當前位置: 首頁>>代碼示例>>C++>>正文

C++ FSMDEBUG函數代碼示例

本文整理匯總了C++中FSMDEBUG函數的典型用法代碼示例。如果您正苦於以下問題：C++ FSMDEBUG函數的具體用法？C++ FSMDEBUG怎麽用？C++ FSMDEBUG使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。


在下文中一共展示了FSMDEBUG函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: fsm_lowerup

/*
 * fsm_lowerup - The lower layer is up.
 */
void
fsm_lowerup(fsm *f)
{
  int oldState = f->state;

  LWIP_UNUSED_ARG(oldState);

  switch( f->state ) {
    case LS_INITIAL:
      f->state = LS_CLOSED;
      break;

    case LS_STARTING:
      if( f->flags & OPT_SILENT ) {
        f->state = LS_STOPPED;
      } else {
        /* Send an initial configure-request */
        fsm_sconfreq(f, 0);
        f->state = LS_REQSENT;
      }
    break;

    default:
      FSMDEBUG(LOG_INFO, ("%s: Up event in state %d (%s)!\n",
          PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
  }

  FSMDEBUG(LOG_INFO, ("%s: lowerup state %d (%s) -> %d (%s)\n",
      PROTO_NAME(f), oldState, ppperr_strerr[oldState], f->state, ppperr_strerr[f->state]));
}
開發者ID:0x00dec0de，項目名稱:Rovnix，代碼行數:33，代碼來源:fsm.c

示例2: fsm_rtermreq

/*
 * fsm_rtermreq - Receive Terminate-Req.
 */
static void
fsm_rtermreq(fsm *f, int id, u_char *p, int len)
{
  LWIP_UNUSED_ARG(p);

  FSMDEBUG(LOG_INFO, ("fsm_rtermreq(%s): Rcvd id %d state=%d (%s)\n",
        PROTO_NAME(f), id, f->state, ppperr_strerr[f->state]));

  switch (f->state) {
    case LS_ACKRCVD:
    case LS_ACKSENT:
      f->state = LS_REQSENT;    /* Start over but keep trying */
      break;

    case LS_OPENED:
      if (len > 0) {
        FSMDEBUG(LOG_INFO, ("%s terminated by peer (%p)\n", PROTO_NAME(f), p));
      } else {
        FSMDEBUG(LOG_INFO, ("%s terminated by peer\n", PROTO_NAME(f)));
      }
      if (f->callbacks->down) {
        (*f->callbacks->down)(f);  /* Inform upper layers */
      }
      f->retransmits = 0;
      f->state = LS_STOPPING;
      TIMEOUT(fsm_timeout, f, f->timeouttime);
      break;
  }

  fsm_sdata(f, TERMACK, (u_char)id, NULL, 0);
}
開發者ID:0x00dec0de，項目名稱:Rovnix，代碼行數:34，代碼來源:fsm.c

示例3: fsm_timeout

/*
 * fsm_timeout - Timeout expired.
 */
static void
fsm_timeout(void *arg)
{
  fsm *f = (fsm *) arg;

  switch (f->state) {
    case LS_CLOSING:
    case LS_STOPPING:
      if( f->retransmits <= 0 ) {
        FSMDEBUG(LOG_WARNING, ("%s: timeout sending Terminate-Request state=%d (%s)\n",
             PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
        /*
         * We've waited for an ack long enough.  Peer probably heard us.
         */
        f->state = (f->state == LS_CLOSING)? LS_CLOSED: LS_STOPPED;
        if( f->callbacks->finished ) {
          (*f->callbacks->finished)(f);
        }
      } else {
        FSMDEBUG(LOG_WARNING, ("%s: timeout resending Terminate-Requests state=%d (%s)\n",
             PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
        /* Send Terminate-Request */
        fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
            (u_char *) f->term_reason, f->term_reason_len);
        TIMEOUT(fsm_timeout, f, f->timeouttime);
        --f->retransmits;
      }
      break;

    case LS_REQSENT:
    case LS_ACKRCVD:
    case LS_ACKSENT:
      if (f->retransmits <= 0) {
        FSMDEBUG(LOG_WARNING, ("%s: timeout sending Config-Requests state=%d (%s)\n",
         PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
        f->state = LS_STOPPED;
        if( (f->flags & OPT_PASSIVE) == 0 && f->callbacks->finished ) {
          (*f->callbacks->finished)(f);
        }
      } else {
        FSMDEBUG(LOG_WARNING, ("%s: timeout resending Config-Request state=%d (%s)\n",
         PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
        /* Retransmit the configure-request */
        if (f->callbacks->retransmit) {
          (*f->callbacks->retransmit)(f);
        }
        fsm_sconfreq(f, 1);    /* Re-send Configure-Request */
        if( f->state == LS_ACKRCVD ) {
          f->state = LS_REQSENT;
        }
      }
      break;

    default:
      FSMDEBUG(LOG_INFO, ("%s: UNHANDLED timeout event in state %d (%s)!\n",
          PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
  }
}
開發者ID:0x00dec0de，項目名稱:Rovnix，代碼行數:61，代碼來源:fsm.c

