當前位置: 首頁>>代碼示例>>C++>>正文

C++ FUNC函數代碼示例

本文整理匯總了C++中FUNC函數的典型用法代碼示例。如果您正苦於以下問題：C++ FUNC函數的具體用法？C++ FUNC怎麽用？C++ FUNC使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。


在下文中一共展示了FUNC函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: DRIVER_INIT_MEMBER

DRIVER_INIT_MEMBER(gstriker_state,vgoalsoc)
{
    m_gametype = 3;
    mcu_init();

    m_maincpu->space(AS_PROGRAM).install_write_handler(0x200090, 0x200091, write16_delegate(FUNC(gstriker_state::vbl_toggle_w),this)); // vblank toggle
    m_maincpu->space(AS_PROGRAM).install_read_handler(0x200090, 0x200091, read16_delegate(FUNC(gstriker_state::vbl_toggle_r),this));
}
開發者ID:j26w，項目名稱:mame，代碼行數:8，代碼來源:gstriker.c

示例2: map

void bwidow_state::bwidow_map(address_map &map)
{
	map(0x0000, 0x07ff).ram();
	map(0x2000, 0x27ff).ram().share("vectorram").region("maincpu", 0x2000);
	map(0x2800, 0x5fff).rom();
	map(0x6000, 0x67ff).rw("pokey1", FUNC(pokey_device::read), FUNC(pokey_device::write));
	map(0x6800, 0x6fff).rw("pokey2", FUNC(pokey_device::read), FUNC(pokey_device::write));
	map(0x7000, 0x7000).r(FUNC(bwidow_state::earom_read));
	map(0x7800, 0x7800).portr("IN0");
	map(0x8000, 0x8000).portr("IN3");
	map(0x8800, 0x8800).portr("IN4");
	map(0x8800, 0x8800).w(FUNC(bwidow_state::bwidow_misc_w)); /* coin counters, leds */
	map(0x8840, 0x8840).w("avg", FUNC(avg_device::go_w));
	map(0x8880, 0x8880).w("avg", FUNC(avg_device::reset_w));
	map(0x88c0, 0x88c0).w(FUNC(bwidow_state::irq_ack_w)); /* interrupt acknowledge */
	map(0x8900, 0x8900).w(FUNC(bwidow_state::earom_control_w));
	map(0x8940, 0x897f).w(FUNC(bwidow_state::earom_write));
	map(0x8980, 0x89ed).nopw(); /* watchdog clear */
	map(0x9000, 0xffff).rom();
}
開發者ID:Octocontrabass，項目名稱:mame，代碼行數:20，代碼來源:bwidow.cpp

示例3: auto_alloc_array

void esripsys_state::video_start()
{
	struct line_buffer_t *line_buffer = m_line_buffer;
	int i;

	/* Allocate memory for the two 512-pixel line buffers */
	line_buffer[0].colour_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[0].intensity_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[0].priority_buf = auto_alloc_array(machine(), UINT8, 512);

	line_buffer[1].colour_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[1].intensity_buf = auto_alloc_array(machine(), UINT8, 512);
	line_buffer[1].priority_buf = auto_alloc_array(machine(), UINT8, 512);

	/* Create and initialise the HBLANK timers */
	m_hblank_start_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(esripsys_state::hblank_start_callback),this));
	m_hblank_end_timer = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(esripsys_state::hblank_end_callback),this));
	m_hblank_start_timer->adjust(m_screen->time_until_pos(0, ESRIPSYS_HBLANK_START));

