C++ GET_PKT_DATA函數代碼示例

本文整理匯總了C++中GET_PKT_DATA函數的典型用法代碼示例。如果您正苦於以下問題：C++ GET_PKT_DATA函數的具體用法？C++ GET_PKT_DATA怎麽用？C++ GET_PKT_DATA使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了GET_PKT_DATA函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: SCEnter

/**
 *  \brief Setup a pseudo packet (tunnel)
 *
 *  \param parent parent packet for this pseudo pkt
 *  \param pkt raw packet data
 *  \param len packet data length
 *  \param proto protocol of the tunneled packet
 *
 *  \retval p the pseudo packet or NULL if out of memory
 */
Packet *PacketTunnelPktSetup(ThreadVars *tv, DecodeThreadVars *dtv, Packet *parent,
                             uint8_t *pkt, uint16_t len, uint8_t proto, PacketQueue *pq)
{
    int ret;

    SCEnter();

    /* get us a packet */
    Packet *p = PacketGetFromQueueOrAlloc();
    if (unlikely(p == NULL)) {
        SCReturnPtr(NULL, "Packet");
    }

    /* copy packet and set lenght, proto */
    PacketCopyData(p, pkt, len);
    p->recursion_level = parent->recursion_level + 1;
    p->ts.tv_sec = parent->ts.tv_sec;
    p->ts.tv_usec = parent->ts.tv_usec;
    p->datalink = DLT_RAW;

    /* set the root ptr to the lowest layer */
    if (parent->root != NULL)
        p->root = parent->root;
    else
        p->root = parent;

    /* tell new packet it's part of a tunnel */
    SET_TUNNEL_PKT(p);

    ret = DecodeTunnel(tv, dtv, p, GET_PKT_DATA(p),
                       GET_PKT_LEN(p), pq, proto);

    if (unlikely(ret != TM_ECODE_OK)) {
        /* Not a tunnel packet, just a pseudo packet */
        p->root = NULL;
        UNSET_TUNNEL_PKT(p);
        TmqhOutputPacketpool(tv, p);
        SCReturnPtr(NULL, "Packet");
    }


    /* tell parent packet it's part of a tunnel */
    SET_TUNNEL_PKT(parent);

    /* increment tunnel packet refcnt in the root packet */
    TUNNEL_INCR_PKT_TPR(p);

    /* disable payload (not packet) inspection on the parent, as the payload
     * is the packet we will now run through the system separately. We do
     * check it against the ip/port/other header checks though */
    DecodeSetNoPayloadInspectionFlag(parent);
    SCReturnPtr(p, "Packet");
}

開發者ID:lb7ba6，項目名稱:suricata，代碼行數:63，代碼來源:decode.c

示例2: DecodeRaw

void DecodeRaw(ThreadVars *tv, DecodeThreadVars *dtv, Packet *p, uint8_t *pkt, uint16_t len, PacketQueue *pq)
{
    SCPerfCounterIncr(dtv->counter_raw, tv->sc_perf_pca);

    /* If it is ipv4 or ipv6 it should at least be the size of ipv4 */
    if (len < IPV4_HEADER_LEN) {
        ENGINE_SET_EVENT(p,IPV4_PKT_TOO_SMALL);
        return;
    }

    if (IP_GET_RAW_VER(pkt) == 4) {
        SCLogDebug("IPV4 Packet");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else if (IP_GET_RAW_VER(pkt) == 6) {
        SCLogDebug("IPV6 Packet");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else {
        SCLogDebug("Unknown ip version %" PRIu8 "", IP_GET_RAW_VER(pkt));
        ENGINE_SET_EVENT(p,IPRAW_INVALID_IPV);
    }
    return;
}

開發者ID:2help，項目名稱:suricata，代碼行數:22，代碼來源:decode-raw.c

示例3: DecodePcap

/**
 * \brief This function passes off to link type decoders.
 *
 * DecodePcap reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param t pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into PcapThreadVars for ptv
 * \param pq pointer to the current PacketQueue
 */
TmEcode DecodePcap(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    SCEnter();
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    DecodeUpdatePacketCounters(tv, dtv, p);