示例4: fsm_rconfnakrej

/*
 * fsm_rconfnakrej - Receive Configure-Nak or Configure-Reject.
 */
static void
fsm_rconfnakrej(fsm *f, int code, int id, u_char *inp, int len)
{
  int (*proc) (fsm *, u_char *, int);
  int ret;

  FSMDEBUG(LOG_INFO, ("fsm_rconfnakrej(%s): Rcvd id %d state=%d (%s)\n",
        PROTO_NAME(f), id, f->state, ppperr_strerr[f->state]));

  if (id != f->reqid || f->seen_ack) { /* Expected id? */
    return;        /* Nope, toss... */
  }
  proc = (code == CONFNAK)? f->callbacks->nakci: f->callbacks->rejci;
  if (!proc || !((ret = proc(f, inp, len)))) {
    /* Nak/reject is bad - ignore it */
    FSMDEBUG(LOG_INFO, ("%s: received bad %s (length %d)\n",
          PROTO_NAME(f), (code==CONFNAK? "Nak": "reject"), len));
    return;
  }
  f->seen_ack = 1;

  switch (f->state) {
    case LS_CLOSED:
    case LS_STOPPED:
      fsm_sdata(f, TERMACK, (u_char)id, NULL, 0);
      break;
    
    case LS_REQSENT:
    case LS_ACKSENT:
      /* They didn't agree to what we wanted - try another request */
      UNTIMEOUT(fsm_timeout, f);  /* Cancel timeout */
      if (ret < 0) {
        f->state = LS_STOPPED;    /* kludge for stopping CCP */
      } else {
        fsm_sconfreq(f, 0);    /* Send Configure-Request */
      }
      break;
    
    case LS_ACKRCVD:
      /* Got a Nak/reject when we had already had an Ack?? oh well... */
      UNTIMEOUT(fsm_timeout, f);  /* Cancel timeout */
      fsm_sconfreq(f, 0);
      f->state = LS_REQSENT;
      break;
    
    case LS_OPENED:
      /* Go down and restart negotiation */
      if (f->callbacks->down) {
        (*f->callbacks->down)(f);  /* Inform upper layers */
      }
      fsm_sconfreq(f, 0);    /* Send initial Configure-Request */
      f->state = LS_REQSENT;
      break;
  }
}
開發者ID:0x00dec0de，項目名稱:Rovnix，代碼行數:58，代碼來源:fsm.c

示例5: fsm_rconfack

/*
 * fsm_rconfack - Receive Configure-Ack.
 */
static void
fsm_rconfack(fsm *f, int id, u_char *inp, int len)
{
  FSMDEBUG(LOG_INFO, ("fsm_rconfack(%s): Rcvd id %d state=%d (%s)\n",
        PROTO_NAME(f), id, f->state, ppperr_strerr[f->state]));
  
  if (id != f->reqid || f->seen_ack) {   /* Expected id? */
    return; /* Nope, toss... */
  }
  if( !(f->callbacks->ackci? (*f->callbacks->ackci)(f, inp, len): (len == 0)) ) {
    /* Ack is bad - ignore it */
    FSMDEBUG(LOG_INFO, ("%s: received bad Ack (length %d)\n",
          PROTO_NAME(f), len));
    return;
  }
  f->seen_ack = 1;
  
  switch (f->state) {
    case LS_CLOSED:
    case LS_STOPPED:
      fsm_sdata(f, TERMACK, (u_char)id, NULL, 0);
      break;
    
    case LS_REQSENT:
      f->state = LS_ACKRCVD;
      f->retransmits = f->maxconfreqtransmits;
      break;
    
    case LS_ACKRCVD:
      /* Huh? an extra valid Ack? oh well... */
      UNTIMEOUT(fsm_timeout, f);  /* Cancel timeout */
      fsm_sconfreq(f, 0);
      f->state = LS_REQSENT;
      break;
    
    case LS_ACKSENT:
      UNTIMEOUT(fsm_timeout, f);  /* Cancel timeout */
      f->state = LS_OPENED;
      f->retransmits = f->maxconfreqtransmits;
      if (f->callbacks->up) {
        (*f->callbacks->up)(f);  /* Inform upper layers */
      }
      break;
    
    case LS_OPENED:
      /* Go down and restart negotiation */
      if (f->callbacks->down) {
        (*f->callbacks->down)(f);  /* Inform upper layers */
      }
      fsm_sconfreq(f, 0);    /* Send initial Configure-Request */
      f->state = LS_REQSENT;
      break;
  }
}
開發者ID:0x00dec0de，項目名稱:Rovnix，代碼行數:57，代碼來源:fsm.c