	/* Create the sprite scaling table */
	m_scale_table = auto_alloc_array(machine(), UINT8, 64 * 64);

	for (i = 0; i < 64; ++i)
	{
		int j;

		for (j = 1; j < 65; ++j)
		{
			int p0 = 0;
			int p1 = 0;
			int p2 = 0;
			int p3 = 0;
			int p4 = 0;
			int p5 = 0;

			if (i & 0x1)
				p0 = BIT(j, 5) && !BIT(j, 4) && !BIT(j,3) && !BIT(j, 2) && !BIT(j, 1) && !BIT(j, 0);
			if (i & 0x2)
				p1 = BIT(j, 4) && !BIT(j, 3) && !BIT(j, 2) && !BIT(j, 1) && !BIT(j, 0);
			if (i & 0x4)
				p2 = BIT(j,3) && !BIT(j, 2) && !BIT(j, 1) && !BIT(j, 0);
			if (i & 0x8)
				p3 = BIT(j, 2) && !BIT(j,1) && !BIT(j,0);
			if (i & 0x10)
				p4 = BIT(j, 1) && !BIT(j, 0);
			if (i & 0x20)
				p5 = BIT(j, 0);

			m_scale_table[i * 64 + j - 1] = p0 | p1 | p2 | p3 | p4 | p5;
		}
	}

	/* Now create a lookup table for scaling the sprite 'fig' value */
	m_fig_scale_table = auto_alloc_array(machine(), UINT8, 1024 * 64);

	for (i = 0; i < 1024; ++i)
	{
		int scale;

		for (scale = 0; scale < 64; ++scale)
		{
			int input_pixels = i + 1;
			int scaled_pixels = 0;

			while (input_pixels)
			{
				if (m_scale_table[scale * 64 + (scaled_pixels & 0x3f)] == 0)
					input_pixels--;

				scaled_pixels++;
			}

			m_fig_scale_table[i * 64 + scale] = scaled_pixels - 1;
		}
	}

	/* Register stuff for state saving */
	save_pointer(NAME(line_buffer[0].colour_buf), 512);
	save_pointer(NAME(line_buffer[0].intensity_buf), 512);
	save_pointer(NAME(line_buffer[0].priority_buf), 512);

	save_pointer(NAME(line_buffer[1].colour_buf), 512);
	save_pointer(NAME(line_buffer[1].intensity_buf), 512);
	save_pointer(NAME(line_buffer[1].priority_buf), 512);

	save_item(NAME(m_video_firq));
	save_item(NAME(m_bg_intensity));
	save_item(NAME(m_hblank));
	save_item(NAME(m_video_firq_en));
	save_item(NAME(m_frame_vbl));
	save_item(NAME(m_12sel));
}
開發者ID:dinkc64，項目名稱:mame，代碼行數:92，代碼來源:esripsys.c

示例4: tilemap_get_info_delegate

void cischeat_state::create_tilemaps()
{
	int layer, i;

	for (layer = 0; layer < 3; layer++)
	{
		/* 16x16 tilemaps */
		m_tilemap[layer][0][0] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 16, TILES_PER_PAGE_Y * 2);
		m_tilemap[layer][0][1] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 8, TILES_PER_PAGE_Y * 4);
		m_tilemap[layer][0][2] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 4, TILES_PER_PAGE_Y * 8);
		m_tilemap[layer][0][3] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_16x16),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_16x16),this),
									8,8, TILES_PER_PAGE_X * 2, TILES_PER_PAGE_Y * 16);

		/* 8x8 tilemaps */
		m_tilemap[layer][1][0] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 8, TILES_PER_PAGE_Y * 1);
		m_tilemap[layer][1][1] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 4, TILES_PER_PAGE_Y * 2);
		m_tilemap[layer][1][2] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 4, TILES_PER_PAGE_Y * 2);
		m_tilemap[layer][1][3] = &machine().tilemap().create(m_gfxdecode, tilemap_get_info_delegate(FUNC(cischeat_state::cischeat_get_scroll_tile_info_8x8),this), tilemap_mapper_delegate(FUNC(cischeat_state::cischeat_scan_8x8),this),
									8,8, TILES_PER_PAGE_X * 2, TILES_PER_PAGE_Y * 4);

