當前位置: 首頁>>代碼示例>>C#>>正文


C# Msg.Put方法代碼示例

本文整理匯總了C#中NetMQ.zmq.Msg.Put方法的典型用法代碼示例。如果您正苦於以下問題:C# Msg.Put方法的具體用法?C# Msg.Put怎麽用?C# Msg.Put使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在NetMQ.zmq.Msg的用法示例。


在下文中一共展示了Msg.Put方法的9個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的C#代碼示例。

示例1: XSetSocketOption

        protected override bool XSetSocketOption(ZmqSocketOptions option, Object optval)
        {
            if (option != ZmqSocketOptions.Subscribe && option != ZmqSocketOptions.Unsubscribe)
            {
                ZError.ErrorNumber = (ErrorNumber.EINVAL);
                return false;
            }

            byte[] val;

            if (optval is String)
                val =  Encoding.ASCII.GetBytes ((String)optval);
            else if (optval is byte[])
                val = (byte[]) optval;
            else
                throw new ArgumentException();

            //  Create the subscription message.
            Msg msg = new Msg(val.Length + 1);
            if (option == ZmqSocketOptions.Subscribe)
                msg.Put((byte)1);
            else if (option == ZmqSocketOptions.Unsubscribe)
                msg.Put((byte)0);
            msg.Put (val,1);

            //  Pass it further on in the stack.
            bool rc = base.XSend (msg, 0);
            return rc;
        }
開發者ID:oskarwkarlsson,項目名稱:netmq,代碼行數:29,代碼來源:Sub.cs

示例2: XSetSocketOption

        protected override void XSetSocketOption(ZmqSocketOptions option, Object optval)
        {
            if (option != ZmqSocketOptions.Subscribe && option != ZmqSocketOptions.Unsubscribe)
            {
                throw InvalidException.Create();
            }

            byte[] val;

            if (optval is String)
                val =  Encoding.ASCII.GetBytes ((String)optval);
            else if (optval is byte[])
                val = (byte[]) optval;
            else
                throw InvalidException.Create();

            //  Create the subscription message.
            Msg msg = new Msg(val.Length + 1);
            if (option == ZmqSocketOptions.Subscribe)
                msg.Put((byte)1);
            else if (option == ZmqSocketOptions.Unsubscribe)
                msg.Put((byte)0);
            msg.Put (val,1);

            //  Pass it further on in the stack.
            base.XSend (msg, 0);
        }
開發者ID:bubbafat,項目名稱:netmq,代碼行數:27,代碼來源:Sub.cs

示例3: XSub

        static XSub()
        {
            s_sendSubscription = (data, size, arg) => {

                                                       	Pipe pipe = (Pipe) arg;

                                                       	//  Create the subsctription message.
                                                       	Msg msg = new Msg(size + 1);
                                                       	msg.Put((byte)1);
                                                       	msg.Put(data,1, size);

                                                       	//  Send it to the pipe.
                                                       	bool sent = pipe.Write (msg);
                                                       	//  If we reached the SNDHWM, and thus cannot send the subscription, drop
                                                       	//  the subscription message instead. This matches the behaviour of
                                                       	//  zmq_setsockopt(ZMQ_SUBSCRIBE, ...), which also drops subscriptions
                                                       	//  when the SNDHWM is reached.
                                                       	if (!sent)
                                                       		msg.Close ();

            };
        }
開發者ID:jasenkin,項目名稱:netmq,代碼行數:22,代碼來源:XSub.cs

示例4: Send

        public static void Send(SocketBase s, byte[] buf, int len, SendReceiveOptions flags)
        {
            if (s == null || !s.CheckTag())
            {
                throw NetMQException.Create(ErrorCode.EFAULT);
            }

            Msg msg = new Msg(len);
            msg.Put(buf, 0, len);

            SendMsg(s, msg, flags);
        }
開發者ID:kamlesh-patel,項目名稱:netmq,代碼行數:12,代碼來源:ZMQ.cs

示例5: PushMsg

        public bool PushMsg(Msg msg)
        {
            Debug.Assert(m_options.SocketType == ZmqSocketType.Pub || m_options.SocketType == ZmqSocketType.Xpub);

            //  The first message is identity.
            //  Let the session process it.
            bool rc = m_session.PushMsg(msg);
            Debug.Assert(rc);

            //  Inject the subscription message so that the ZMQ 2.x peer
            //  receives our messages.
            msg = new Msg(1);
            msg.Put((byte) 1);
            rc = m_session.PushMsg(msg);
            m_session.Flush();

            //  Once we have injected the subscription message, we can
            //  Divert the message flow back to the session.
            Debug.Assert(m_decoder != null);
            m_decoder.SetMsgSink(m_session);

            return rc;
        }
開發者ID:oskarwkarlsson,項目名稱:netmq,代碼行數:23,代碼來源:StreamEngine.cs

示例6: PullMsg

        public virtual Msg PullMsg()
        {
            Msg msg;

            //  First message to send is identity
            if (!m_identitySent)
            {
                msg = new Msg(m_options.IdentitySize);
                msg.Put(m_options.Identity, 0, m_options.IdentitySize);
                m_identitySent = true;
                m_incompleteIn = false;

                return msg;
            }

            if (m_pipe == null || (msg = m_pipe.Read()) == null)
            {
                return null;
            }
            m_incompleteIn = msg.HasMore;

            return msg;
        }
開發者ID:JayShelton,項目名稱:netmq,代碼行數:23,代碼來源:SessionBase.cs

示例7: Connect

        public void Connect(String addr)
        {
            if (m_ctxTerminated)
            {
                throw TerminatingException.Create();
            }

            //  Process pending commands, if any.
            ProcessCommands(0, false);

            string address;
            string protocol;
            DecodeAddress(addr, out address, out protocol);

            CheckProtocol(protocol);

            if (protocol.Equals(Address.InProcProtocol))
            {

                //  TODO: inproc connect is specific with respect to creating pipes
                //  as there's no 'reconnect' functionality implemented. Once that
                //  is in place we should follow generic pipe creation algorithm.