    /* call the decoder */
    switch(p->datalink) {
        case LINKTYPE_LINUX_SLL:
            DecodeSll(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        case LINKTYPE_ETHERNET:
            DecodeEthernet(tv, dtv, p,GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        case LINKTYPE_PPP:
            DecodePPP(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        case LINKTYPE_RAW:
            DecodeRaw(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        case LINKTYPE_NULL:
            DecodeNull(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        default:
            SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED, "Error: datalink type %" PRId32 " not yet supported in module DecodePcap", p->datalink);
            break;
    }

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}

開發者ID:norg，項目名稱:suricata，代碼行數:50，代碼來源:source-pcap.c

示例4: DecodeIPFW

/**
 * \brief This function passes off to link type decoders.
 * \todo Unit tests are needed for this module.
 *
 * DecodeIPFW reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param tv pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into IPFWThreadVars for ptv
 * \param pq pointer to the PacketQueue
 */
TmEcode DecodeIPFW(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
    IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    SCEnter();

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));

    /* Process IP packets */
    if (IPV4_GET_RAW_VER(ip4h) == 4) {
        SCLogDebug("DecodeIPFW ip4 processing");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

    } else if(IPV6_GET_RAW_VER(ip6h) == 6) {
        SCLogDebug("DecodeIPFW ip6 processing");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

    } else {
        /* We don't support anything besides IP packets for now, bridged packets? */
        SCLogInfo("IPFW unknown protocol support %02x", *GET_PKT_DATA(p));
       SCReturnInt(TM_ECODE_FAILED);
    }

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}

開發者ID:lb7ba6，項目名稱:suricata，代碼行數:50，代碼來源:source-ipfw.c

示例5: DecodeIPV6RouteTest01

/**
 * \test routing header decode
 */
static int DecodeIPV6RouteTest01 (void)
{

    uint8_t raw_pkt1[] = {
        0x60, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x2b, 0x40,
        0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
        0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
        0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

        0xb2, 0xed, 0x00, 0x50, 0x1b, 0xc7, 0x6a, 0xdf,
        0x00, 0x00, 0x00, 0x00, 0x50, 0x02, 0x20, 0x00,
        0xfa, 0x87, 0x00, 0x00,
    };
    Packet *p1 = PacketGetFromAlloc();
    if (unlikely(p1 == NULL))
        return 0;
    ThreadVars tv;
    DecodeThreadVars dtv;
    int result = 0;
    PacketQueue pq;

    FlowInitConfig(FLOW_QUIET);

    memset(&pq, 0, sizeof(PacketQueue));
    memset(&tv, 0, sizeof(ThreadVars));
    memset(&dtv, 0, sizeof(DecodeThreadVars));

    PacketCopyData(p1, raw_pkt1, sizeof(raw_pkt1));

    DecodeIPV6(&tv, &dtv, p1, GET_PKT_DATA(p1), GET_PKT_LEN(p1), &pq);

    if (!(IPV6_EXTHDR_ISSET_RH(p1))) {
        printf("ipv6 routing header not detected: ");
        goto end;
    }

    if (p1->ip6eh.ip6_exthdrs[0].len != 8) {
        printf("ipv6 routing length incorrect: ");
        goto end;
    }

    result = 1;
end:
    PACKET_RECYCLE(p1);
    SCFree(p1);
    FlowShutdown();
    return result;
}

開發者ID:btbytes，項目名稱:suricata，代碼行數:53，代碼來源:decode-ipv6.c

示例6: DecodeIPV6HopTest01

/**
 * \test HOP header decode
 */
static int DecodeIPV6HopTest01 (void)
{
    uint8_t raw_pkt1[] = {
        0x60,0x00,0x00,0x00,0x00,0x20,0x00,0x01,0xfe,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
        0x02,0x0f,0xfe,0xff,0xfe,0x98,0x3d,0x01,0xff,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x3a,0x00,0x05,0x02,0x00,0x00,0x00,0x00,
        0x82,0x00,0x1c,0x6f,0x27,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
        0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
    };
    Packet *p1 = PacketGetFromAlloc();
    if (unlikely(p1 == NULL))
        return 0;
    ThreadVars tv;
    DecodeThreadVars dtv;
    int result = 0;
    PacketQueue pq;