		/* set user data and transparency */
		for (i = 0; i < 8; i++)
		{
			m_tilemap[layer][i/4][i%4]->set_user_data((void *)(FPTR)layer);
			m_tilemap[layer][i/4][i%4]->set_transparent_pen(15);
		}
	}
}
開發者ID:dinkc64，項目名稱:mame，代碼行數:34，代碼來源:cischeat.c

示例5: map

void aic6250_device::map(address_map &map)
{
	map(0x0, 0x0).rw(FUNC(aic6250_device::dma_count_l_r), FUNC(aic6250_device::dma_count_l_w));
	map(0x1, 0x1).rw(FUNC(aic6250_device::dma_count_m_r), FUNC(aic6250_device::dma_count_m_w));
	map(0x2, 0x2).rw(FUNC(aic6250_device::dma_count_h_r), FUNC(aic6250_device::dma_count_h_w));
	map(0x3, 0x3).w(FUNC(aic6250_device::int_msk_reg_0_w));
	map(0x4, 0x4).w(FUNC(aic6250_device::offset_cntrl_w));
	map(0x5, 0x5).rw(FUNC(aic6250_device::fifo_status_r), FUNC(aic6250_device::dma_cntrl_w));
	map(0x6, 0x6).rw(FUNC(aic6250_device::rev_cntrl_r), FUNC(aic6250_device::int_msk_reg_1_w));
	map(0x7, 0x7).rw(FUNC(aic6250_device::status_reg_0_r), FUNC(aic6250_device::control_reg_0_w));
	map(0x8, 0x8).rw(FUNC(aic6250_device::status_reg_1_r), FUNC(aic6250_device::control_reg_1_w));
	map(0x9, 0x9).rw(FUNC(aic6250_device::scsi_signal_reg_r), FUNC(aic6250_device::scsi_signal_reg_w));
	map(0xa, 0xa).rw(FUNC(aic6250_device::scsi_id_data_r), FUNC(aic6250_device::scsi_id_data_w));
	map(0xb, 0xb).r(FUNC(aic6250_device::source_dest_id_r));
	map(0xc, 0xc).rw(FUNC(aic6250_device::memory_data_r), FUNC(aic6250_device::memory_data_w));
	map(0xd, 0xd).rw(FUNC(aic6250_device::port_a_r), FUNC(aic6250_device::port_a_w));
	map(0xe, 0xe).rw(FUNC(aic6250_device::port_b_r), FUNC(aic6250_device::port_b_w));
	map(0xf, 0xf).rw(FUNC(aic6250_device::scsi_latch_data_r), FUNC(aic6250_device::scsi_bsy_rst_w));
}
開發者ID:rfka01，項目名稱:mame，代碼行數:19，代碼來源:aic6250.cpp

示例6: poly_free

/******************************************************************/

void galastrm_state::galastrm_exit()
{
	poly_free(m_poly);
}

void galastrm_state::video_start()
{
	m_spritelist = auto_alloc_array(machine(), struct gs_tempsprite, 0x4000);

	m_screen->register_screen_bitmap(m_tmpbitmaps);
	m_screen->register_screen_bitmap(m_polybitmap);

	m_poly = poly_alloc(machine(), 16, sizeof(gs_poly_extra_data), POLYFLAG_ALLOW_QUADS);
	machine().add_notifier(MACHINE_NOTIFY_EXIT, machine_notify_delegate(FUNC(galastrm_state::galastrm_exit), this));
}

/************************************************************
            SPRITE DRAW ROUTINES

We draw a series of small tiles ("chunks") together to
create each big sprite. The spritemap rom provides the lookup
table for this. The game hardware looks up 16x16 sprite chunks
from the spritemap rom, creating a 64x64 sprite like this:

     0  1  2  3
     4  5  6  7
     8  9 10 11
    12 13 14 15
開發者ID:gbraad，項目名稱:mame，代碼行數:30，代碼來源:galastrm.c

示例7: FUNC

    int quot, rem; \
} div_t; \
\
typedef struct { \
    int quot, rem; \
} ldiv_t; \
";
#endif