                //  Find the peer endpoint.
                Ctx.Endpoint peer = FindEndpoint(addr);

                // The total HWM for an inproc connection should be the sum of
                // the binder's HWM and the connector's HWM.
                int sndhwm;
                int rcvhwm;
                if (m_options.SendHighWatermark == 0 || peer.Options.ReceiveHighWatermark == 0)
                    sndhwm = 0;
                else
                    sndhwm = m_options.SendHighWatermark + peer.Options.ReceiveHighWatermark;
                if (m_options.ReceiveHighWatermark == 0 || peer.Options.SendHighWatermark == 0)
                    rcvhwm = 0;
                else
                    rcvhwm = m_options.ReceiveHighWatermark + peer.Options.SendHighWatermark;

                //  Create a bi-directional pipe to connect the peers.
                ZObject[] parents = { this, peer.Socket };
                int[] hwms = { sndhwm, rcvhwm };
                bool[] delays = { m_options.DelayOnDisconnect, m_options.DelayOnClose };
                Pipe[] pipes = Pipe.PipePair(parents, hwms, delays);

                //  Attach local end of the pipe to this socket object.
                AttachPipe(pipes[0]);

                //  If required, send the identity of the peer to the local socket.
                if (peer.Options.RecvIdentity)
                {
                    Msg id = new Msg(peer.Options.IdentitySize);
                    id.Put(peer.Options.Identity, 0, peer.Options.IdentitySize);
                    id.SetFlags(MsgFlags.Identity);
                    bool written = pipes[0].Write(id);
                    Debug.Assert(written);
                    pipes[0].Flush();
                }

                //  If required, send the identity of the local socket to the peer.
                if (m_options.RecvIdentity)
                {
                    Msg id = new Msg(m_options.IdentitySize);
                    id.Put(m_options.Identity, 0, m_options.IdentitySize);
                    id.SetFlags(MsgFlags.Identity);
                    bool written = pipes[1].Write(id);
                    Debug.Assert(written);
                    pipes[1].Flush();
                }

                //  Attach remote end of the pipe to the peer socket. Note that peer's
                //  seqnum was incremented in find_endpoint function. We don't need it
                //  increased here.
                SendBind(peer.Socket, pipes[1], false);

                // Save last endpoint URI
                m_options.LastEndpoint = addr;

                return;
            }

            //  Choose the I/O thread to run the session in.
            IOThread ioThread = ChooseIOThread(m_options.Affinity);
            if (ioThread == null)
            {
                throw NetMQException.Create("Empty IO Thread", ErrorCode.EMTHREAD);
            }
            Address paddr = new Address(protocol, address);

            //  Resolve address (if needed by the protocol)
            if (protocol.Equals(Address.TcpProtocol))
            {
                paddr.Resolved = (new TcpAddress());
                paddr.Resolved.Resolve(
                        address, m_options.IPv4Only);
            }
            else if (protocol.Equals(Address.IpcProtocol))
            {
                paddr.Resolved = (new IpcAddress());
                paddr.Resolved.Resolve(address, true);
//.........這裏部分代碼省略.........
開發者ID:hecwow,項目名稱:netmq,代碼行數:101,代碼來源:SocketBase.cs

示例8: Send

        public static int Send(SocketBase s, byte[] buf, int len, SendRecieveOptions flags)
        {
            if (s == null || !s.CheckTag())
            {
                throw new InvalidOperationException();
            }

            Msg msg = new Msg(len);
            msg.Put(buf, 0, len);

            int rc = SendMsg(s, msg, flags);
            if (rc < 0)
            {
                return -1;
            }

            return rc;
        }
開發者ID:oskarwkarlsson,項目名稱:netmq,代碼行數:18,代碼來源:ZMQ.cs

示例9: PullMsg

        public virtual bool PullMsg(ref Msg msg)
        {
            //  First message to send is identity
            if (!m_identitySent)
            {
                msg.InitPool(m_options.IdentitySize);
                msg.Put(m_options.Identity, 0, m_options.IdentitySize);
                m_identitySent = true;
                m_incompleteIn = false;

                return true;
            }

            if (m_pipe == null || !m_pipe.Read(ref msg))
            {
                return false;
            }
            m_incompleteIn = msg.HasMore;

            return true;
        }
開發者ID:bbqchickenrobot,項目名稱:netmq,代碼行數:21,代碼來源:SessionBase.cs


注:本文中的NetMQ.zmq.Msg.Put方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台,相關代碼片段篩選自各路編程大神貢獻的開源項目,源碼版權歸原作者所有,傳播和使用請參考對應項目的License;未經允許,請勿轉載。