C++ DoorOpen函數代碼示例

本文整理匯總了C++中DoorOpen函數的典型用法代碼示例。如果您正苦於以下問題：C++ DoorOpen函數的具體用法？C++ DoorOpen怎麽用？C++ DoorOpen使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了DoorOpen函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: SpawnBGObject

void BattlegroundAB::StartingEventOpenDoors()
{
    // spawn neutral banners
    for (int banner = BG_AB_OBJECT_BANNER_NEUTRAL, i = 0; i < 5; banner += 8, ++i)
        SpawnBGObject(banner, RESPAWN_IMMEDIATELY);
    for (int i = 0; i < BG_AB_DYNAMIC_NODES_COUNT; ++i)
    {
        //randomly select buff to spawn
        uint8 buff = urand(0, 2);
        SpawnBGObject(BG_AB_OBJECT_SPEEDBUFF_STABLES + buff + i * 3, RESPAWN_IMMEDIATELY);
    }
    DoorOpen(BG_AB_OBJECT_GATE_A);
    DoorOpen(BG_AB_OBJECT_GATE_H);

    // Achievement: Let's Get This Done
    StartTimedAchievement(ACHIEVEMENT_TIMED_TYPE_EVENT, AB_EVENT_START_BATTLE);
}

開發者ID:redlaine，項目名稱:TrinityCore，代碼行數:17，代碼來源:BattlegroundAB.cpp

示例2: DoorOpen

void BattlegroundNA::StartingEventOpenDoors()
{
    for (uint32 i = BG_NA_OBJECT_DOOR_1; i <= BG_NA_OBJECT_DOOR_2; ++i)
        DoorOpen(i);

    for (uint32 i = BG_NA_OBJECT_BUFF_1; i <= BG_NA_OBJECT_BUFF_2; ++i)
        SpawnBGObject(i, 60);
}

開發者ID:Cryostorm，項目名稱:SunwellCore，代碼行數:8，代碼來源:BattlegroundNA.cpp

示例3: DoorOpen

void BattlegroundWS::StartingEventOpenDoors()
{
    for (uint32 i = BG_WS_OBJECT_DOOR_A_1; i <= BG_WS_OBJECT_DOOR_A_6; ++i)
        DoorOpen(i);
    for (uint32 i = BG_WS_OBJECT_DOOR_H_1; i <= BG_WS_OBJECT_DOOR_H_4; ++i)
        DoorOpen(i);

    for (uint32 i = BG_WS_OBJECT_A_FLAG; i <= BG_WS_OBJECT_BERSERKBUFF_2; ++i)
        SpawnBGObject(i, RESPAWN_IMMEDIATELY);

    SpawnBGObject(BG_WS_OBJECT_DOOR_A_5, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_WS_OBJECT_DOOR_A_6, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_WS_OBJECT_DOOR_H_3, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_WS_OBJECT_DOOR_H_4, RESPAWN_ONE_DAY);

    // players joining later are not eligibles
}

開發者ID:aikon-com-cn，項目名稱:Infinity-Core，代碼行數:17，代碼來源:BattlegroundWS.cpp

示例4: switch

void BattlegroundRV::PostUpdateImpl(uint32 diff)
{
    if(GetStatus() != STATUS_IN_PROGRESS)
        return;

    if (getTimer() < diff)
    {
        switch (getState())
        {
        case BG_RV_STATE_OPEN_FENCES:
            setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
            setState(BG_RV_STATE_CLOSE_FIRE);
            break;
        case BG_RV_STATE_CLOSE_FIRE:
            for (uint8 i = BG_RV_OBJECT_FIRE_1; i <= BG_RV_OBJECT_FIREDOOR_2; ++i)
                DoorClose(i);
            setTimer(BG_RV_FIRE_TO_PILAR_TIMER);
            setState(BG_RV_STATE_OPEN_PILARS);
            break;
        case BG_RV_STATE_OPEN_PILARS:
            for (uint8 i = BG_RV_OBJECT_PILAR_1; i <= BG_RV_OBJECT_PULLEY_2; ++i)
                DoorOpen(i);
            setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
            setState(BG_RV_STATE_OPEN_FIRE);
            SwitchDynLos();
            break;
        case BG_RV_STATE_OPEN_FIRE:
            // FIXME: after 3.2.0 it's only decorative and should be opened only one time at battle start
            for (uint8 i = BG_RV_OBJECT_FIRE_1; i <= BG_RV_OBJECT_FIREDOOR_2; ++i)
                DoorOpen(i);
            setTimer(BG_RV_FIRE_TO_PILAR_TIMER);
            setState(BG_RV_STATE_CLOSE_PILARS);
            break;
        case BG_RV_STATE_CLOSE_PILARS:
            for (uint8 i = BG_RV_OBJECT_PILAR_1; i <= BG_RV_OBJECT_PULLEY_2; ++i)
                DoorOpen(i);
            setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
            setState(BG_RV_STATE_CLOSE_FIRE);
            SwitchDynLos();
            break;
        }
    }
    else
        setTimer(getTimer() - diff);
}