    FlowInitConfig(FLOW_QUIET);

    memset(&pq, 0, sizeof(PacketQueue));
    memset(&tv, 0, sizeof(ThreadVars));
    memset(&dtv, 0, sizeof(DecodeThreadVars));

    PacketCopyData(p1, raw_pkt1, sizeof(raw_pkt1));

    DecodeIPV6(&tv, &dtv, p1, GET_PKT_DATA(p1), GET_PKT_LEN(p1), &pq);

    if (!(IPV6_EXTHDR_ISSET_HH(p1))) {
        printf("ipv6 routing header not detected: ");
        goto end;
    }

    if (p1->ip6eh.ip6_exthdrs[0].len != 8) {
        printf("ipv6 routing length incorrect: ");
        goto end;
    }

    if (ENGINE_ISSET_EVENT(p1, IPV6_HOPOPTS_UNKNOWN_OPT)) {
        printf("engine event IPV6_HOPOPTS_UNKNOWN_OPT set: ");
        goto end;
    }

    result = 1;
end:
    PACKET_RECYCLE(p1);
    SCFree(p1);
    FlowShutdown();
    return result;
}

開發者ID:btbytes，項目名稱:suricata，代碼行數:52，代碼來源:decode-ipv6.c

示例7: DecodeNFQ

/**
 * \brief Decode a packet coming from NFQ
 */
TmEcode DecodeNFQ(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{

    IPV4Hdr *ip4h = (IPV4Hdr *)GET_PKT_DATA(p);
    IPV6Hdr *ip6h = (IPV6Hdr *)GET_PKT_DATA(p);
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
    SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
                           (GET_PKT_LEN(p) * 8)/1000000.0);
#endif

    if (IPV4_GET_RAW_VER(ip4h) == 4) {
        SCLogDebug("IPv4 packet");
        DecodeIPV4(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else if(IPV6_GET_RAW_VER(ip6h) == 6) {
        SCLogDebug("IPv6 packet");
        DecodeIPV6(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
    } else {
        SCLogDebug("packet unsupported by NFQ, first byte: %02x", *GET_PKT_DATA(p));
    }

    PacketDecodeFinalize(tv, dtv, p);

    return TM_ECODE_OK;
}

開發者ID:yuecailing，項目名稱:rep_test，代碼行數:39，代碼來源:source-nfq.c

示例8: AlertJsonPacket

static void AlertJsonPacket(const Packet *p, json_t *js)
{
    unsigned long len = GET_PKT_LEN(p) * 2;
    uint8_t encoded_packet[len];
    Base64Encode((unsigned char*) GET_PKT_DATA(p), GET_PKT_LEN(p),
        encoded_packet, &len);
    json_object_set_new(js, "packet", json_string((char *)encoded_packet));

    /* Create packet info. */
    json_t *packetinfo_js = json_object();
    if (unlikely(packetinfo_js == NULL)) {
        return;
    }
    json_object_set_new(packetinfo_js, "linktype", json_integer(p->datalink));
    json_object_set_new(js, "packet_info", packetinfo_js);
}

開發者ID:P1sec，項目名稱:suricata，代碼行數:16，代碼來源:output-json-alert.c

示例9: AlertFastLogDecoderEvent

TmEcode AlertFastLogDecoderEvent(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    AlertFastLogThread *aft = (AlertFastLogThread *)data;
    int i;
    char timebuf[64];
    char *action = "";
    extern uint8_t engine_mode;

    if (p->alerts.cnt == 0)
        return TM_ECODE_OK;

    CreateTimeString(&p->ts, timebuf, sizeof(timebuf));

    for (i = 0; i < p->alerts.cnt; i++) {
        PacketAlert *pa = &p->alerts.alerts[i];
        if (unlikely(pa->s == NULL)) {
            continue;
        }

        if ((pa->action & ACTION_DROP) && IS_ENGINE_MODE_IPS(engine_mode)) {
            action = "[Drop] ";
        } else if (pa->action & ACTION_DROP) {
            action = "[wDrop] ";
        }

