Golang gc.Cgen函數代碼示例

/*
 * generate byte multiply:
 *	res = nl * nr
 * there is no 2-operand byte multiply instruction so
 * we do a full-width multiplication and truncate afterwards.
 */
func cgen_bmul(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) bool {
	if optoas(op, nl.Type) != x86.AIMULB {
		return false
	}

	// copy from byte to full registers
	t := gc.Types[gc.TUINT32]

	if gc.Issigned[nl.Type.Etype] {
		t = gc.Types[gc.TINT32]
	}

	// largest ullman on left.
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	var nt gc.Node
	gc.Tempname(&nt, nl.Type)
	gc.Cgen(nl, &nt)
	var n1 gc.Node
	gc.Regalloc(&n1, t, res)
	gc.Cgen(nr, &n1)
	var n2 gc.Node
	gc.Regalloc(&n2, t, nil)
	gmove(&nt, &n2)
	a := optoas(op, t)
	gins(a, &n2, &n1)
	gc.Regfree(&n2)
	gmove(&n1, res)
	gc.Regfree(&n1)

	return true
}

/*
 * generate an addressable node in res, containing the value of n.
 * n is an array index, and might be any size; res width is <= 32-bit.
 * returns Prog* to patch to panic call.
 */
func igenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	if !gc.Is64(n.Type) {
		if n.Addable && (gc.Simtype[n.Etype] == gc.TUINT32 || gc.Simtype[n.Etype] == gc.TINT32) {
			// nothing to do.
			*res = *n
		} else {
			gc.Tempname(res, gc.Types[gc.TUINT32])
			gc.Cgen(n, res)
		}

		return nil
	}

	var tmp gc.Node
	gc.Tempname(&tmp, gc.Types[gc.TINT64])
	gc.Cgen(n, &tmp)
	var lo gc.Node
	var hi gc.Node
	split64(&tmp, &lo, &hi)
	gc.Tempname(res, gc.Types[gc.TUINT32])
	gmove(&lo, res)
	if bounded {
		splitclean()
		return nil
	}

	var zero gc.Node
	gc.Nodconst(&zero, gc.Types[gc.TINT32], 0)
	gins(x86.ACMPL, &hi, &zero)
	splitclean()
	return gc.Gbranch(x86.AJNE, nil, +1)
}

func ginscmp(op gc.Op, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if gc.Isint[t.Etype] && n1.Op == gc.OLITERAL && n2.Op != gc.OLITERAL {
		// Reverse comparison to place constant last.
		op = gc.Brrev(op)
		n1, n2 = n2, n1
	}

	var r1, r2, g1, g2 gc.Node
	gc.Regalloc(&r1, t, n1)
	gc.Regalloc(&g1, n1.Type, &r1)
	gc.Cgen(n1, &g1)
	gmove(&g1, &r1)
	if gc.Isint[t.Etype] && gc.Isconst(n2, gc.CTINT) {
		ginscon2(optoas(gc.OCMP, t), &r1, n2.Int())
	} else {
		gc.Regalloc(&r2, t, n2)
		gc.Regalloc(&g2, n1.Type, &r2)
		gc.Cgen(n2, &g2)
		gmove(&g2, &r2)
		rawgins(optoas(gc.OCMP, t), &r1, &r2)
		gc.Regfree(&g2)
		gc.Regfree(&r2)
	}
	gc.Regfree(&g1)
	gc.Regfree(&r1)
	return gc.Gbranch(optoas(op, t), nil, likely)
}