#define MIN_OPT_LEVEL 2
#include "rodefs.h"

/* all stdlib.h functions */
const PICOC_REG_TYPE StdlibFunctions[] = {
#ifndef NO_FP
    { FUNC(StdlibAtof),           PROTO("float atof(char *);") },
    { FUNC(StdlibStrtod),         PROTO("float strtod(char *,char **);") },
#endif
    { FUNC(StdlibAtoi),           PROTO("int atoi(char *);") },
    { FUNC(StdlibAtol),           PROTO("int atol(char *);") },
    { FUNC(StdlibStrtol),         PROTO("int strtol(char *,char **,int);") },
    { FUNC(StdlibStrtoul),        PROTO("int strtoul(char *,char **,int);") },
    { FUNC(StdlibMalloc),         PROTO("void *malloc(int);") },
    { FUNC(StdlibCalloc),         PROTO("void *calloc(int,int);") },
    { FUNC(StdlibRealloc),        PROTO("void *realloc(void *,int);") },
    { FUNC(StdlibFree),           PROTO("void free(void *);") },
    { FUNC(StdlibRand),           PROTO("int rand();") },
    { FUNC(StdlibSrand),          PROTO("void srand(int);") },
    { FUNC(StdlibAbort),          PROTO("void abort();") },
    { FUNC(StdlibExit),           PROTO("void exit(int);") },
    { FUNC(StdlibGetenv),         PROTO("char *getenv(char *);") },
開發者ID:fjrti，項目名稱:remix，代碼行數:31，代碼來源:stdlib.c

示例8: MCFG_SCREEN_VISIBLE_AREA

	MCFG_SCREEN_VISIBLE_AREA(0, 640-1, 0, 480-1)
	MCFG_SCREEN_UPDATE_DEVICE("crtc", sy6545_1_device, screen_update)
	MCFG_PALETTE_ADD_MONOCHROME("palette")
	MCFG_DEVICE_ADD("gfxdecode", GFXDECODE, "palette", gfx_v6809)

	/* sound hardware */
	SPEAKER(config, "mono").front_center();
	MCFG_DEVICE_ADD("speaker", SPEAKER_SOUND)
	MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.50)

	/* devices */
	SY6545_1(config, m_crtc, 16_MHz_XTAL / 8);
	m_crtc->set_screen("screen");
	m_crtc->set_show_border_area(false);
	m_crtc->set_char_width(8);
	m_crtc->set_update_row_callback(FUNC(v6809_state::crtc_update_row), this);
	m_crtc->set_on_update_addr_change_callback(FUNC(v6809_state::crtc_update_addr), this);

	generic_keyboard_device &keyboard(GENERIC_KEYBOARD(config, "keyboard", 0));
	keyboard.set_keyboard_callback(FUNC(v6809_state::kbd_put));

// port A = drive select and 2 control lines ; port B = keyboard
// CB2 connects to the interrupt pin of the RTC (the rtc code doesn't support it)
	PIA6821(config, m_pia0, 0);
	m_pia0->readpb_handler().set(FUNC(v6809_state::pb_r));
	m_pia0->writepa_handler().set(FUNC(v6809_state::pa_w));
	m_pia0->irqa_handler().set_inputline("maincpu", M6809_IRQ_LINE);
	m_pia0->irqb_handler().set_inputline("maincpu", M6809_IRQ_LINE);

// no idea what this does
	pia6821_device &pia1(PIA6821(config, "pia1", 0));
開發者ID:Octocontrabass，項目名稱:mame，代碼行數:31，代碼來源:v6809.cpp

示例9: assert

void sdl_osd_interface::init(running_machine &machine)
{
	// call our parent
	osd_interface::init(machine);

	sdl_options &options = downcast<sdl_options &>(machine.options());
	const char *stemp;