        SCMutexLock(&aft->file_ctx->fp_mutex);
        fprintf(aft->file_ctx->fp, "%s  %s[**] [%" PRIu32 ":%" PRIu32
                ":%" PRIu32 "] %s [**] [Classification: %s] [Priority: "
                "%" PRIu32 "] [**] [Raw pkt: ", timebuf, action, pa->s->gid,
                pa->s->id, pa->s->rev, pa->s->msg, pa->s->class_msg, pa->s->prio);

        PrintRawLineHexFp(aft->file_ctx->fp, GET_PKT_DATA(p), GET_PKT_LEN(p) < 32 ? GET_PKT_LEN(p) : 32);

        if (p->pcap_cnt != 0) {
            fprintf(aft->file_ctx->fp, "] [pcap file packet: %"PRIu64"]\n", p->pcap_cnt);
        } else {
            fprintf(aft->file_ctx->fp, "]\n");
        }

        fflush(aft->file_ctx->fp);
        aft->file_ctx->alerts++;
        SCMutexUnlock(&aft->file_ctx->fp_mutex);
    }

    return TM_ECODE_OK;
}

開發者ID:decanio，項目名稱:suricata-tilera，代碼行數:46，代碼來源:alert-fastlog.c

示例10: DecodeErfDag

/**
 * \brief   This function passes off to link type decoders.
 *
 * DecodeErfDag reads packets from the PacketQueue and passes
 * them off to the proper link type decoder.
 *
 * \param t pointer to ThreadVars
 * \param p pointer to the current packet
 * \param data pointer that gets cast into PcapThreadVars for ptv
 * \param pq pointer to the current PacketQueue
 */
TmEcode
DecodeErfDag(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq,
    PacketQueue *postpq)
{
    SCEnter();
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
//    SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);

    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
    SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
                           (GET_PKT_LEN(p) * 8)/1000000.0);
#endif

    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca,
        GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca,
        GET_PKT_LEN(p));

        /* call the decoder */
    switch(p->datalink) {
        case LINKTYPE_ETHERNET:
            DecodeEthernet(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);
            break;
        default:
            SCLogError(SC_ERR_DATALINK_UNIMPLEMENTED,
                "Error: datalink type %" PRId32
                " not yet supported in module DecodeErfDag",
                p->datalink);
            break;
    }

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}

開發者ID:lb7ba6，項目名稱:suricata，代碼行數:56，代碼來源:source-erf-dag.c

示例11: DecodePcapFile

TmEcode DecodePcapFile(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    SCEnter();
    DecodeThreadVars *dtv = (DecodeThreadVars *)data;

    /* XXX HACK: flow timeout can call us for injected pseudo packets
     *           see bug: https://redmine.openinfosecfoundation.org/issues/1107 */
    if (p->flags & PKT_PSEUDO_STREAM_END)
        return TM_ECODE_OK;

    /* update counters */
    SCPerfCounterIncr(dtv->counter_pkts, tv->sc_perf_pca);
//    SCPerfCounterIncr(dtv->counter_pkts_per_sec, tv->sc_perf_pca);

    SCPerfCounterAddUI64(dtv->counter_bytes, tv->sc_perf_pca, GET_PKT_LEN(p));
#if 0
    SCPerfCounterAddDouble(dtv->counter_bytes_per_sec, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterAddDouble(dtv->counter_mbit_per_sec, tv->sc_perf_pca,
                           (GET_PKT_LEN(p) * 8)/1000000.0 );
#endif
    SCPerfCounterAddUI64(dtv->counter_avg_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));
    SCPerfCounterSetUI64(dtv->counter_max_pkt_size, tv->sc_perf_pca, GET_PKT_LEN(p));

    double curr_ts = p->ts.tv_sec + p->ts.tv_usec / 1000.0;
    if (curr_ts < prev_signaled_ts || (curr_ts - prev_signaled_ts) > 60.0) {
        prev_signaled_ts = curr_ts;
        FlowWakeupFlowManagerThread();
    }

    /* update the engine time representation based on the timestamp
     * of the packet. */
    TimeSet(&p->ts);

    /* call the decoder */
    pcap_g.Decoder(tv, dtv, p, GET_PKT_DATA(p), GET_PKT_LEN(p), pq);

