8: R_AARCH64_CALL26	runtime.addmoduledata
	o(0x14000000)
	rel = ld.Addrel(initfunc)
	rel.Off = 8
	rel.Siz = 4
	rel.Sym = ld.Linklookup(ld.Ctxt, "runtime.addmoduledata", 0)
	rel.Type = obj.R_CALLARM64 // Really should be R_AARCH64_JUMP26 but doesn't seem to make any difference

	if ld.Ctxt.Etextp != nil {
		ld.Ctxt.Etextp.Next = initfunc
	} else {
		ld.Ctxt.Textp = initfunc
	}
	ld.Ctxt.Etextp = initfunc
	initarray_entry := ld.Linklookup(ld.Ctxt, "go.link.addmoduledatainit", 0)
	initarray_entry.Reachable = true
	initarray_entry.Local = true
	initarray_entry.Type = obj.SINITARR
	ld.Addaddr(ld.Ctxt, initarray_entry, initfunc)
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:52，代碼來源:asm.go

示例4: addgotsym

func addgotsym(ctxt *ld.Link, s *ld.LSym) {
	if s.Got >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)
	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)
	ld.Adduint32(ctxt, got, 0)

	if ld.Iself {
		rel := ld.Linklookup(ctxt, ".rel", 0)
		ld.Addaddrplus(ctxt, rel, got, int64(s.Got))
		ld.Adduint32(ctxt, rel, ld.ELF32_R_INFO(uint32(s.Dynid), ld.R_ARM_GLOB_DAT))
	} else {
		ld.Diag("addgotsym: unsupported binary format")
	}
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:18，代碼來源:asm.go

示例5: addpltsym

func addpltsym(ctxt *ld.Link, s *ld.LSym) {
	if s.Plt >= 0 {
		return
	}

	ld.Adddynsym(ctxt, s)

	if ld.Iself {
		plt := ld.Linklookup(ctxt, ".plt", 0)
		rela := ld.Linklookup(ctxt, ".rela.plt", 0)
		if plt.Size == 0 {
			elfsetupplt()
		}

		// Create the glink resolver if necessary
		glink := ensureglinkresolver()

		// Write symbol resolver stub (just a branch to the
		// glink resolver stub)
		r := ld.Addrel(glink)

		r.Sym = glink
		r.Off = int32(glink.Size)
		r.Siz = 4
		r.Type = obj.R_CALLPOWER
		ld.Adduint32(ctxt, glink, 0x48000000) // b .glink

		// In the ppc64 ABI, the dynamic linker is responsible
		// for writing the entire PLT.  We just need to
		// reserve 8 bytes for each PLT entry and generate a
		// JMP_SLOT dynamic relocation for it.
		//
		// TODO(austin): ABI v1 is different
		s.Plt = int32(plt.Size)

		plt.Size += 8

		ld.Addaddrplus(ctxt, rela, plt, int64(s.Plt))
		ld.Adduint64(ctxt, rela, ld.ELF64_R_INFO(uint32(s.Dynid), ld.R_PPC64_JMP_SLOT))
		ld.Adduint64(ctxt, rela, 0)
	} else {
		ld.Diag("addpltsym: unsupported binary format")
	}
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:44，代碼來源:asm.go

示例6: addgotsyminternal

func addgotsyminternal(ctxt *ld.Link, s *ld.LSym) {
	if s.Got >= 0 {
		return
	}

	got := ld.Linklookup(ctxt, ".got", 0)
	s.Got = int32(got.Size)

	ld.Addaddrplus(ctxt, got, s, 0)

	if ld.Iself {
	} else {
		ld.Diag("addgotsyminternal: unsupported binary format")
	}
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:15，代碼來源:asm.go

示例7: archreloc

func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		return -1
	}
	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
		return 0
	}

	return -1
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:16，代碼來源:asm.go

示例8: gencallstub

// Construct a call stub in stub that calls symbol targ via its PLT
// entry.
func gencallstub(abicase int, stub *ld.LSym, targ *ld.LSym) {
	if abicase != 1 {
		// If we see R_PPC64_TOCSAVE or R_PPC64_REL24_NOTOC
		// relocations, we'll need to implement cases 2 and 3.
		log.Fatalf("gencallstub only implements case 1 calls")
	}

	plt := ld.Linklookup(ld.Ctxt, ".plt", 0)

	stub.Type = obj.STEXT

	// Save TOC pointer in TOC save slot
	ld.Adduint32(ld.Ctxt, stub, 0xf8410018) // std r2,24(r1)