/*
 * generate array index into res.
 * n might be any size; res is 32-bit.
 * returns Prog* to patch to panic call.
 */
func cgenindex(n *gc.Node, res *gc.Node, bounded bool) *obj.Prog {
	if !gc.Is64(n.Type) {
		gc.Cgen(n, res)
		return nil
	}

	var tmp gc.Node
	gc.Tempname(&tmp, gc.Types[gc.TINT64])
	gc.Cgen(n, &tmp)
	var lo gc.Node
	var hi gc.Node
	split64(&tmp, &lo, &hi)
	gmove(&lo, res)
	if bounded {
		splitclean()
		return nil
	}

	var n1 gc.Node
	gc.Regalloc(&n1, gc.Types[gc.TINT32], nil)
	var n2 gc.Node
	gc.Regalloc(&n2, gc.Types[gc.TINT32], nil)
	var zero gc.Node
	gc.Nodconst(&zero, gc.Types[gc.TINT32], 0)
	gmove(&hi, &n1)
	gmove(&zero, &n2)
	gins(arm.ACMP, &n1, &n2)
	gc.Regfree(&n2)
	gc.Regfree(&n1)
	splitclean()
	return gc.Gbranch(arm.ABNE, nil, -1)
}

func ginscmp(op gc.Op, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if gc.Isint[t.Etype] && n1.Op == gc.OLITERAL && n1.Int() == 0 && n2.Op != gc.OLITERAL {
		op = gc.Brrev(op)
		n1, n2 = n2, n1
	}
	var r1, r2, g1, g2 gc.Node
	gc.Regalloc(&r1, t, n1)
	gc.Regalloc(&g1, n1.Type, &r1)
	gc.Cgen(n1, &g1)
	gmove(&g1, &r1)
	if gc.Isint[t.Etype] && n2.Op == gc.OLITERAL && n2.Int() == 0 {
		gins(arm.ACMP, &r1, n2)
	} else {
		gc.Regalloc(&r2, t, n2)
		gc.Regalloc(&g2, n1.Type, &r2)
		gc.Cgen(n2, &g2)
		gmove(&g2, &r2)
		gins(optoas(gc.OCMP, t), &r1, &r2)
		gc.Regfree(&g2)
		gc.Regfree(&r2)
	}
	gc.Regfree(&g1)
	gc.Regfree(&r1)
	return gc.Gbranch(optoas(op, t), nil, likely)
}

/*
 * generate division.
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op gc.Op, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	t := nl.Type

	t0 := t

	if t.Width < 8 {
		if gc.Issigned[t.Etype] {
			t = gc.Types[gc.TINT64]
		} else {
			t = gc.Types[gc.TUINT64]
		}
	}

	a := optoas(gc.ODIV, t)

	var tl gc.Node
	gc.Regalloc(&tl, t0, nil)
	var tr gc.Node
	gc.Regalloc(&tr, t0, nil)
	if nl.Ullman >= nr.Ullman {
		gc.Cgen(nl, &tl)
		gc.Cgen(nr, &tr)
	} else {
		gc.Cgen(nr, &tr)
		gc.Cgen(nl, &tl)
	}

	if t != t0 {
		// Convert
		tl2 := tl

		tr2 := tr
		tl.Type = t
		tr.Type = t
		gmove(&tl2, &tl)
		gmove(&tr2, &tr)
	}

	// Handle divide-by-zero panic.
	p1 := ginsbranch(mips.ABNE, nil, &tr, nil, 0)
	if panicdiv == nil {
		panicdiv = gc.Sysfunc("panicdivide")
	}
	gc.Ginscall(panicdiv, -1)
	gc.Patch(p1, gc.Pc)

	gins3(a, &tr, &tl, nil)
	gc.Regfree(&tr)
	if op == gc.ODIV {
		var lo gc.Node
		gc.Nodreg(&lo, gc.Types[gc.TUINT64], mips.REG_LO)
		gins(mips.AMOVV, &lo, &tl)
	} else { // remainder in REG_HI
		var hi gc.Node
		gc.Nodreg(&hi, gc.Types[gc.TUINT64], mips.REG_HI)
		gins(mips.AMOVV, &hi, &tl)
	}
	gmove(&tl, res)
	gc.Regfree(&tl)
}

