當前位置: 首頁>>代碼示例>>C++>>正文

C++ EMD_MSG_INF函數代碼示例

本文整理匯總了C++中EMD_MSG_INF函數的典型用法代碼示例。如果您正苦於以下問題：C++ EMD_MSG_INF函數的具體用法？C++ EMD_MSG_INF怎麽用？C++ EMD_MSG_INF使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。


在下文中一共展示了EMD_MSG_INF函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: client_init

static int client_init(emd_dev_client_t *client, int major,int sub_id)
{
    int ret = 0;
    if( (sub_id >= EMD_CHR_CLIENT_NUM) || (sub_id < 0) ){
        EMD_MSG_INF("chr","client_init:sub_id(%d) error\n",sub_id);
        return -1;
    }

    // 1. Clear client
    memset(client, 0, sizeof(emd_dev_client_t));

    // 2. Setting device id
    client->major_dev_id = major;
    client->sub_dev_id = sub_id;

    // 3. Init wait queue head, wake lock, spin loc and semaphore
    init_waitqueue_head(&client->wait_q);

    spin_lock_init(&client->lock);
    mutex_init(&client->emd_mutex);

    // 4. Set user_num to zero
    client->user_num = 0;

    // 5. Alloc and init kfifo
    ret=kfifo_alloc(&client->fifo, EMD_MAX_MESSAGE_NUM*sizeof(int),GFP_ATOMIC);
    if (ret){
        EMD_MSG_INF("chr","kfifo alloc failed(ret=%d).\n",ret);

        return ret;
    }
    EMD_MSG_INF("chr","client_init:sub_id=%d\n",client->sub_dev_id); 

    return 0;
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:35，代碼來源:emd_ctl_chr.c

示例2: emd_reset_register

// emd_reset_register: register a user for emd reset
// @name: user name
// return a handle if success; return negative value if failure
int emd_reset_register(char *name)
{
    int handle;
    if (name == NULL) {
        EMD_MSG_INF("chr","[Error]emd_reset_register name=null\n");
        return -1;
    }
    mutex_lock(&emd_reset_mutex);
    for (handle = 0; handle < NR_EMD_RESET_USER; handle++) {
        if (emd_reset_sta[handle].is_allocate == 0) {
            emd_reset_sta[handle].is_allocate = 1;
            break;
        }
    }
    if (handle < NR_EMD_RESET_USER) {
        emd_reset_sta[handle].is_reset = 0;
        mutex_unlock(&emd_reset_mutex);
        snprintf(emd_reset_sta[handle].name,EMD_RESET_USER_NAME_SIZE,name);
        EMD_MSG_INF("chr","Register a reset handle by %s(%d)\n", current->comm, handle);
        return handle;
    } 
    else 
    {
        EMD_MSG_INF("chr","[Error]no reset handler\n");
        mutex_unlock(&emd_reset_mutex);
        return -1;
    }
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:31，代碼來源:emd_ctl_chr.c

示例3: get_eint_info

int get_eint_info(const char *name, eint_inf_t *eint_item)
{
#ifdef CONFIG_OF
    struct device_node *node;
    char buf[64];
    int  ints[2];

    if ((NULL==name) || (NULL==eint_item)) {
        EMD_MSG_INF("chr","%s: get invalid arguments:%p,%p\n", __func__, name, eint_item);
        return -1;
    }

    snprintf(buf, 64, "mediatek, %s-eint", name);
    EMD_MSG_INF("chr","%s: find:%s\n", __func__, buf);
    node = of_find_compatible_node(NULL, NULL, buf);
    if (node) {
        of_property_read_u32_array(node, "debounce", ints, ARRAY_SIZE(ints));
        eint_item->gpio_id = ints[0];
        eint_item->debounce_time = ints[1];
        eint_item->irq_id = irq_of_parse_and_map(node, 0);
    } else {
        EMD_MSG_INF("chr","%s: can't find %s\n", __func__, name);
        return -2;
    }

#endif
    return 0;
}
開發者ID:Elnter，項目名稱:j608_kernel，代碼行數:28，代碼來源:ext_md_custom.c