	// determine if we are benchmarking, and adjust options appropriately
	int bench = options.bench();
	astring error_string;
	if (bench > 0)
	{
		options.set_value(OPTION_THROTTLE, false, OPTION_PRIORITY_MAXIMUM, error_string);
		options.set_value(OPTION_SOUND, false, OPTION_PRIORITY_MAXIMUM, error_string);
		options.set_value(SDLOPTION_VIDEO, "none", OPTION_PRIORITY_MAXIMUM, error_string);
		options.set_value(OPTION_SECONDS_TO_RUN, bench, OPTION_PRIORITY_MAXIMUM, error_string);
		assert(!error_string);
	}

	// Some driver options - must be before audio init!
	stemp = options.audio_driver();
	if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
	{
		mame_printf_verbose("Setting SDL audiodriver '%s' ...\n", stemp);
		osd_setenv(SDLENV_AUDIODRIVER, stemp, 1);
	}

	stemp = options.video_driver();
	if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
	{
		mame_printf_verbose("Setting SDL videodriver '%s' ...\n", stemp);
		osd_setenv(SDLENV_VIDEODRIVER, stemp, 1);
	}

#if (SDLMAME_SDL2)
		stemp = options.render_driver();
		if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
		{
			mame_printf_verbose("Setting SDL renderdriver '%s' ...\n", stemp);
			//osd_setenv(SDLENV_RENDERDRIVER, stemp, 1);
			SDL_SetHint(SDL_HINT_RENDER_DRIVER, stemp);
		}
#endif

	/* Set the SDL environment variable for drivers wanting to load the
	 * lib at startup.
	 */
#if USE_OPENGL
	/* FIXME: move lib loading code from drawogl.c here */

	stemp = options.gl_lib();
	if (stemp != NULL && strcmp(stemp, SDLOPTVAL_AUTO) != 0)
	{
		osd_setenv("SDL_VIDEO_GL_DRIVER", stemp, 1);
		mame_printf_verbose("Setting SDL_VIDEO_GL_DRIVER = '%s' ...\n", stemp);
	}
#endif

	/* get number of processors */
	stemp = options.numprocessors();

	osd_num_processors = 0;

	if (strcmp(stemp, "auto") != 0)
	{
		osd_num_processors = atoi(stemp);
		if (osd_num_processors < 1)
		{
			mame_printf_warning("Warning: numprocessors < 1 doesn't make much sense. Assuming auto ...\n");
			osd_num_processors = 0;
		}
	}

	/* Initialize SDL */

	if (!SDLMAME_INIT_IN_WORKER_THREAD)
	{
#if (SDLMAME_SDL2)
		if (SDL_InitSubSystem(SDL_INIT_TIMER|SDL_INIT_AUDIO| SDL_INIT_VIDEO| SDL_INIT_JOYSTICK|SDL_INIT_NOPARACHUTE)) {
#else
		if (SDL_Init(SDL_INIT_TIMER|SDL_INIT_AUDIO| SDL_INIT_VIDEO| SDL_INIT_JOYSTICK|SDL_INIT_NOPARACHUTE)) {
#endif
			mame_printf_error("Could not initialize SDL %s\n", SDL_GetError());
			exit(-1);
		}
		osd_sdl_info();
	}
	// must be before sdlvideo_init!
	machine.add_notifier(MACHINE_NOTIFY_EXIT, machine_notify_delegate(FUNC(osd_exit), &machine));

	defines_verbose();

	if (!SDLMAME_HAS_DEBUGGER)
		if (machine.debug_flags & DEBUG_FLAG_OSD_ENABLED)
		{
			mame_printf_error("sdlmame: -debug not supported on X11-less builds\n\n");
			osd_exit(machine);
			exit(-1);
		}
//.........這裏部分代碼省略.........
開發者ID:felipesanches，項目名稱:ume，代碼行數:101，代碼來源:sdlmain.c

