本文整理匯總了C++中TPZAutoPointer::ElementVec方法的典型用法代碼示例。如果您正苦於以下問題:C++ TPZAutoPointer::ElementVec方法的具體用法?C++ TPZAutoPointer::ElementVec怎麽用?C++ TPZAutoPointer::ElementVec使用的例子?那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類TPZAutoPointer
的用法示例。
在下文中一共展示了TPZAutoPointer::ElementVec方法的4個代碼示例,這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚,您的評價將有助於係統推薦出更棒的C++代碼示例。
示例1: RefinamentoUniforme
void RefinamentoUniforme(TPZAutoPointer<TPZGeoMesh> gmesh, int nref,TPZVec<int> dims)
{
int ir, iel, k;
int nel=0, dim=0;
int ndims = dims.size();
for(ir = 0; ir < nref; ir++ )
{
TPZVec<TPZGeoEl *> filhos;
nel = gmesh->NElements();
for (iel = 0; iel < nel; iel++ )
{
TPZGeoEl * gel = gmesh->ElementVec()[iel];
if(!gel) DebugStop();
dim = gel->Dimension();
for(k = 0; k<ndims; k++)
{
if(dim == dims[k])
{
gel->Divide (filhos);
break;
}
}
}
}
}
示例2: RefinamentoSingular
void RefinamentoSingular(TPZAutoPointer<TPZGeoMesh> gmesh,int nref)
{
int64_t nnodes = gmesh->NNodes();
int64_t in;
for (in=0; in<nnodes; in++) {
TPZGeoNode *gno = &gmesh->NodeVec()[in];
if (abs(gno->Coord(0))< 1.e-6 && abs(gno->Coord(1)) < 1.e-6) {
break;
}
}
if (in == nnodes) {
DebugStop();
}
TPZGeoElSide gelside;
int64_t nelem = gmesh->NElements();
for (int64_t el = 0; el<nelem; el++) {
TPZGeoEl *gel = gmesh->ElementVec()[el];
int ncorner = gel->NCornerNodes();
for (int ic=0; ic<ncorner; ic++) {
int64_t nodeindex = gel->NodeIndex(ic);
if (nodeindex == in) {
gelside = TPZGeoElSide(gel, ic);
break;
}
}
if (gelside.Element()) {
break;
}
}
if (!gelside.Element()) {
DebugStop();
}
for (int iref = 0; iref <nref; iref++) {
TPZStack<TPZGeoElSide> gelstack;
gelstack.Push(gelside);
TPZGeoElSide neighbour = gelside.Neighbour();
while (neighbour != gelside) {
gelstack.Push(neighbour);
neighbour = neighbour.Neighbour();
}
int64_t nstack = gelstack.size();
for (int64_t ist=0; ist < nstack; ist++) {
if (!gelstack[ist].Element()->HasSubElement()) {
TPZVec<TPZGeoEl *> subel;
gelstack[ist].Element()->Divide(subel);
}
}
}
}
示例3: GetElIndexCoarseMesh
void GetElIndexCoarseMesh(TPZAutoPointer<TPZGeoMesh> gmesh, std::set<int64_t> &coarseindex)
{
int nel = gmesh->NElements();
int iel;
int hassubel=0;
int dim = gmesh->Dimension();
int eldim;
for(iel = 0; iel<nel; iel++)
{
TPZGeoEl * gel = gmesh->ElementVec()[iel];
if(!gel) DebugStop();
hassubel = gel->HasSubElement();
eldim = gel->Dimension();
if(!hassubel && eldim ==dim)
{
coarseindex.insert(gel->Index());
}
}
}
示例4: SubStructure
int SubStructure(TPZAutoPointer<TPZCompMesh> cmesh, REAL height)
{
int nelem = cmesh->NElements();
TPZManVector<int> subindex(nelem,-1);
int iel;
int nsub = 0;
for (iel=0; iel<nelem; iel++)
{
TPZCompEl *cel = cmesh->ElementVec()[iel];
if (!cel) {
continue;
}
TPZGeoEl *gel = cel->Reference();
if (!gel) {
continue;
}
int nsides = gel->NSides();
TPZManVector<REAL> center(gel->Dimension(),0.), xco(3,0.);
gel->CenterPoint(nsides-1,center);
gel->X(center,xco);
REAL z = xco[2];
int floor = (int) z/height;
nsub = (floor+1) > nsub ? (floor+1) : nsub;
subindex[iel] = floor;
}
#ifdef DEBUG
{
TPZGeoMesh *gmesh = cmesh->Reference();
int nelgeo = gmesh->NElements();
TPZVec<int> domaincolor(nelgeo,-999);
int cel;
int nel = cmesh->NElements();
for (cel=0; cel<nel; cel++) {
TPZCompEl *compel = cmesh->ElementVec()[cel];
if(!compel) continue;
TPZGeoEl *gel = compel->Reference();
if (!gel) {
continue;
}
domaincolor[gel->Index()] = subindex[cel];
}
ofstream vtkfile("partition.vtk");
TPZVTKGeoMesh::PrintGMeshVTK(gmesh, vtkfile, domaincolor);
}
#endif
int isub;
TPZManVector<TPZSubCompMesh *> submeshes(nsub,0);
for (isub=0; isub<nsub; isub++)
{
int index;
std::cout << '^'; std::cout.flush();
submeshes[isub] = new TPZSubCompMesh(cmesh,index);
if (index < subindex.NElements())
{
subindex[index] = -1;
}
}
for (iel=0; iel<nelem; iel++)
{
int domindex = subindex[iel];
if (domindex >= 0)
{
TPZCompEl *cel = cmesh->ElementVec()[iel];
if (!cel)
{
continue;
}
submeshes[domindex]->TransferElement(cmesh.operator->(),iel);
}
}
cmesh->ComputeNodElCon();
for (isub=0; isub<nsub; isub++)
{
submeshes[isub]->MakeAllInternal();
std::cout << '*'; std::cout.flush();
}
cmesh->ComputeNodElCon();
cmesh->CleanUpUnconnectedNodes();
return nsub;
}