示例4: emd_dev_open

/******************************************************************************************
 *   Driver functions region
 ******************************************************************************************/ 
static int emd_dev_open(struct inode *inode, struct file *file)
{
    int index=iminor(inode);
    int ret=0;

    EMD_MSG_INF("chr","Open by %s sub_id:%d\n",current->comm,index);

    if( (index >= EMD_CHR_CLIENT_NUM) || (index < 0) ){
        EMD_MSG_INF("chr","Open func get invalid dev sub id\n");
        return -1;
    }

    mutex_lock(&drv_client[index].emd_mutex);
    if(drv_client[index].user_num > 0){
        EMD_MSG_INF("chr","Multi-Open not support!\n");
        mutex_unlock(&drv_client[index].emd_mutex);
        return -1;
    }
    drv_client[index].user_num++;
    mutex_unlock(&drv_client[index].emd_mutex);

    file->private_data=&drv_client[index];    
    nonseekable_open(inode,file);
    return ret;
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:28，代碼來源:emd_ctl_chr.c

示例5: cm_do_md_power_off

int cm_do_md_power_off(void)
{
    EMD_MSG_INF("chr","cm_do_md_power_off\n");
    atomic_set(&traffic_on, 0);
    atomic_set(&allow_wk_md, 0);
    // Release download key to let md can enter normal boot
    mt_set_gpio_dir(GPIO_EXT_MD_DL_KEY, 1);
#ifdef GPIO_EXT_USB_SW2
    mt_set_gpio_out(GPIO_EXT_MD_DL_KEY, 0);//set evb 
#else
    mt_set_gpio_out(GPIO_EXT_MD_DL_KEY, 1);//set phone
#endif
    
    cm_disable_ext_md_wdt_irq();
    cm_disable_ext_md_wakeup_irq();
    cm_disable_ext_md_exp_irq();      
    mt_set_gpio_dir(GPIO_EXT_AP_WK_MD, 1);
    mt_set_gpio_out(GPIO_EXT_AP_WK_MD, 0);    
#ifndef  GPIO_EXT_USB_SW2     
    mt_set_gpio_dir(GPIO_EXT_MD_META, 1);    
    mt_set_gpio_out(GPIO_EXT_MD_META, 0);
#endif 
    mt_set_gpio_out(GPIO_EXT_MD_PWR_KEY, 0);
    //EMD_MSG_INF("chr","cm_do_md_power_off:GPIO_EXT_MD_PWR_KEY(%d)2\n",mt_get_gpio_out(GPIO_EXT_MD_PWR_KEY));

    mt_set_gpio_dir(GPIO_EXT_MD_WK_AP, 0);
    mt_set_gpio_pull_enable(GPIO_EXT_MD_WK_AP, 1);
    mt_set_gpio_pull_select(GPIO_EXT_MD_WK_AP, 0);
    mt_set_gpio_dir(GPIO_EXT_MD_EXP, 0);
    mt_set_gpio_pull_enable(GPIO_EXT_MD_EXP, 1);
    mt_set_gpio_pull_select(GPIO_EXT_MD_EXP, 0);
    
    mt_set_gpio_dir(GPIO_EXT_MD_DUMP, 0);
    mt_set_gpio_pull_enable(GPIO_EXT_MD_DUMP, 1);
    mt_set_gpio_pull_select(GPIO_EXT_MD_DUMP, 0);
    