示例10: video_start

void bsktball_state::video_start()
{
	m_bg_tilemap = &machine().tilemap().create(tilemap_get_info_delegate(FUNC(bsktball_state::get_bg_tile_info),this), TILEMAP_SCAN_ROWS, 8, 8, 32, 32);
}
開發者ID:coinhelper，項目名稱:jsmess，代碼行數:4，代碼來源:bsktball.c

示例11: FUNC

bool Cacheable::validate(Session *s)
{
	FUNC("Cacheable::validate()");
	
	// Return true if the object is already valid
	if (isValid())
		return true;
	
	// Set the mode to first search locally, then search remote
	s->setCacheMode(Session::LOCAL_THEN_REMOTE);
	
	// Construct the match info for this object's issuer
	acl::MatchInfo mi;
	getIssuerInfo(mi);
	
	// Find this object's issuer (clearance cert)
	CCList *pCCList = s->getCC(mi);
	if (pCCList == NULL)
    {
        char lpszBuf[2048];
        strcpy(lpszBuf, "Issuer not found");
        if (mi.getSubjectDN())
        {
            strcat(lpszBuf, ", ");
            strcat(lpszBuf, *mi.getSubjectDN());
        }
		throw ACL_EXCEPT(ACL_AC_VAL_ERROR, lpszBuf);
    }       // END IF pCCList (no issuer(s))
	
	// Create auto_ptr to automatically free the list
	std::auto_ptr<CCList> apCCList(pCCList);
	
	// If more than one issuer is returned, throw an exception
	if (pCCList->size() > 1)
    {
		char errorBuf[1024];
        strcpy(errorBuf, "Multiple issuers found");
        if (mi.getSubjectDN())
        {
            strcat(errorBuf, ", ");
            strcat(errorBuf, *mi.getSubjectDN());
        }
		throw ACL_EXCEPT(ACL_AC_VAL_ERROR, errorBuf);
    }
	
	// Validate the issuer's clearance cert
	CML::ValidatedKey validKey;
    CML::ErrorInfoList Errors;

	CML::CertPath certPath(pCCList->front().getEncodedCC(), false);
	short cml_status = certPath.BuildAndValidate(s->getCMLHandle(),
        CM_SEARCH_UNTIL_FOUND, &Errors, 0, &validKey);
	if (cml_status != CM_NO_ERROR)
	{
		char errorBuf[1024];
		sprintf(errorBuf, "Issuer failed to validate: CML error %d: %s",
			cml_status, CMU_GetErrorString(cml_status));
        if (mi.getSubjectDN())
        {
            strcat(errorBuf, ", ");
            strcat(errorBuf, *mi.getSubjectDN());
        }
		throw ACL_EXCEPT(ACL_VAL_ERROR, errorBuf);
	}
	
	// Perform any object specific path validation logic first
	vPathRules(s, certPath.base());
	
	// Validate the object
	return validate(s, validKey.pubKeyInfo());
}
開發者ID:dcblake，項目名稱:SMP，代碼行數:71，代碼來源:aclcacheable.cpp

示例12: strcat

				if (phoneme == 0x03 || phoneme == 0x3e) strcat(phonemes," ");
				else strcat(phonemes,PhonemeTable[phoneme]);
			}

			mame_printf_debug("Votrax played '%s'\n", phonemes);
			play_sample(samples, phonemes);
#if 0
			popmessage("%s", phonemes);
#endif
		}

		state->m_votrax_queuepos = 0;
	}

	/* generate a NMI after a while to make the CPU continue to send data */
	space->machine().scheduler().timer_set(attotime::from_usec(50), FUNC(gottlieb_nmi_generate));
}

static WRITE8_HANDLER( speech_clock_dac_w )
{
	gottlieb_state *state = space->machine().driver_data<gottlieb_state>();
if (data != state->m_last)
	mame_printf_debug("clock = %02X\n", data);
state->m_last = data;
}


/*************************************
 *
 *  Rev 1. initialization
 *
開發者ID:bdidier，項目名稱:MAME-OS-X，代碼行數:31，代碼來源:gottlieb.c