	// Load the function pointer from the PLT.
	r := ld.Addrel(stub)

	r.Off = int32(stub.Size)
	r.Sym = plt
	r.Add = int64(targ.Plt)
	r.Siz = 2
	if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
		r.Off += int32(r.Siz)
	}
	r.Type = obj.R_POWER_TOC
	r.Variant = ld.RV_POWER_HA
	ld.Adduint32(ld.Ctxt, stub, 0x3d820000) // addis r12,r2,[email protected]@[email protected]
	r = ld.Addrel(stub)
	r.Off = int32(stub.Size)
	r.Sym = plt
	r.Add = int64(targ.Plt)
	r.Siz = 2
	if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
		r.Off += int32(r.Siz)
	}
	r.Type = obj.R_POWER_TOC
	r.Variant = ld.RV_POWER_LO
	ld.Adduint32(ld.Ctxt, stub, 0xe98c0000) // ld r12,[email protected]@[email protected](r12)

	// Jump to the loaded pointer
	ld.Adduint32(ld.Ctxt, stub, 0x7d8903a6) // mtctr r12
	ld.Adduint32(ld.Ctxt, stub, 0x4e800420) // bctr
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:45，代碼來源:asm.go

示例9: adddynrel

func adddynrel(s *ld.LSym, r *ld.Reloc) {
	targ := r.Sym
	ld.Ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ld.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_X86_64_PC32:
		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ld.Diag("unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += 4
		return

	case 256 + ld.R_X86_64_PLT32:
		r.Type = obj.R_PCREL
		r.Add += 4
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(targ)
			r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}

		return

	case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
				// turn MOVQ of GOT entry into LEAQ of symbol itself
				s.P[r.Off-2] = 0x8d

				r.Type = obj.R_PCREL
				r.Add += 4
				return
			}
		}

		// fall back to using GOT and hope for the best (CMOV*)
		// TODO: just needs relocation, no need to put in .dynsym
		addgotsym(targ)

		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
		r.Add += 4
		r.Add += int64(targ.Got)
		return

	case 256 + ld.R_X86_64_64:
		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

	// Handle relocations found in Mach-O object files.
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
		// TODO: What is the difference between all these?
		r.Type = obj.R_ADDR

		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(targ)
			r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
			r.Add = int64(targ.Plt)
			r.Type = obj.R_PCREL
			return
		}
		fallthrough

		// fall through
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
		r.Type = obj.R_PCREL

		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
//.........這裏部分代碼省略.........
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:101，代碼來源:asm.go

示例10: asmb


//.........這裏部分代碼省略.........
		default:
			if ld.Iself {
				symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
				symo = uint32(ld.Rnd(int64(symo), int64(ld.INITRND)))
			}

		case obj.Hplan9:
			symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)

		case obj.Hdarwin:
			symo = uint32(ld.Segdwarf.Fileoff + uint64(ld.Rnd(int64(ld.Segdwarf.Filelen), int64(ld.INITRND))) + uint64(machlink))

		case obj.Hwindows:
			symo = uint32(ld.Segdata.Fileoff + ld.Segdata.Filelen)
			symo = uint32(ld.Rnd(int64(symo), ld.PEFILEALIGN))
		}

		ld.Cseek(int64(symo))
		switch ld.HEADTYPE {
		default:
			if ld.Iself {
				if ld.Debug['v'] != 0 {
					fmt.Fprintf(&ld.Bso, "%5.2f elfsym\n", obj.Cputime())
				}
				ld.Asmelfsym()
				ld.Cflush()
				ld.Cwrite(ld.Elfstrdat)

				if ld.Debug['v'] != 0 {
					fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
				}
				ld.Dwarfemitdebugsections()

				if ld.Linkmode == ld.LinkExternal {
					ld.Elfemitreloc()
				}
			}

		case obj.Hplan9:
			ld.Asmplan9sym()
			ld.Cflush()

			sym := ld.Linklookup(ld.Ctxt, "pclntab", 0)
			if sym != nil {
				ld.Lcsize = int32(len(sym.P))
				for i := 0; int32(i) < ld.Lcsize; i++ {
					ld.Cput(uint8(sym.P[i]))
				}

				ld.Cflush()
			}

		case obj.Hwindows:
			if ld.Debug['v'] != 0 {
				fmt.Fprintf(&ld.Bso, "%5.2f dwarf\n", obj.Cputime())
			}
			ld.Dwarfemitdebugsections()

		case obj.Hdarwin:
			if ld.Linkmode == ld.LinkExternal {
				ld.Machoemitreloc()
			}
		}
	}

	if ld.Debug['v'] != 0 {
		fmt.Fprintf(&ld.Bso, "%5.2f headr\n", obj.Cputime())
	}
	ld.Bso.Flush()
	ld.Cseek(0)
	switch ld.HEADTYPE {
	default:
	case obj.Hplan9: /* plan9 */
		magic := int32(4*11*11 + 7)