    //For low power, we switch UART GPIO when power off md
    mt_set_gpio_mode(GPIO_UART_URXD1_PIN, 0);
    mt_set_gpio_mode(GPIO_UART_UTXD1_PIN, 0);
    mt_set_gpio_mode(GPIO_UART_URTS1_PIN, 0);
    mt_set_gpio_mode(GPIO_UART_UCTS1_PIN, 0);
    mt_set_gpio_dir(GPIO_UART_URXD1_PIN, 0);
    mt_set_gpio_pull_enable(GPIO_UART_URXD1_PIN, 1);
    mt_set_gpio_pull_select(GPIO_UART_URXD1_PIN, 0);
    mt_set_gpio_dir(GPIO_UART_UTXD1_PIN, 0);
    mt_set_gpio_pull_enable(GPIO_UART_UTXD1_PIN, 1);
    mt_set_gpio_pull_select(GPIO_UART_UTXD1_PIN, 0);
    mt_set_gpio_dir(GPIO_UART_URTS1_PIN, 0);
    mt_set_gpio_pull_enable(GPIO_UART_URTS1_PIN, 1);
    mt_set_gpio_pull_select(GPIO_UART_URTS1_PIN, 0);
    mt_set_gpio_dir(GPIO_UART_UCTS1_PIN, 0);
    mt_set_gpio_pull_enable(GPIO_UART_UCTS1_PIN, 1);
    mt_set_gpio_pull_select(GPIO_UART_UCTS1_PIN, 0);
    
    EMD_MSG_INF("chr","uart gpio pull down\n");
    
    cm_dump_gpio();
    return 0;
}
開發者ID:Elnter，項目名稱:j608_kernel，代碼行數:59，代碼來源:ext_md_custom.c

示例6: cm_gpio_setup

void cm_gpio_setup(void)
{
    EMD_MSG_INF("chr","cm_gpio_setup 1\n");
    atomic_set(&traffic_on, 0);
    atomic_set(&allow_wk_md, 0);
    // MD wake up AP pin
    mt_set_gpio_pull_enable(GPIO_EXT_MD_WK_AP, 1);
    mt_set_gpio_pull_select(GPIO_EXT_MD_WK_AP, 0);
    mt_set_gpio_dir(GPIO_EXT_MD_WK_AP, 0);
    mt_set_gpio_mode(GPIO_EXT_MD_WK_AP, GPIO_EXT_MD_WK_AP_M_EINT); 
    EMD_MSG_INF("chr","cm_gpio_setup:GPIO_EXT_MD_WK_AP(%x)=%d\n",GPIO_EXT_MD_WK_AP,mt_get_gpio_out(GPIO_EXT_MD_WK_AP));
    // AP wake up MD pin
    mt_set_gpio_mode(GPIO_EXT_AP_WK_MD, GPIO_EXT_AP_WK_MD_M_GPIO); // GPIO Mode
    mt_set_gpio_dir(GPIO_EXT_AP_WK_MD, 1);
    mt_set_gpio_out(GPIO_EXT_AP_WK_MD, 0);
	EMD_MSG_INF("chr","cm_gpio_setup:GPIO_EXT_AP_WK_MD(%x)=%d\n",GPIO_EXT_AP_WK_MD,mt_get_gpio_out(GPIO_EXT_AP_WK_MD));
    // Rest MD pin
    mt_set_gpio_mode(GPIO_EXT_MD_RST, GPIO_EXT_MD_RST_M_GPIO); //GPIO202 is reset pin
    mt_set_gpio_pull_enable(GPIO_EXT_MD_RST, 0);
    mt_set_gpio_pull_select(GPIO_EXT_MD_RST, 1);
    cm_relese_rst_signal();
    EMD_MSG_INF("chr","cm_gpio_setup 4\n");
	EMD_MSG_INF("chr","cm_gpio_setup:GPIO_EXT_MD_RST(%x)=%d\n",GPIO_EXT_MD_RST,mt_get_gpio_out(GPIO_EXT_MD_RST));
    // MD power key pin
    mt_set_gpio_mode(GPIO_EXT_MD_PWR_KEY, GPIO_EXT_MD_PWR_KEY_M_GPIO); //GPIO 200 is power key
    mt_set_gpio_pull_enable(GPIO_EXT_MD_PWR_KEY, 0);
    mt_set_gpio_dir(GPIO_EXT_MD_PWR_KEY, 1);
    mt_set_gpio_out(GPIO_EXT_MD_PWR_KEY, 0);
	EMD_MSG_INF("chr","cm_gpio_setup:GPIO_EXT_MD_PWR_KEY(%x)=%d\n",GPIO_EXT_MD_PWR_KEY,mt_get_gpio_out(GPIO_EXT_MD_PWR_KEY));
    // MD WDT irq pin
    mt_set_gpio_pull_enable(GPIO_EXT_MD_WD, 1);
    mt_set_gpio_pull_select(GPIO_EXT_MD_WD, 1);
    mt_set_gpio_dir(GPIO_EXT_MD_WD, 0);
    mt_set_gpio_mode(GPIO_EXT_MD_WD, GPIO_EXT_MD_WD_M_EINT); // EINT168
    EMD_MSG_INF("chr","cm_gpio_setup GPIO_EXT_MD_WD(%x)(in)=%d\n",GPIO_EXT_MD_WD,mt_get_gpio_in(GPIO_EXT_MD_WD));