/*
 * generate high multiply
 *  res = (nl * nr) >> wordsize
 */
func cgen_hmul(nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if nl.Ullman < nr.Ullman {
		nl, nr = nr, nl
	}

	t := nl.Type
	w := int(t.Width * 8)
	var n1 gc.Node
	gc.Regalloc(&n1, t, res)
	gc.Cgen(nl, &n1)
	var n2 gc.Node
	gc.Regalloc(&n2, t, nil)
	gc.Cgen(nr, &n2)
	switch gc.Simtype[t.Etype] {
	case gc.TINT8,
		gc.TINT16:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(w), &n1)

	case gc.TUINT8,
		gc.TUINT16:
		gins(optoas(gc.OMUL, t), &n2, &n1)
		gshift(arm.AMOVW, &n1, arm.SHIFT_LR, int32(w), &n1)

		// perform a long multiplication.
	case gc.TINT32,
		gc.TUINT32:
		var p *obj.Prog
		if gc.Issigned[t.Etype] {
			p = gins(arm.AMULL, &n2, nil)
		} else {
			p = gins(arm.AMULLU, &n2, nil)
		}

		// n2 * n1 -> (n1 n2)
		p.Reg = n1.Reg

		p.To.Type = obj.TYPE_REGREG
		p.To.Reg = n1.Reg
		p.To.Offset = int64(n2.Reg)

	default:
		gc.Fatalf("cgen_hmul %v", t)
	}

	gc.Cgen(&n1, res)
	gc.Regfree(&n1)
	gc.Regfree(&n2)
}

/*
 * n is a 64-bit value.  fill in lo and hi to refer to its 32-bit halves.
 */
func split64(n *gc.Node, lo *gc.Node, hi *gc.Node) {
	if !gc.Is64(n.Type) {
		gc.Fatalf("split64 %v", n.Type)
	}

	if nsclean >= len(sclean) {
		gc.Fatalf("split64 clean")
	}
	sclean[nsclean].Op = gc.OEMPTY
	nsclean++
	switch n.Op {
	default:
		switch n.Op {
		default:
			var n1 gc.Node
			if !dotaddable(n, &n1) {
				gc.Igen(n, &n1, nil)
				sclean[nsclean-1] = n1
			}

			n = &n1

		case gc.ONAME:
			if n.Class == gc.PPARAMREF {
				var n1 gc.Node
				gc.Cgen(n.Name.Heapaddr, &n1)
				sclean[nsclean-1] = n1
				n = &n1
			}

			// nothing
		case gc.OINDREG:
			break
		}

		*lo = *n
		*hi = *n
		lo.Type = gc.Types[gc.TUINT32]
		if n.Type.Etype == gc.TINT64 {
			hi.Type = gc.Types[gc.TINT32]
		} else {
			hi.Type = gc.Types[gc.TUINT32]
		}
		hi.Xoffset += 4

	case gc.OLITERAL:
		var n1 gc.Node
		n.Convconst(&n1, n.Type)
		i := n1.Int()
		gc.Nodconst(lo, gc.Types[gc.TUINT32], int64(uint32(i)))
		i >>= 32
		if n.Type.Etype == gc.TINT64 {
			gc.Nodconst(hi, gc.Types[gc.TINT32], int64(int32(i)))
		} else {
			gc.Nodconst(hi, gc.Types[gc.TUINT32], int64(uint32(i)))
		}
	}
}

/*
 * generate floating-point operation.
 */
func cgen_float(n *gc.Node, res *gc.Node) {
	nl := n.Left
	switch n.Op {
	case gc.OEQ,
		gc.ONE,
		gc.OLT,
		gc.OLE,
		gc.OGE:
		p1 := gc.Gbranch(obj.AJMP, nil, 0)
		p2 := gc.Pc
		gmove(gc.Nodbool(true), res)
		p3 := gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)
		gc.Bgen(n, true, 0, p2)
		gmove(gc.Nodbool(false), res)
		gc.Patch(p3, gc.Pc)
		return