		ld.Lputb(uint32(magic))              /* magic */
		ld.Lputb(uint32(ld.Segtext.Filelen)) /* sizes */
		ld.Lputb(uint32(ld.Segdata.Filelen))
		ld.Lputb(uint32(ld.Segdata.Length - ld.Segdata.Filelen))
		ld.Lputb(uint32(ld.Symsize))      /* nsyms */
		ld.Lputb(uint32(ld.Entryvalue())) /* va of entry */
		ld.Lputb(uint32(ld.Spsize))       /* sp offsets */
		ld.Lputb(uint32(ld.Lcsize))       /* line offsets */

	case obj.Hdarwin:
		ld.Asmbmacho()

	case obj.Hlinux,
		obj.Hfreebsd,
		obj.Hnetbsd,
		obj.Hopenbsd,
		obj.Hnacl:
		ld.Asmbelf(int64(symo))

	case obj.Hwindows:
		ld.Asmbpe()
	}

	ld.Cflush()
}
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:101，代碼來源:asm.go

示例11: archinit

func archinit() {
	// getgoextlinkenabled is based on GO_EXTLINK_ENABLED when
	// Go was built; see ../../make.bash.
	if ld.Linkmode == ld.LinkAuto && obj.Getgoextlinkenabled() == "0" {
		ld.Linkmode = ld.LinkInternal
	}

	if ld.Buildmode == ld.BuildmodeCShared || ld.Buildmode == ld.BuildmodePIE || ld.DynlinkingGo() {
		ld.Linkmode = ld.LinkExternal
		got := ld.Linklookup(ld.Ctxt, "_GLOBAL_OFFSET_TABLE_", 0)
		got.Type = obj.SDYNIMPORT
		got.Reachable = true
	}

	switch ld.HEADTYPE {
	default:
		if ld.Linkmode == ld.LinkAuto {
			ld.Linkmode = ld.LinkInternal
		}
		if ld.Linkmode == ld.LinkExternal && obj.Getgoextlinkenabled() != "1" {
			log.Fatalf("cannot use -linkmode=external with -H %s", ld.Headstr(int(ld.HEADTYPE)))
		}

	case obj.Hdarwin,
		obj.Hfreebsd,
		obj.Hlinux,
		obj.Hnetbsd,
		obj.Hopenbsd,
		obj.Hwindows:
		break
	}

	switch ld.HEADTYPE {
	default:
		ld.Exitf("unknown -H option: %v", ld.HEADTYPE)

	case obj.Hplan9: /* plan 9 */
		ld.HEADR = 32

		if ld.INITTEXT == -1 {
			ld.INITTEXT = 4096 + 32
		}
		if ld.INITDAT == -1 {
			ld.INITDAT = 0
		}
		if ld.INITRND == -1 {
			ld.INITRND = 4096
		}

	case obj.Hdarwin: /* apple MACH */
		ld.Machoinit()

		ld.HEADR = ld.INITIAL_MACHO_HEADR
		if ld.INITTEXT == -1 {
			ld.INITTEXT = 4096 + int64(ld.HEADR)
		}
		if ld.INITDAT == -1 {
			ld.INITDAT = 0
		}
		if ld.INITRND == -1 {
			ld.INITRND = 4096
		}

	case obj.Hlinux, /* elf32 executable */
		obj.Hfreebsd,
		obj.Hnetbsd,
		obj.Hopenbsd:
		ld.Elfinit()

		ld.HEADR = ld.ELFRESERVE
		if ld.INITTEXT == -1 {
			ld.INITTEXT = 0x08048000 + int64(ld.HEADR)
		}
		if ld.INITDAT == -1 {
			ld.INITDAT = 0
		}
		if ld.INITRND == -1 {
			ld.INITRND = 4096
		}

	case obj.Hnacl:
		ld.Elfinit()
		ld.HEADR = 0x10000
		ld.Funcalign = 32
		if ld.INITTEXT == -1 {
			ld.INITTEXT = 0x20000
		}
		if ld.INITDAT == -1 {
			ld.INITDAT = 0
		}
		if ld.INITRND == -1 {
			ld.INITRND = 0x10000
		}

	case obj.Hwindows: /* PE executable */
		ld.Peinit()

		ld.HEADR = ld.PEFILEHEADR
		if ld.INITTEXT == -1 {
			ld.INITTEXT = ld.PEBASE + int64(ld.PESECTHEADR)
//.........這裏部分代碼省略.........
開發者ID:ckeyer，項目名稱:gosrc，代碼行數:101，代碼來源:obj.go


注：本文中的bootstrap/link/internal/ld.Linklookup函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。