    // MD Exception irq pin
    mt_set_gpio_pull_enable(GPIO_EXT_MD_EXP, 1);
    mt_set_gpio_pull_select(GPIO_EXT_MD_EXP, 1);
    mt_set_gpio_dir(GPIO_EXT_MD_EXP, 0);
    mt_set_gpio_mode(GPIO_EXT_MD_EXP, GPIO_EXT_MD_EXP_M_EINT); //     
    EMD_MSG_INF("chr","cm_gpio_setup GPIO_EXT_MD_EXP(%x)(in)=%d\n",GPIO_EXT_MD_EXP,mt_get_gpio_in(GPIO_EXT_MD_EXP));
#ifndef  GPIO_EXT_USB_SW2     
    mt_set_gpio_mode(GPIO_EXT_MD_META, GPIO_EXT_MD_META_M_GPIO); 
    mt_set_gpio_dir(GPIO_EXT_MD_META, 1);// Using input floating    
    mt_set_gpio_out(GPIO_EXT_MD_META, 0);// Default @ reset state
    EMD_MSG_INF("chr","cm_gpio_setup:phone GPIO_EXT_MD_META(%x)=%d\n",GPIO_EXT_MD_META,mt_get_gpio_out(GPIO_EXT_MD_META));
#else
    mt_set_gpio_pull_enable(GPIO_EXT_MD_DUMP, 1);
    mt_set_gpio_pull_select(GPIO_EXT_MD_DUMP, 0); 
    mt_set_gpio_dir(GPIO_EXT_MD_DUMP, 1);  
    mt_set_gpio_mode(GPIO_EXT_MD_DUMP, GPIO_EXT_MD_DUMP_M_GPIO);
    EMD_MSG_INF("chr","cm_gpio_setup:evb GPIO_EXT_MD_DUMP(%x)(in)=(%d)\n",GPIO_EXT_MD_DUMP,mt_get_gpio_in(GPIO_EXT_MD_DUMP));
#endif

    // Configure eint
    eint_var_init();
}
開發者ID:Elnter，項目名稱:j608_kernel，代碼行數:58，代碼來源:ext_md_custom.c

示例7: cm_release_wakeup_md_signal

void cm_release_wakeup_md_signal(void)
{    
	if(atomic_read(&allow_wk_md)) {
		mt_set_gpio_out(GPIO_EXT_AP_WK_MD, 1);
		EMD_MSG_INF("chr","cm_release_wakeup_md_signal:GPIO_EXT_AP_WK_MD=%d,1!\n",mt_get_gpio_out(GPIO_EXT_AP_WK_MD));	
	} else {
		EMD_MSG_INF("chr","cm_release_wakeup_md_signal:GPIO_EXT_AP_WK_MD=%d,ignore!\n",mt_get_gpio_out(GPIO_EXT_AP_WK_MD));
	}
}
開發者ID:Elnter，項目名稱:j608_kernel，代碼行數:9，代碼來源:ext_md_custom.c