	case gc.OPLUS:
		gc.Cgen(nl, res)
		return

	case gc.OCONV:
		if gc.Eqtype(n.Type, nl.Type) || gc.Noconv(n.Type, nl.Type) {
			gc.Cgen(nl, res)
			return
		}

		var n2 gc.Node
		gc.Tempname(&n2, n.Type)
		var n1 gc.Node
		gc.Mgen(nl, &n1, res)
		gmove(&n1, &n2)
		gmove(&n2, res)
		gc.Mfree(&n1)
		return
	}

	if gc.Thearch.Use387 {
		cgen_float387(n, res)
	} else {
		cgen_floatsse(n, res)
	}
}

// floating-point.  387 (not SSE2)
func cgen_float387(n *gc.Node, res *gc.Node) {
	var f0 gc.Node
	var f1 gc.Node

	nl := n.Left
	nr := n.Right
	gc.Nodreg(&f0, nl.Type, x86.REG_F0)
	gc.Nodreg(&f1, n.Type, x86.REG_F0+1)
	if nr != nil {
		// binary
		if nl.Ullman >= nr.Ullman {
			gc.Cgen(nl, &f0)
			if nr.Addable {
				gins(foptoas(n.Op, n.Type, 0), nr, &f0)
			} else {
				gc.Cgen(nr, &f0)
				gins(foptoas(n.Op, n.Type, Fpop), &f0, &f1)
			}
		} else {
			gc.Cgen(nr, &f0)
			if nl.Addable {
				gins(foptoas(n.Op, n.Type, Frev), nl, &f0)
			} else {
				gc.Cgen(nl, &f0)
				gins(foptoas(n.Op, n.Type, Frev|Fpop), &f0, &f1)
			}
		}

		gmove(&f0, res)
		return
	}

	// unary
	gc.Cgen(nl, &f0)

	if n.Op != gc.OCONV && n.Op != gc.OPLUS {
		gins(foptoas(n.Op, n.Type, 0), nil, nil)
	}
	gmove(&f0, res)
	return
}

func bgen_float(n *gc.Node, wantTrue bool, likely int, to *obj.Prog) {
	nl := n.Left
	nr := n.Right
	op := n.Op
	if !wantTrue {
		// brcom is not valid on floats when NaN is involved.
		p1 := gc.Gbranch(obj.AJMP, nil, 0)
		p2 := gc.Gbranch(obj.AJMP, nil, 0)
		gc.Patch(p1, gc.Pc)

		// No need to avoid re-genning ninit.
		bgen_float(n, true, -likely, p2)

		gc.Patch(gc.Gbranch(obj.AJMP, nil, 0), to)
		gc.Patch(p2, gc.Pc)
		return
	}

	if gc.Thearch.Use387 {
		op = gc.Brrev(op) // because the args are stacked
		if op == gc.OGE || op == gc.OGT {
			// only < and <= work right with NaN; reverse if needed
			nl, nr = nr, nl
			op = gc.Brrev(op)
		}

		var ax, n2, tmp gc.Node
		gc.Nodreg(&tmp, nr.Type, x86.REG_F0)
		gc.Nodreg(&n2, nr.Type, x86.REG_F0+1)
		gc.Nodreg(&ax, gc.Types[gc.TUINT16], x86.REG_AX)
		if gc.Simsimtype(nr.Type) == gc.TFLOAT64 {
			if nl.Ullman > nr.Ullman {
				gc.Cgen(nl, &tmp)
				gc.Cgen(nr, &tmp)
				gins(x86.AFXCHD, &tmp, &n2)
			} else {
				gc.Cgen(nr, &tmp)
				gc.Cgen(nl, &tmp)
			}
			gins(x86.AFUCOMPP, &tmp, &n2)
		} else {
			// TODO(rsc): The moves back and forth to memory
			// here are for truncating the value to 32 bits.
			// This handles 32-bit comparison but presumably
			// all the other ops have the same problem.
			// We need to figure out what the right general
			// solution is, besides telling people to use float64.
			var t1 gc.Node
			gc.Tempname(&t1, gc.Types[gc.TFLOAT32])