#ifdef DEBUG
    BUG_ON(p->pkt_src != PKT_SRC_WIRE && p->pkt_src != PKT_SRC_FFR_V2);
#endif

    PacketDecodeFinalize(tv, dtv, p);

    SCReturnInt(TM_ECODE_OK);
}

開發者ID:Erdeep，項目名稱:suricata，代碼行數:44，代碼來源:source-pcap-file.c

示例12: AlertDebugLogDecoderEvent

TmEcode AlertDebugLogDecoderEvent(ThreadVars *tv, Packet *p, void *data, PacketQueue *pq, PacketQueue *postpq)
{
    AlertDebugLogThread *aft = (AlertDebugLogThread *)data;
    int i;
    char timebuf[64];

    if (p->alerts.cnt == 0)
        return TM_ECODE_OK;

    CreateTimeString(&p->ts, timebuf, sizeof(timebuf));

    SCMutexLock(&aft->file_ctx->fp_mutex);

    fprintf(aft->file_ctx->fp, "+================\n");
    fprintf(aft->file_ctx->fp, "TIME:              %s\n", timebuf);
    if (p->pcap_cnt > 0) {
        fprintf(aft->file_ctx->fp, "PCAP PKT NUM:      %"PRIu64"\n", p->pcap_cnt);
    }
    fprintf(aft->file_ctx->fp, "ALERT CNT:         %" PRIu32 "\n", p->alerts.cnt);

    for (i = 0; i < p->alerts.cnt; i++) {
        PacketAlert *pa = &p->alerts.alerts[i];

        fprintf(aft->file_ctx->fp, "ALERT MSG [%02d]:    %s\n", i, pa->msg);
        fprintf(aft->file_ctx->fp, "ALERT GID [%02d]:    %" PRIu32 "\n", i, pa->gid);
        fprintf(aft->file_ctx->fp, "ALERT SID [%02d]:    %" PRIu32 "\n", i, pa->sid);
        fprintf(aft->file_ctx->fp, "ALERT REV [%02d]:    %" PRIu32 "\n", i, pa->rev);
        fprintf(aft->file_ctx->fp, "ALERT CLASS [%02d]:  %s\n", i, pa->class_msg);
        fprintf(aft->file_ctx->fp, "ALERT PRIO [%02d]:   %" PRIu32 "\n", i, pa->prio);
    }

    aft->file_ctx->alerts += p->alerts.cnt;

    fprintf(aft->file_ctx->fp, "PACKET LEN:        %" PRIu32 "\n", GET_PKT_LEN(p));
    fprintf(aft->file_ctx->fp, "PACKET:\n");
    PrintRawDataFp(aft->file_ctx->fp, GET_PKT_DATA(p), GET_PKT_LEN(p));

    fflush(aft->file_ctx->fp);
    SCMutexUnlock(&aft->file_ctx->fp_mutex);

    return TM_ECODE_OK;
}

開發者ID:58698301，項目名稱:suricata，代碼行數:42，代碼來源:alert-debuglog.c

示例13: DecodeIPV6FragHeader

static inline
#endif
void DecodeIPV6FragHeader(Packet *p, uint8_t *pkt,
                          uint16_t hdrextlen, uint16_t plen,
                          uint16_t prev_hdrextlen)
{
    uint16_t frag_offset = (*(pkt + 2) << 8 | *(pkt + 3)) & 0xFFF8;
    int frag_morefrags   = (*(pkt + 2) << 8 | *(pkt + 3)) & 0x0001;

    p->ip6eh.fh_offset = frag_offset;
    p->ip6eh.fh_more_frags_set = frag_morefrags ? TRUE : FALSE;
    p->ip6eh.fh_nh = *pkt;

    uint32_t fh_id;
    memcpy(&fh_id, pkt+4, 4);
    p->ip6eh.fh_id = SCNtohl(fh_id);

    SCLogDebug("IPV6 FH: offset %u, mf %s, nh %u, id %u/%x",
            p->ip6eh.fh_offset,
            p->ip6eh.fh_more_frags_set ? "true" : "false",
            p->ip6eh.fh_nh,
            p->ip6eh.fh_id, p->ip6eh.fh_id);