示例8: cm_dump_gpio

void cm_dump_gpio(void)
{
	unsigned int pin =0;
	pin=GPIO_EXT_MD_DL_KEY;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_DL_KEY: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));  
  pin=GPIO_EXT_MD_PWR_KEY;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_PWR_KEY: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));
	pin=GPIO_EXT_MD_RST;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_RST: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));
  pin=GPIO_EXT_MD_WD;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_WD: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));
  pin=GPIO_EXT_MD_WK_AP;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_WK_AP: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));	
  pin=GPIO_EXT_AP_WK_MD;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_AP_WK_MD: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));		
  pin=GPIO_EXT_MD_EXP;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_EXP: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));			
  pin=GPIO_EXT_MD_DUMP;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_DUMP: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));
#ifndef  GPIO_EXT_USB_SW2
  pin=GPIO_EXT_MD_META;
	EMD_MSG_INF("chr","cm_dump_gpio:GPIO_EXT_MD_META: dir(%d) in(%d),out(%d)\n", \
		mt_get_gpio_dir(pin), mt_get_gpio_in(pin), mt_get_gpio_out(pin));
#endif
}
開發者ID:Elnter，項目名稱:j608_kernel，代碼行數:33，代碼來源:ext_md_custom.c

示例9: emd_user_ready_to_reset

// ccci_user_ready_to_reset: ready to reset and request to reset md
// @handle: a user handle gotten from ccci_reset_register()
// return 0 if emd is reset; return negative value for failure
int emd_user_ready_to_reset(int handle)
{
    int i,ret;
    int reset_ready = 1;
    if( 0==atomic_read(&rst_on_going) ){
        EMD_MSG_INF("chr", "Ignore reset request\n");
        mutex_lock(&emd_reset_mutex);
        emd_reset_sta[handle].is_allocate = 0;
        emd_reset_sta[handle].is_reset = 0;
        mutex_unlock(&emd_reset_mutex);
        return 0;
    }
    if (handle >= NR_EMD_RESET_USER) {
        EMD_MSG_INF("chr", "reset_request: invalid handle:%d \n", handle);
        return -1;
    }

    if (emd_reset_sta[handle].is_allocate == 0) {
        EMD_MSG_INF("chr", "reset_request: handle(%d) not alloc: alloc=%d \n", 
                handle, emd_reset_sta[handle].is_allocate);
        return -1;
    } 
    EMD_MSG_INF("chr", "%s (%d) call reset request \n",current->comm, handle);

    mutex_lock(&emd_reset_mutex);
    emd_reset_sta[handle].is_allocate = 0;
    emd_reset_sta[handle].is_reset = 1;
    EMD_MSG_INF("chr", "Dump not ready list++++\n");
    for (i = 0; i < NR_EMD_RESET_USER; i++) {
        if (emd_reset_sta[i].is_allocate && (emd_reset_sta[i].is_reset == 0)) {
            reset_ready = 0;
            EMD_MSG_INF("chr", " ==> %s\n", emd_reset_sta[i].name);
        }
    }
    EMD_MSG_INF("chr", "Dump not ready list----\n");
    mutex_unlock(&emd_reset_mutex);

    if (reset_ready == 0) 
        return -1;

    // All service ready, send reset request
    EMD_MSG_INF("chr", "Reset MD by %s(%d) \n", current->comm, handle);
    if(emd_status != EMD_STATE_NOT_READY)
    {        
        emd_power_off();
    }
    msleep(EMD_RST_LOW_TIME);
    check_drv_rdy_to_rst();
    EMD_MSG_INF("chr","send wait done message\n");
    ret = send_message_to_user(&drv_client[0], EMD_MSG_WAIT_DONE);
    if( ret!=0 )
    EMD_MSG_INF("chr","send wait done message fail\n");

    return 0;
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:58，代碼來源:emd_ctl_chr.c