			var t2 gc.Node
			gc.Tempname(&t2, gc.Types[gc.TFLOAT32])
			gc.Cgen(nr, &t1)
			gc.Cgen(nl, &t2)
			gmove(&t2, &tmp)
			gins(x86.AFCOMFP, &t1, &tmp)
		}
		gins(x86.AFSTSW, nil, &ax)
		gins(x86.ASAHF, nil, nil)
	} else {
		// Not 387
		if !nl.Addable {
			nl = gc.CgenTemp(nl)
		}
		if !nr.Addable {
			nr = gc.CgenTemp(nr)
		}

		var n2 gc.Node
		gc.Regalloc(&n2, nr.Type, nil)
		gmove(nr, &n2)
		nr = &n2

		if nl.Op != gc.OREGISTER {
			var n3 gc.Node
			gc.Regalloc(&n3, nl.Type, nil)
			gmove(nl, &n3)
			nl = &n3
		}

		if op == gc.OGE || op == gc.OGT {
			// only < and <= work right with NopN; reverse if needed
			nl, nr = nr, nl
			op = gc.Brrev(op)
		}

		gins(foptoas(gc.OCMP, nr.Type, 0), nl, nr)
		if nl.Op == gc.OREGISTER {
			gc.Regfree(nl)
		}
		gc.Regfree(nr)
	}

	switch op {
	case gc.OEQ:
		// neither NE nor P
		p1 := gc.Gbranch(x86.AJNE, nil, -likely)
		p2 := gc.Gbranch(x86.AJPS, nil, -likely)
		gc.Patch(gc.Gbranch(obj.AJMP, nil, 0), to)
		gc.Patch(p1, gc.Pc)
//.........這裏部分代碼省略.........

func cgen_floatsse(n *gc.Node, res *gc.Node) {
	var a int

	nl := n.Left
	nr := n.Right
	switch n.Op {
	default:
		gc.Dump("cgen_floatsse", n)
		gc.Fatalf("cgen_floatsse %v", gc.Oconv(int(n.Op), 0))
		return

	case gc.OMINUS,
		gc.OCOM:
		nr = gc.Nodintconst(-1)
		gc.Convlit(&nr, n.Type)
		a = foptoas(gc.OMUL, nl.Type, 0)
		goto sbop

		// symmetric binary
	case gc.OADD,
		gc.OMUL:
		a = foptoas(n.Op, nl.Type, 0)

		goto sbop

		// asymmetric binary
	case gc.OSUB,
		gc.OMOD,
		gc.ODIV:
		a = foptoas(n.Op, nl.Type, 0)

		goto abop
	}

sbop: // symmetric binary
	if nl.Ullman < nr.Ullman || nl.Op == gc.OLITERAL {
		nl, nr = nr, nl
	}

abop: // asymmetric binary
	if nl.Ullman >= nr.Ullman {
		var nt gc.Node
		gc.Tempname(&nt, nl.Type)
		gc.Cgen(nl, &nt)
		var n2 gc.Node
		gc.Mgen(nr, &n2, nil)
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gmove(&nt, &n1)
		gins(a, &n2, &n1)
		gmove(&n1, res)
		gc.Regfree(&n1)
		gc.Mfree(&n2)
	} else {
		var n2 gc.Node
		gc.Regalloc(&n2, nr.Type, res)
		gc.Cgen(nr, &n2)
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, nil)
		gc.Cgen(nl, &n1)
		gins(a, &n2, &n1)
		gc.Regfree(&n2)
		gmove(&n1, res)
		gc.Regfree(&n1)
	}

	return
}

/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op gc.Op, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if nl.Type.Width > 4 {
		gc.Fatalf("cgen_shift %v", nl.Type)
	}