開發者ID:Nedj，項目名稱:HD-TCore，代碼行數:45，代碼來源:BattlegroundRV.cpp

示例5: switch

void BattlegroundRV::Update(uint32 diff)
{
    Battleground::Update(diff);

    if (getTimer() < diff)
    {
        uint32 i;
        switch(getState())
        {
        case BG_RV_STATE_OPEN_FENCES:
        {
            setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
            setState(BG_RV_STATE_CLOSE_FIRE);
            break;
        }
        case BG_RV_STATE_CLOSE_FIRE:
            for (i = BG_RV_OBJECT_FIRE_1; i <= BG_RV_OBJECT_FIREDOOR_2; ++i)
                DoorClose(i);
            setTimer(BG_RV_FIRE_TO_PILAR_TIMER);
            setState(BG_RV_STATE_OPEN_PILARS);
            break;
        case BG_RV_STATE_OPEN_PILARS:
            for (i = BG_RV_OBJECT_PILAR_1; i <= BG_RV_OBJECT_PULLEY_2; ++i)
                DoorOpen(i);
            setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
            setState(BG_RV_STATE_OPEN_FIRE);
            break;
        case BG_RV_STATE_OPEN_FIRE:
            for (i = BG_RV_OBJECT_FIRE_1; i <= BG_RV_OBJECT_FIREDOOR_2; ++i)
                DoorOpen(i);
            setTimer(BG_RV_FIRE_TO_PILAR_TIMER);
            setState(BG_RV_STATE_CLOSE_PILARS);
            break;
        case BG_RV_STATE_CLOSE_PILARS:
            uint32 i;
            for (i = BG_RV_OBJECT_PILAR_1; i <= BG_RV_OBJECT_PULLEY_2; ++i)
                DoorOpen(i);
            setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
            setState(BG_RV_STATE_CLOSE_FIRE);
            break;
        }
    }
    else
        setTimer(getTimer() - diff);
}

開發者ID:sensibob，項目名稱:tempestcore，代碼行數:45，代碼來源:BattlegroundRV.cpp

示例6: DoorOpen

void BattlegroundWS::StartingEventOpenDoors()
{
    for (uint32 i = BG_WS_OBJECT_DOOR_A_1; i <= BG_WS_OBJECT_DOOR_A_4; ++i)
        DoorOpen(i);
    for (uint32 i = BG_WS_OBJECT_DOOR_H_1; i <= BG_WS_OBJECT_DOOR_H_2; ++i)
        DoorOpen(i);

    SpawnBGObject(BG_WS_OBJECT_DOOR_A_5, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_WS_OBJECT_DOOR_A_6, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_WS_OBJECT_DOOR_H_3, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_WS_OBJECT_DOOR_H_4, RESPAWN_ONE_DAY);

    for (uint32 i = BG_WS_OBJECT_A_FLAG; i <= BG_WS_OBJECT_BERSERKBUFF_2; ++i)
        SpawnBGObject(i, RESPAWN_IMMEDIATELY);

    // players joining later are not egible
    StartTimedAchievement(ACHIEVEMENT_TIMED_TYPE_EVENT, WS_EVENT_START_BATTLE);
}

開發者ID:JiniaTS，項目名稱:ArkCORE2，代碼行數:18，代碼來源:BattlegroundWS.cpp

示例7: DoorOpen

void BattlegroundDS::StartingEventOpenDoors()
{
    for (uint32 i = BG_DS_OBJECT_DOOR_1; i <= BG_DS_OBJECT_DOOR_2; ++i)
        DoorOpen(i);

    for (uint32 i = BG_DS_OBJECT_BUFF_1; i <= BG_DS_OBJECT_BUFF_2; ++i)
        SpawnBGObject(i, 60);

    setWaterFallTimer(urand(BG_DS_WATERFALL_TIMER_MIN, BG_DS_WATERFALL_TIMER_MAX));
    setWaterFallStatus(BG_DS_WATERFALL_STATUS_OFF);