示例10: cm_hold_rst_signal

void cm_hold_rst_signal(void)
{
    EMD_MSG_INF("chr","cm_hold_rst_signal1:GPIO_EXT_MD_RST(%d)\n",mt_get_gpio_out(GPIO_EXT_MD_RST));
    mt_set_gpio_dir(GPIO_EXT_MD_RST, 1);
#ifdef GPIO_EXT_USB_SW2
    mt_set_gpio_out(GPIO_EXT_MD_RST, 0);
    EMD_MSG_INF("chr","cm_hold_rst_signal2:set evb GPIO_EXT_MD_RST(out)=%d!\n",mt_get_gpio_out(GPIO_EXT_MD_RST));
#else
    mt_set_gpio_out(GPIO_EXT_MD_RST, 1);
    EMD_MSG_INF("chr","cm_hold_rst_signal2:set phone GPIO_EXT_MD_RST(out)=%d!\n",mt_get_gpio_out(GPIO_EXT_MD_RST));
#endif
}
開發者ID:Elnter，項目名稱:j608_kernel，代碼行數:12，代碼來源:ext_md_custom.c

示例11: emd_ctl_drv_suspend

static int emd_ctl_drv_suspend(struct platform_device *dev, pm_message_t state)
{
    EMD_MSG_INF("chr","client:%d suspend!!\n", dev->id);
    if( (dev->id < 0)||(dev->id >= EMD_CHR_CLIENT_NUM) )
        EMD_MSG_INF("chr","invalid id%d!!\n", dev->id);
    else{
        if(0 == dev->id){
            emd_spm_suspend(emd_status==EMD_STATE_NOT_READY);
        }
    }
    return 0;
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:12，代碼來源:emd_ctl_chr.c

示例12: emd_ctl_drv_resume

static int emd_ctl_drv_resume(struct platform_device *dev)
{
    EMD_MSG_INF("chr","client:%d resume!!\n", dev->id);
    if( (dev->id < 0)||(dev->id >= EMD_CHR_CLIENT_NUM) )
        EMD_MSG_INF("chr","invalid id%d!!\n", dev->id);
    else{
        if(0 == dev->id){
            emd_spm_resume();
        }
    }

    return 0;
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:13，代碼來源:emd_ctl_chr.c

示例13: emd_send_enter_flight_mode

static int emd_send_enter_flight_mode(void)
{
    int ret=0;
    if(emd_status!=EMD_STATE_READY)
    {
        EMD_MSG_INF("chr","emd_send_enter_flight_mode:ext md not ready!\n");
        return -ENODEV;
    }
    EMD_MSG_INF("chr","emd_send_enter_flight_mode\n");
    emd_power_off();
    send_message_to_user(&drv_client[0], EMD_MSG_ENTER_FLIGHT_MODE);
    return ret;
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:13，代碼來源:emd_ctl_chr.c

示例14: push_data

static int push_data(emd_dev_client_t *client, int data)
{
    int size, ret;
    if(kfifo_is_full(&client->fifo)){
        ret=-ENOMEM;
        EMD_MSG_INF("chr","sub_dev%d kfifo full\n",client->sub_dev_id);
    }else{
        EMD_MSG_INF("chr","push data=0x%08x into sub_dev%d kfifo\n",data,client->sub_dev_id);
        size=kfifo_in(&client->fifo,&data,sizeof(int));
        WARN_ON(size!=sizeof(int));
        ret=sizeof(int);
    }
    return ret;
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:14，代碼來源:emd_ctl_chr.c

示例15: emd_aseert_log_work_func

static void emd_aseert_log_work_func(struct work_struct *data)
{
#if defined (CONFIG_MTK_AEE_FEATURE)
    char log[]="ExtMD exception\nMD:G*MT6261_S01*11C.unknown*0000/00/00 00:00\nAP:WG*MT6595_S00\n(MD)Debug";
    EMD_MSG_INF("chr","Ext MD exception,%s\n",log);
    emd_aseert_log_wait_timeout = 1;
    wake_up_interruptible(&emd_aseert_log_wait);
    aed_md_exception((int *)log, sizeof(log), (int *)log, sizeof(log), log);
#else
    EMD_MSG_INF("chr","Ext MD ASSERT -> RESET\n");
    emd_aseert_log_wait_timeout = 1;
    wake_up_interruptible(&emd_aseert_log_wait);
    emd_request_reset();    
#endif    
}
開發者ID:SelfImp，項目名稱:m75，代碼行數:15，代碼來源:emd_ctl_chr.c


注：本文中的EMD_MSG_INF函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。