	w := int(nl.Type.Width * 8)

	if op == gc.OLROT {
		v := nr.Int()
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		if w == 32 {
			gc.Cgen(nl, &n1)
			gshift(arm.AMOVW, &n1, arm.SHIFT_RR, int32(w)-int32(v), &n1)
		} else {
			var n2 gc.Node
			gc.Regalloc(&n2, nl.Type, nil)
			gc.Cgen(nl, &n2)
			gshift(arm.AMOVW, &n2, arm.SHIFT_LL, int32(v), &n1)
			gshift(arm.AORR, &n2, arm.SHIFT_LR, int32(w)-int32(v), &n1)
			gc.Regfree(&n2)

			// Ensure sign/zero-extended result.
			gins(optoas(gc.OAS, nl.Type), &n1, &n1)
		}

		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(nr.Int())
		if sc == 0 {
		} else // nothing to do
		if sc >= uint64(nl.Type.Width*8) {
			if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
				gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(w), &n1)
			} else {
				gins(arm.AEOR, &n1, &n1)
			}
		} else {
			if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
				gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(sc), &n1)
			} else if op == gc.ORSH {
				gshift(arm.AMOVW, &n1, arm.SHIFT_LR, int32(sc), &n1) // OLSH
			} else {
				gshift(arm.AMOVW, &n1, arm.SHIFT_LL, int32(sc), &n1)
			}
		}

		if w < 32 && op == gc.OLSH {
			gins(optoas(gc.OAS, nl.Type), &n1, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	tr := nr.Type
	var t gc.Node
	var n1 gc.Node
	var n2 gc.Node
	var n3 gc.Node
	if tr.Width > 4 {
		var nt gc.Node
		gc.Tempname(&nt, nr.Type)
		if nl.Ullman >= nr.Ullman {
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
			gc.Cgen(nr, &nt)
			n1 = nt
		} else {
			gc.Cgen(nr, &nt)
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
		}

		var hi gc.Node
		var lo gc.Node
		split64(&nt, &lo, &hi)
		gc.Regalloc(&n1, gc.Types[gc.TUINT32], nil)
		gc.Regalloc(&n3, gc.Types[gc.TUINT32], nil)
		gmove(&lo, &n1)
		gmove(&hi, &n3)
		splitclean()
		gins(arm.ATST, &n3, nil)
		gc.Nodconst(&t, gc.Types[gc.TUINT32], int64(w))
		p1 := gins(arm.AMOVW, &t, &n1)
		p1.Scond = arm.C_SCOND_NE
		tr = gc.Types[gc.TUINT32]
		gc.Regfree(&n3)
//.........這裏部分代碼省略.........

/*
 * attempt to generate 64-bit
 *	res = n
 * return 1 on success, 0 if op not handled.
 */
func cgen64(n *gc.Node, res *gc.Node) {
	if res.Op != gc.OINDREG && res.Op != gc.ONAME {
		gc.Dump("n", n)
		gc.Dump("res", res)
		gc.Fatalf("cgen64 %v of %v", gc.Oconv(int(n.Op), 0), gc.Oconv(int(res.Op), 0))
	}

	l := n.Left
	var t1 gc.Node
	if !l.Addable {
		gc.Tempname(&t1, l.Type)
		gc.Cgen(l, &t1)
		l = &t1
	}

	var hi1 gc.Node
	var lo1 gc.Node
	split64(l, &lo1, &hi1)
	switch n.Op {
	default:
		gc.Fatalf("cgen64 %v", gc.Oconv(int(n.Op), 0))

	case gc.OMINUS:
		var lo2 gc.Node
		var hi2 gc.Node
		split64(res, &lo2, &hi2)

		gc.Regalloc(&t1, lo1.Type, nil)
		var al gc.Node
		gc.Regalloc(&al, lo1.Type, nil)
		var ah gc.Node
		gc.Regalloc(&ah, hi1.Type, nil)