示例6: fsm_rconfack

/*
 * fsm_rconfack - Receive Configure-Ack.
 */
static void
fsm_rconfack(fsm *f, int id, u_char *inp, int len)
{
    FSMDEBUG((LOG_INFO, "fsm_rconfack(%s): Rcvd id %d.",
	      PROTO_NAME(f), id));

    if (id != f->reqid || f->seen_ack)		/* Expected id? */
	return;					/* Nope, toss... */
    if( !(f->callbacks->ackci? (*f->callbacks->ackci)(f, inp, len):
	  (len == 0)) ){
	/* Ack is bad - ignore it */
	log_packet(inp, len, "Received bad configure-ack: ", LOG_ERR);
	FSMDEBUG((LOG_INFO, "%s: received bad Ack (length %d)",
		  PROTO_NAME(f), len));
	return;
    }
    f->seen_ack = 1;

    switch (f->state) {
    case CLOSED:
    case STOPPED:
	fsm_sdata(f, TERMACK, id, NULL, 0);
	break;

    case REQSENT:
	f->state = ACKRCVD;
	f->retransmits = f->maxconfreqtransmits;
	break;

    case ACKRCVD:
	/* Huh? an extra valid Ack? oh well... */
	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
	fsm_sconfreq(f, 0);
	f->state = REQSENT;
	break;

    case ACKSENT:
	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
	f->state = OPENED;
	f->retransmits = f->maxconfreqtransmits;
	if (f->callbacks->up)
	    (*f->callbacks->up)(f);	/* Inform upper layers */
	break;

    case OPENED:
	/* Go down and restart negotiation */
	if (f->callbacks->down)
	    (*f->callbacks->down)(f);	/* Inform upper layers */
	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
	f->state = REQSENT;
	break;
    }
}
開發者ID:AhmadTux，項目名稱:DragonFlyBSD，代碼行數:56，代碼來源:fsm.c

示例7: fsm_protreject

/*
 * fsm_protreject - Peer doesn't speak this protocol.
 *
 * Treat this as a catastrophic error (RXJ-).
 */
void fsm_protreject(fsm *f) {
    switch( f->state ){
    case PPP_FSM_CLOSING:
	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
	/* fall through */
	/* no break */
    case PPP_FSM_CLOSED:
	f->state = PPP_FSM_CLOSED;
	if( f->callbacks->finished )
	    (*f->callbacks->finished)(f);
	break;

    case PPP_FSM_STOPPING:
    case PPP_FSM_REQSENT:
    case PPP_FSM_ACKRCVD:
    case PPP_FSM_ACKSENT:
	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
	/* fall through */
	/* no break */
    case PPP_FSM_STOPPED:
	f->state = PPP_FSM_STOPPED;
	if( f->callbacks->finished )
	    (*f->callbacks->finished)(f);
	break;

    case PPP_FSM_OPENED:
	terminate_layer(f, PPP_FSM_STOPPING);
	break;

    default:
	FSMDEBUG(("%s: Protocol-reject event in state %d!",
		  PROTO_NAME(f), f->state));
	/* no break */
    }
}
開發者ID:MuesliReep，項目名稱:STM-Nucleo-F746ZG-TCP-UDP-example，代碼行數:40，代碼來源:fsm.c

示例8: fsm_rtermack

/*
 * fsm_rtermack - Receive Terminate-Ack.
 */
static void
fsm_rtermack(fsm *f)
{
  FSMDEBUG((LOG_INFO, "fsm_rtermack(%s): state=%d (%s)\n", 
        PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
  
  switch (f->state) {
    case LS_CLOSING:
      UNTIMEOUT(fsm_timeout, f);
      f->state = LS_CLOSED;
      if( f->callbacks->finished ) {
        (*f->callbacks->finished)(f);
      }
      break;

    case LS_STOPPING:
      UNTIMEOUT(fsm_timeout, f);
      f->state = LS_STOPPED;
      if( f->callbacks->finished ) {
        (*f->callbacks->finished)(f);
      }
      break;
    
    case LS_ACKRCVD:
      f->state = LS_REQSENT;
      break;
    
    case LS_OPENED:
      if (f->callbacks->down) {
        (*f->callbacks->down)(f);  /* Inform upper layers */
      }
      fsm_sconfreq(f, 0);
      break;
  }
}
開發者ID:hitubaldaniya，項目名稱:lumweb，代碼行數:38，代碼來源:fsm.c