示例13: map

void konendev_state::konendev_map(address_map &map)
{
	map(0x00000000, 0x00ffffff).ram();
	map(0x78000000, 0x78000003).r(FUNC(konendev_state::mcu2_r));
	map(0x78080000, 0x7808000f).rw(FUNC(konendev_state::rtc_r), FUNC(konendev_state::rtc_w));
	map(0x780c0000, 0x780c0003).rw(FUNC(konendev_state::sound_data_r), FUNC(konendev_state::sound_data_w));
	map(0x78100000, 0x78100003).w(FUNC(konendev_state::eeprom_w));
	map(0x78800000, 0x78800003).r(FUNC(konendev_state::ifu2_r));
	map(0x78800004, 0x78800007).r(FUNC(konendev_state::ctrl0_r));
	map(0x78a00000, 0x78a0001f).r(FUNC(konendev_state::ctrl1_r));
	map(0x78e00000, 0x78e00003).r(FUNC(konendev_state::ctrl2_r));
	map(0x79000000, 0x79000003).w(m_gcu, FUNC(k057714_device::fifo_w));
	map(0x79800000, 0x798000ff).rw(m_gcu, FUNC(k057714_device::read), FUNC(k057714_device::write));
	map(0x7a000000, 0x7a01ffff).ram().share("nvram0");
	map(0x7a100000, 0x7a11ffff).ram().share("nvram1");
	map(0x7e000000, 0x7f7fffff).rom().region("flash", 0);
	map(0x7ff00000, 0x7fffffff).rom().region("program", 0);
}
開發者ID:SailorSat，項目名稱:cabmame，代碼行數:18，代碼來源:konendev.cpp

示例14: map

void v6809_state::v6809_mem(address_map &map)
{
	map.unmap_value_high();
	map(0x0000, 0xefff).ram();
	map(0xf000, 0xf000).mirror(0xfe).r(m_crtc, FUNC(mc6845_device::status_r)).w(FUNC(v6809_state::v6809_address_w));
	map(0xf001, 0xf001).mirror(0xfe).r(m_crtc, FUNC(mc6845_device::register_r)).w(FUNC(v6809_state::v6809_register_w));
	map(0xf200, 0xf200).mirror(0xff).w(FUNC(v6809_state::videoram_w));
	map(0xf500, 0xf501).mirror(0x36).rw("acia0", FUNC(acia6850_device::read), FUNC(acia6850_device::write)); // modem
	map(0xf508, 0xf509).mirror(0x36).rw("acia1", FUNC(acia6850_device::read), FUNC(acia6850_device::write)); // printer
	map(0xf600, 0xf603).mirror(0x3c).rw(m_fdc, FUNC(mb8876_device::read), FUNC(mb8876_device::write));
	map(0xf640, 0xf64f).mirror(0x30).rw("rtc", FUNC(mm58274c_device::read), FUNC(mm58274c_device::write));
	map(0xf680, 0xf683).mirror(0x3c).rw(m_pia0, FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0xf6c0, 0xf6c7).mirror(0x08).rw("ptm", FUNC(ptm6840_device::read), FUNC(ptm6840_device::write));
	map(0xf6d0, 0xf6d3).mirror(0x0c).rw("pia1", FUNC(pia6821_device::read), FUNC(pia6821_device::write));
	map(0xf800, 0xffff).rom();
}
開發者ID:Octocontrabass，項目名稱:mame，代碼行數:16，代碼來源:v6809.cpp

示例15: DRIVER_INIT_MEMBER

DRIVER_INIT_MEMBER(exprraid_state,wexpressb3)
{
	m_maincpu->space(AS_PROGRAM).install_read_handler(0xFFC0, 0xFFC0, read8_delegate(FUNC(exprraid_state::vblank_r),this));
	exprraid_gfx_expand();
}
開發者ID:jiangzhonghui，項目名稱:mame，代碼行數:5，代碼來源:exprraid.c


注：本文中的FUNC函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。