    // store header offset, data offset
    uint16_t frag_hdr_offset = (uint16_t)(pkt - GET_PKT_DATA(p));
    uint16_t data_offset = (uint16_t)(frag_hdr_offset + hdrextlen);
    uint16_t data_len = plen - hdrextlen;

    p->ip6eh.fh_header_offset = frag_hdr_offset;
    p->ip6eh.fh_data_offset = data_offset;
    p->ip6eh.fh_data_len = data_len;

    /* if we have a prev hdr, store the type and offset of it */
    if (prev_hdrextlen) {
        p->ip6eh.fh_prev_hdr_offset = frag_hdr_offset - prev_hdrextlen;
    }

    SCLogDebug("IPV6 FH: frag_hdr_offset %u, data_offset %u, data_len %u",
            p->ip6eh.fh_header_offset, p->ip6eh.fh_data_offset,
            p->ip6eh.fh_data_len);
}

開發者ID:micsoftvn，項目名稱:suricata，代碼行數:41，代碼來源:decode-ipv6.c

示例14: DecodeIP6inIP6

/**
 * \brief Function to decode IPv4 in IPv6 packets
 *
 */
static void DecodeIP6inIP6(ThreadVars *tv, DecodeThreadVars *dtv, Packet *p, uint8_t *pkt, uint16_t plen, PacketQueue *pq)
{

    if (unlikely(plen < IPV6_HEADER_LEN)) {
        ENGINE_SET_EVENT(p, IPV6_IN_IPV6_PKT_TOO_SMALL);
        return;
    }
    if (IP_GET_RAW_VER(pkt) == 6) {
        if (pq != NULL) {
            Packet *tp = PacketPseudoPktSetup(p, pkt, plen, IPPROTO_IPV6);
            if (tp != NULL) {
                DecodeTunnel(tv, dtv, tp, GET_PKT_DATA(tp),
                             GET_PKT_LEN(tp), pq, IPPROTO_IP);
                PacketEnqueue(pq,tp);
                SCPerfCounterIncr(dtv->counter_ipv6inipv6, tv->sc_perf_pca);
                return;
            }
        }
    } else {
        ENGINE_SET_EVENT(p, IPV6_IN_IPV6_WRONG_IP_VER);
    }
    return;
}

開發者ID:xrl，項目名稱:suricata，代碼行數:27，代碼來源:decode-ipv6.c

示例15: DecodeIPV6RouteTest01

/**
 * \test routing header decode
 */
static int DecodeIPV6RouteTest01 (void)
{
    uint8_t raw_pkt1[] = {
        0x60, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x2b, 0x40,
        0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
        0x20, 0x01, 0xaa, 0xaa, 0x00, 0x01, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
        0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

        0xb2, 0xed, 0x00, 0x50, 0x1b, 0xc7, 0x6a, 0xdf,
        0x00, 0x00, 0x00, 0x00, 0x50, 0x02, 0x20, 0x00,
        0xfa, 0x87, 0x00, 0x00,
    };
    Packet *p1 = PacketGetFromAlloc();
    FAIL_IF(unlikely(p1 == NULL));
    ThreadVars tv;
    DecodeThreadVars dtv;
    PacketQueue pq;

    FlowInitConfig(FLOW_QUIET);

    memset(&pq, 0, sizeof(PacketQueue));
    memset(&tv, 0, sizeof(ThreadVars));
    memset(&dtv, 0, sizeof(DecodeThreadVars));

    PacketCopyData(p1, raw_pkt1, sizeof(raw_pkt1));

    DecodeIPV6(&tv, &dtv, p1, GET_PKT_DATA(p1), GET_PKT_LEN(p1), &pq);

    FAIL_IF (!(IPV6_EXTHDR_ISSET_RH(p1)));
    FAIL_IF (p1->ip6eh.rh_type != 0);
    PACKET_RECYCLE(p1);
    SCFree(p1);
    FlowShutdown();
    PASS;
}

開發者ID:micsoftvn，項目名稱:suricata，代碼行數:40，代碼來源:decode-ipv6.c

注：本文中的GET_PKT_DATA函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。