當前位置: 首頁>>代碼示例>>C#>>正文

C# TProtocol.ReadI16方法代碼示例

本文整理匯總了C#中Thrift.Protocol.TProtocol.ReadI16方法的典型用法代碼示例。如果您正苦於以下問題：C# TProtocol.ReadI16方法的具體用法？C# TProtocol.ReadI16怎麽用？C# TProtocol.ReadI16使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類Thrift.Protocol.TProtocol的用法示例。


在下文中一共展示了TProtocol.ReadI16方法的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C#代碼示例。

示例1: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.I16) {
           ExtendTimes = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:27，代碼來源:CSHeroMaxExtend.cs

示例2: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 10:
         if (field.Type == TType.I16) {
           Level = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 20:
         if (field.Type == TType.Byte) {
           Quality = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:sgyli7，項目名稱:ClientFrameWork，代碼行數:34，代碼來源:SkillInfo.cs

示例3: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.Map) {
           {
             ItemIndexeChanges = new Dictionary<short, short>();
             TMap _map13 = iprot.ReadMapBegin();
             for( int _i14 = 0; _i14 < _map13.Count; ++_i14)
             {
               short _key15;
               short _val16;
               _key15 = iprot.ReadI16();
               _val16 = iprot.ReadI16();
               ItemIndexeChanges[_key15] = _val16;
             }
             iprot.ReadMapEnd();
           }
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:39，代碼來源:SCBuyBackItemSucc.cs

示例4: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.I16) {
           Id = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 2:
         if (field.Type == TType.List) {
           {
             ServerInfos = new List<KXSGCodec.ServerInfo>();
             TList _list0 = iprot.ReadListBegin();
             for( int _i1 = 0; _i1 < _list0.Count; ++_i1)
             {
               KXSGCodec.ServerInfo _elem2 = new KXSGCodec.ServerInfo();
               _elem2 = new KXSGCodec.ServerInfo();
               _elem2.Read(iprot);
               ServerInfos.Add(_elem2);
             }
             iprot.ReadListEnd();
           }
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:45，代碼來源:SCServerListMsg.cs

示例5: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.List) {
           {
             SellItemIndexes = new List<short>();
             TList _list4 = iprot.ReadListBegin();
             for( int _i5 = 0; _i5 < _list4.Count; ++_i5)
             {
               short _elem6 = 0;
               _elem6 = iprot.ReadI16();
               SellItemIndexes.Add(_elem6);
             }
             iprot.ReadListEnd();
           }
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:37，代碼來源:CSSellItems.cs

示例6: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.String) {
           ClientName = iprot.ReadString();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 2:
         if (field.Type == TType.I16) {
           EdamVersionMajor = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 3:
         if (field.Type == TType.I16) {
           EdamVersionMinor = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:phillco，項目名稱:HellForge，代碼行數:41，代碼來源:UserStore.cs

示例7: Read

 public void Read(TProtocol iprot)
 {
     TField field;
     iprot.ReadStructBegin();
     while (true)
     {
       field = iprot.ReadFieldBegin();
       if (field.Type == TType.Stop) {
     break;
       }
       switch (field.ID)
       {
     case 1:
       if (field.Type == TType.Struct) {
     Path = new Pathname();
     Path.Read(iprot);
       } else {
     TProtocolUtil.Skip(iprot, field.Type);
       }
       break;
     case 2:
       if (field.Type == TType.I16) {
     Replication = iprot.ReadI16();
       } else {
     TProtocolUtil.Skip(iprot, field.Type);
       }
       break;
     default:
       TProtocolUtil.Skip(iprot, field.Type);
       break;
       }
       iprot.ReadFieldEnd();
     }
     iprot.ReadStructEnd();
 }
開發者ID:cvs1989，項目名稱:hooyeswidget，代碼行數:35，代碼來源:ThriftHadoopFileSystem.cs

示例8: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 10:
         if (field.Type == TType.I32) {
           CharId = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 20:
         if (field.Type == TType.String) {
           Name = iprot.ReadString();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 30:
         if (field.Type == TType.I32) {
           ProfessionId = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 40:
         if (field.Type == TType.I16) {
           Level = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 50:
         if (field.Type == TType.Byte) {
           Role = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 60:
         if (field.Type == TType.I32) {
           JoinTime = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 70:
         if (field.Type == TType.I32) {
           LastOfflineTime = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 100:
         if (field.Type == TType.Bool) {
           Online = iprot.ReadBool();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:sgyli7，項目名稱:ClientFrameWork，代碼行數:76，代碼來源:ArmyMemberInfo.cs

示例9: Read

 public void Read(TProtocol iprot)
 {
     TField field;
     iprot.ReadStructBegin();
     while (true)
     {
         field = iprot.ReadFieldBegin();
         if (field.Type == TType.Stop)
         {
             break;
         }
         switch (field.ID)
         {
             case 1:
                 if (field.Type == TType.String)
                 {
                     Db_name = iprot.ReadString();
                 }
                 else
                 {
                     TProtocolUtil.Skip(iprot, field.Type);
                 }
                 break;
             case 2:
                 if (field.Type == TType.String)
                 {
                     Tbl_name = iprot.ReadString();
                 }
                 else
                 {
                     TProtocolUtil.Skip(iprot, field.Type);
                 }
                 break;
             case 3:
                 if (field.Type == TType.I16)
                 {
                     Max_parts = iprot.ReadI16();
                 }
                 else
                 {
                     TProtocolUtil.Skip(iprot, field.Type);
                 }
                 break;
             default:
                 TProtocolUtil.Skip(iprot, field.Type);
                 break;
         }
         iprot.ReadFieldEnd();
     }
     iprot.ReadStructEnd();
 }
開發者ID:zbw911，項目名稱:CS4Hadoop，代碼行數:51，代碼來源:ThriftHiveMetastore.cs