		gins(arm.AMOVW, &lo1, &al)
		gins(arm.AMOVW, &hi1, &ah)

		gmove(ncon(0), &t1)
		p1 := gins(arm.ASUB, &al, &t1)
		p1.Scond |= arm.C_SBIT
		gins(arm.AMOVW, &t1, &lo2)

		gmove(ncon(0), &t1)
		gins(arm.ASBC, &ah, &t1)
		gins(arm.AMOVW, &t1, &hi2)

		gc.Regfree(&t1)
		gc.Regfree(&al)
		gc.Regfree(&ah)
		splitclean()
		splitclean()
		return

	case gc.OCOM:
		gc.Regalloc(&t1, lo1.Type, nil)
		gmove(ncon(^uint32(0)), &t1)

		var lo2 gc.Node
		var hi2 gc.Node
		split64(res, &lo2, &hi2)
		var n1 gc.Node
		gc.Regalloc(&n1, lo1.Type, nil)

		gins(arm.AMOVW, &lo1, &n1)
		gins(arm.AEOR, &t1, &n1)
		gins(arm.AMOVW, &n1, &lo2)

		gins(arm.AMOVW, &hi1, &n1)
		gins(arm.AEOR, &t1, &n1)
		gins(arm.AMOVW, &n1, &hi2)

		gc.Regfree(&t1)
		gc.Regfree(&n1)
		splitclean()
		splitclean()
		return

		// binary operators.
	// common setup below.
	case gc.OADD,
		gc.OSUB,
		gc.OMUL,
		gc.OLSH,
		gc.ORSH,
		gc.OAND,
		gc.OOR,
		gc.OXOR,
		gc.OLROT:
		break
	}

	// setup for binary operators
	r := n.Right

	if r != nil && !r.Addable {
		var t2 gc.Node
//.........這裏部分代碼省略.........

//.........這裏部分代碼省略.........
			x86.AADDW,
			x86.AADDL,
			x86.AADDQ,
			x86.ASUBB,
			x86.ASUBW,
			x86.ASUBL,
			x86.ASUBQ,
			x86.AANDB,
			x86.AANDW,
			x86.AANDL,
			x86.AANDQ,
			x86.AORB,
			x86.AORW,
			x86.AORL,
			x86.AORQ,
			x86.AXORB,
			x86.AXORW,
			x86.AXORL,
			x86.AXORQ,
			x86.AINCB,
			x86.AINCW,
			x86.AINCL,
			x86.AINCQ,
			x86.ADECB,
			x86.ADECW,
			x86.ADECL,
			x86.ADECQ,
			x86.AMOVB,
			x86.AMOVW,
			x86.AMOVL,
			x86.AMOVQ:
			break
		}

		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		gc.Naddr(a, n)
		return true

	case gc.ODOT,
		gc.ODOTPTR:
		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		var nn *gc.Node
		var oary [10]int64
		o := gc.Dotoffset(n, oary[:], &nn)
		if nn == nil {
			sudoclean()
			return false
		}

		if nn.Addable && o == 1 && oary[0] >= 0 {
			// directly addressable set of DOTs
			n1 := *nn

			n1.Type = n.Type
			n1.Xoffset += oary[0]
			gc.Naddr(a, &n1)
			return true
		}

		gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
		n1 := *reg
		n1.Op = gc.OINDREG
		if oary[0] >= 0 {
			gc.Agen(nn, reg)
			n1.Xoffset = oary[0]
		} else {
			gc.Cgen(nn, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[0] + 1)
		}

		for i := 1; i < o; i++ {
			if oary[i] >= 0 {
				gc.Fatalf("can't happen")
			}
			gins(movptr, &n1, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[i] + 1)
		}

		a.Type = obj.TYPE_NONE
		a.Index = obj.TYPE_NONE
		gc.Fixlargeoffset(&n1)
		gc.Naddr(a, &n1)
		return true

	case gc.OINDEX:
		return false
	}

	return false
}