示例9: fsm_rtermack

/*
 * fsm_rtermack - Receive Terminate-Ack.
 */
static void
fsm_rtermack(fsm *f)
{
    FSMDEBUG((LOG_INFO, "fsm_rtermack(%s).", PROTO_NAME(f)));

    switch (f->state) {
    case CLOSING:
	UNTIMEOUT(fsm_timeout, f);
	f->state = CLOSED;
	if( f->callbacks->finished )
	    (*f->callbacks->finished)(f);
	break;
    case STOPPING:
	UNTIMEOUT(fsm_timeout, f);
	f->state = STOPPED;
	if( f->callbacks->finished )
	    (*f->callbacks->finished)(f);
	break;

    case ACKRCVD:
	f->state = REQSENT;
	break;

    case OPENED:
	if (f->callbacks->down)
	    (*f->callbacks->down)(f);	/* Inform upper layers */
	fsm_sconfreq(f, 0);
	break;
    }
}
開發者ID:AhmadTux，項目名稱:DragonFlyBSD，代碼行數:33，代碼來源:fsm.c

示例10: fsm_rtermreq

/*
 * fsm_rtermreq - Receive Terminate-Req.
 */
static void
fsm_rtermreq(fsm *f, int id, u_char *p, int len)
{
    char str[80];

    FSMDEBUG((LOG_INFO, "fsm_rtermreq(%s): Rcvd id %d.",
	      PROTO_NAME(f), id));

    switch (f->state) {
    case ACKRCVD:
    case ACKSENT:
	f->state = REQSENT;		/* Start over but keep trying */
	break;

    case OPENED:
	if (len > 0) {
	    fmtmsg(str, sizeof(str), "%0.*v", len, p);
	    syslog(LOG_INFO, "%s terminated by peer (%s)", PROTO_NAME(f), str);
	} else
	    syslog(LOG_INFO, "%s terminated by peer", PROTO_NAME(f));
	if (f->callbacks->down)
	    (*f->callbacks->down)(f);	/* Inform upper layers */
	f->retransmits = 0;
	f->state = STOPPING;
	TIMEOUT(fsm_timeout, f, f->timeouttime);
	break;
    }

    fsm_sdata(f, TERMACK, id, NULL, 0);
}
開發者ID:AhmadTux，項目名稱:DragonFlyBSD，代碼行數:33，代碼來源:fsm.c

示例11: fsm_lowerdown

/*
 * fsm_lowerdown - The lower layer is down.
 *
 * Cancel all timeouts and inform upper layers.
 */
void
fsm_lowerdown(fsm *f)
{
  int oldState = f->state;

  LWIP_UNUSED_ARG(oldState);

  switch( f->state ) {
    case LS_CLOSED:
      f->state = LS_INITIAL;
      break;

    case LS_STOPPED:
      f->state = LS_STARTING;
      if( f->callbacks->starting ) {
        (*f->callbacks->starting)(f);
      }
      break;

    case LS_CLOSING:
      f->state = LS_INITIAL;
      UNTIMEOUT(fsm_timeout, f);  /* Cancel timeout */
      break;

    case LS_STOPPING:
    case LS_REQSENT:
    case LS_ACKRCVD:
    case LS_ACKSENT:
      f->state = LS_STARTING;
      UNTIMEOUT(fsm_timeout, f);  /* Cancel timeout */
      break;

    case LS_OPENED:
      if( f->callbacks->down ) {
        (*f->callbacks->down)(f);
      }
      f->state = LS_STARTING;
      break;

    default:
      FSMDEBUG(LOG_INFO, ("%s: Down event in state %d (%s)!\n",
          PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
  }

  FSMDEBUG(LOG_INFO, ("%s: lowerdown state %d (%s) -> %d (%s)\n",
      PROTO_NAME(f), oldState, ppperr_strerr[oldState], f->state, ppperr_strerr[f->state]));
}
開發者ID:0x00dec0de，項目名稱:Rovnix，代碼行數:52，代碼來源:fsm.c