示例10: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.Byte) {
           DeviceType = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 2:
         if (field.Type == TType.String) {
           DeviceId = iprot.ReadString();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 3:
         if (field.Type == TType.String) {
           DeviceModel = iprot.ReadString();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 4:
         if (field.Type == TType.I16) {
           ServerId = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:48，代碼來源:CSQuickLoginMsg.cs

示例11: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.I16) {
           OperItemIndex = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 2:
         if (field.Type == TType.I32) {
           UpdateContribExp = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 3:
         if (field.Type == TType.Struct) {
           DelteItems = new SCDeleteItems();
           DelteItems.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:42，代碼來源:SCStrengthItemSucc.cs

示例12: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.String) {
           Guid = iprot.ReadString();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 2:
         if (field.Type == TType.String) {
           NoteGuid = iprot.ReadString();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 3:
         if (field.Type == TType.Struct) {
           Data = new Data();
           Data.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 4:
         if (field.Type == TType.String) {
           Mime = iprot.ReadString();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 5:
         if (field.Type == TType.I16) {
           Width = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 6:
         if (field.Type == TType.I16) {
           Height = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 7:
         if (field.Type == TType.I16) {
           Duration = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 8:
         if (field.Type == TType.Bool) {
           Active = iprot.ReadBool();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 9:
         if (field.Type == TType.Struct) {
           Recognition = new Data();
           Recognition.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 11:
         if (field.Type == TType.Struct) {
           Attributes = new ResourceAttributes();
           Attributes.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 12:
         if (field.Type == TType.I32) {
           UpdateSequenceNum = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 13:
         if (field.Type == TType.Struct) {
           AlternateData = new Data();
           AlternateData.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
//.........這裏部分代碼省略.........
開發者ID:evernote，項目名稱:evernote-demo-metro，代碼行數:101，代碼來源:Resource.cs

示例13: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.I16) {
           OperItemIndex = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 2:
         if (field.Type == TType.Struct) {
           DelteItems = new SCDeleteItems();
           DelteItems.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 3:
         if (field.Type == TType.Struct) {
           EvolutedItemInfo = new SCAddItem();
           EvolutedItemInfo.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 4:
         if (field.Type == TType.Struct) {
           EvolutedItemDetail = new SCItemDetail();
           EvolutedItemDetail.Read(iprot);
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:51，代碼來源:SCEvoluteItemSucc.cs

示例14: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 10:
         if (field.Type == TType.I32) {
           Ib = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 20:
         if (field.Type == TType.I32) {
           Gold = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 30:
         if (field.Type == TType.I16) {
           Level = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 40:
         if (field.Type == TType.I32) {
           Exp = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 50:
         if (field.Type == TType.I16) {
           Power = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 51:
         if (field.Type == TType.I32) {
           LastRecoverPowerTime = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 60:
         if (field.Type == TType.I16) {
           Energy = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 70:
         if (field.Type == TType.List) {
           {
             Bit4CounterList = new List<sbyte>();
             TList _list0 = iprot.ReadListBegin();
             for( int _i1 = 0; _i1 < _list0.Count; ++_i1)
             {
               sbyte _elem2 = 0;
               _elem2 = iprot.ReadByte();
               Bit4CounterList.Add(_elem2);
             }
             iprot.ReadListEnd();
           }
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 80:
         if (field.Type == TType.List) {
           {
             Bit8CounterList = new List<sbyte>();
             TList _list3 = iprot.ReadListBegin();
             for( int _i4 = 0; _i4 < _list3.Count; ++_i4)
             {
               sbyte _elem5 = 0;
               _elem5 = iprot.ReadByte();
               Bit8CounterList.Add(_elem5);
             }
             iprot.ReadListEnd();
           }
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 90:
         if (field.Type == TType.List) {
           {
             Bit32CounterList = new List<int>();
             TList _list6 = iprot.ReadListBegin();
//.........這裏部分代碼省略.........
開發者ID:sgyli7，項目名稱:ClientFrameWork，代碼行數:101，代碼來源:SCSyncCharacterPropertyMsg.cs

示例15: Read

 public void Read (TProtocol iprot)
 {
   TField field;
   iprot.ReadStructBegin();
   while (true)
   {
     field = iprot.ReadFieldBegin();
     if (field.Type == TType.Stop) { 
       break;
     }
     switch (field.ID)
     {
       case 1:
         if (field.Type == TType.Byte) {
           RecoverEnergyMinutes = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 2:
         if (field.Type == TType.Byte) {
           SameTypeExpTimes = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 3:
         if (field.Type == TType.I16) {
           BindItemLimit = iprot.ReadI16();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 4:
         if (field.Type == TType.Byte) {
           SellItemPriceRatio = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 5:
         if (field.Type == TType.Byte) {
           BuybackItemPriceRatio = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 6:
         if (field.Type == TType.Byte) {
           SellItemSaveHours = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 7:
         if (field.Type == TType.Byte) {
           MailShowMax = iprot.ReadByte();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       case 8:
         if (field.Type == TType.I32) {
           MailUpdateInterval = iprot.ReadI32();
         } else { 
           TProtocolUtil.Skip(iprot, field.Type);
         }
         break;
       default: 
         TProtocolUtil.Skip(iprot, field.Type);
         break;
     }
     iprot.ReadFieldEnd();
   }
   iprot.ReadStructEnd();
 }
開發者ID:wuxin0602，項目名稱:Nothing，代碼行數:76，代碼來源:SCServerConfigMsg.cs


注：本文中的Thrift.Protocol.TProtocol.ReadI16方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。