示例12: fsm_rcoderej

/*
 * fsm_rcoderej - Receive an Code-Reject.
 */
static void
fsm_rcoderej(fsm *f, u_char *inp, int len)
{
    u_char code, id;

    FSMDEBUG((LOG_INFO, "fsm_rcoderej(%s).", PROTO_NAME(f)));

    if (len < HEADERLEN) {
	FSMDEBUG((LOG_INFO, "fsm_rcoderej: Rcvd short Code-Reject packet!"));
	return;
    }
    GETCHAR(code, inp);
    GETCHAR(id, inp);
    syslog(LOG_WARNING, "%s: Rcvd Code-Reject for code %d, id %d",
	   PROTO_NAME(f), code, id);

    if( f->state == ACKRCVD )
	f->state = REQSENT;
}
開發者ID:AhmadTux，項目名稱:DragonFlyBSD，代碼行數:22，代碼來源:fsm.c

示例13: fsm_rcoderej

/*
 * fsm_rcoderej - Receive an Code-Reject.
 */
static void
fsm_rcoderej(fsm *f, u_char *inp, int len)
{
  u_char code, id;
  
  FSMDEBUG(LOG_INFO, ("fsm_rcoderej(%s): state=%d (%s)\n", 
        PROTO_NAME(f), f->state, ppperr_strerr[f->state]));
  
  if (len < HEADERLEN) {
    FSMDEBUG(LOG_INFO, ("fsm_rcoderej: Rcvd short Code-Reject packet!\n"));
    return;
  }
  GETCHAR(code, inp);
  GETCHAR(id, inp);
  FSMDEBUG(LOG_WARNING, ("%s: Rcvd Code-Reject for code %d, id %d\n",
        PROTO_NAME(f), code, id));
  
  if( f->state == LS_ACKRCVD ) {
    f->state = LS_REQSENT;
  }
}
開發者ID:0x00dec0de，項目名稱:Rovnix，代碼行數:24，代碼來源:fsm.c

示例14: fsm_rcoderej

/*
 * fsm_rcoderej - Receive an Code-Reject.
 */
static void fsm_rcoderej(fsm *f, u_char *inp, int len) {
    u_char code, id;

    if (len < HEADERLEN) {
	FSMDEBUG(("fsm_rcoderej: Rcvd short Code-Reject packet!"));
	return;
    }
    GETCHAR(code, inp);
    GETCHAR(id, inp);
    ppp_warn("%s: Rcvd Code-Reject for code %d, id %d", PROTO_NAME(f), code, id);

    if( f->state == PPP_FSM_ACKRCVD )
	f->state = PPP_FSM_REQSENT;
}
開發者ID:MuesliReep，項目名稱:STM-Nucleo-F746ZG-TCP-UDP-example，代碼行數:17，代碼來源:fsm.c

示例15: fsm_timeout

/*
 * fsm_timeout - Timeout expired.
 */
static void
fsm_timeout(void *arg)
{
    fsm *f = (fsm *) arg;

    switch (f->state) {
    case CLOSING:
    case STOPPING:
	if( f->retransmits <= 0 ){
	    /*
	     * We've waited for an ack long enough.  Peer probably heard us.
	     */
	    f->state = (f->state == CLOSING)? CLOSED: STOPPED;
	    if( f->callbacks->finished )
		(*f->callbacks->finished)(f);
	} else {
	    /* Send Terminate-Request */
	    fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
		      (u_char *) f->term_reason, f->term_reason_len);
	    TIMEOUT(fsm_timeout, f, f->timeouttime);
	    --f->retransmits;
	}
	break;

    case REQSENT:
    case ACKRCVD:
    case ACKSENT:
	if (f->retransmits <= 0) {
	    syslog(LOG_WARNING, "%s: timeout sending Config-Requests",
		   PROTO_NAME(f));
	    f->state = STOPPED;
	    if( (f->flags & OPT_PASSIVE) == 0 && f->callbacks->finished )
		(*f->callbacks->finished)(f);

	} else {
	    /* Retransmit the configure-request */
	    if (f->callbacks->retransmit)
		(*f->callbacks->retransmit)(f);
	    fsm_sconfreq(f, 1);		/* Re-send Configure-Request */
	    if( f->state == ACKRCVD )
		f->state = REQSENT;
	}
	break;

    default:
	FSMDEBUG((LOG_INFO, "%s: Timeout event in state %d!",
		  PROTO_NAME(f), f->state));
    }
}
開發者ID:AhmadTux，項目名稱:DragonFlyBSD，代碼行數:52，代碼來源:fsm.c


注：本文中的FSMDEBUG函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。