    SpawnBGObject(BG_DS_OBJECT_WATER_2, RESPAWN_IMMEDIATELY);
    DoorOpen(BG_DS_OBJECT_WATER_2);

    // Turn off collision
    if (GameObject* gob = GetBgMap()->GetGameObject(BgObjects[BG_DS_OBJECT_WATER_1]))
        gob->SetGoState(GO_STATE_ACTIVE);
}

開發者ID:SkyFireArchives，項目名稱:SkyFireEMU_434，代碼行數:18，代碼來源:BattlegroundDS.cpp

示例8: DoorOpen

void BattlegroundDS::StartingEventOpenDoors()
{
    for(uint32 i = BG_DS_OBJECT_DOOR_1; i <= BG_DS_OBJECT_DOOR_2; ++i)
        DoorOpen(i);

    for(uint32 i = BG_DS_OBJECT_BUFF_1; i <= BG_DS_OBJECT_BUFF_2; ++i)
        SpawnBGObject(i, 60);

    SpawnBGObject(BG_DS_OBJECT_WATER_1, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_DS_OBJECT_WATER_2, RESPAWN_IMMEDIATELY);
    DoorOpen(BG_DS_OBJECT_WATER_2);

    setWaterFallTimer(urand(BG_DS_WATERFALL_TIMER_MIN, BG_DS_WATERFALL_TIMER_MAX));
    setWaterFallStatus(BG_DS_WATERFALL_STATUS_OFF);

    setPipeKnockBackTimer(BG_DS_PIPE_KNOCKBACK_FIRST_DELAY);
    setPipeKnockBackCount(0);
}

開發者ID:Darkelmo，項目名稱:MythCore，代碼行數:18，代碼來源:BattlegroundDS.cpp

示例9: OpenDoorEvent

void BattleGroundIC::StartingEventOpenDoors()
{
    OpenDoorEvent(BG_EVENT_DOOR);                        // used for activating teleport effects + opening tower gates
    for (int i = BG_IC_GO_T_ALLIANCE_WEST; i <= BG_IC_GO_T_HORDE_FRONT; ++i)
        DoorOpen(m_BgObjects[i]);

    // make teleporters clickable
    MakeInteractive(IC_EVENT_ADD_TELEPORT, 0, true);
}

開發者ID:BACKUPLIB，項目名稱:Infinity_MaNGOS，代碼行數:9，代碼來源:BattleGroundIC.cpp

示例10: DoorOpen

void BattlegroundDS::StartingEventOpenDoors()
{
    for (uint32 i = BG_DS_OBJECT_DOOR_1; i <= BG_DS_OBJECT_DOOR_2; ++i)
        DoorOpen(i);

    for (uint32 i = BG_DS_OBJECT_BUFF_1; i <= BG_DS_OBJECT_BUFF_2; ++i)
        SpawnBGObject(i, 60);

    SpawnBGObject(BG_DS_OBJECT_WATER_1, RESPAWN_ONE_DAY);
    SpawnBGObject(BG_DS_OBJECT_WATER_2, RESPAWN_IMMEDIATELY);
    DoorOpen(BG_DS_OBJECT_WATER_2);

    m_knockback = 15 * IN_MILLISECONDS;
    m_teleport = 5 * IN_MILLISECONDS;
    m_waterFallStatus = 0;
    m_waterFall = urand(BG_DS_WATERFALL_TIMER_MIN, BG_DS_WATERFALL_TIMER_MAX);
    m_dynamicLOSid = GetBgMap()->AddDynLOSObject(1291.56f, 790.837f, BG_DS_WATERFALL_RADIUS);
}

開發者ID:Aero100，項目名稱:ReanEmu，代碼行數:18，代碼來源:BattlegroundDS.cpp

示例11: ModifyStartDelayTime

void BattleGroundNA::Update(time_t diff)
{
    BattleGround::Update(diff);

    // after bg start we get there
    if (GetStatus() == STATUS_WAIT_JOIN && GetPlayersSize())
    {
        ModifyStartDelayTime(diff);

        if (!(m_Events & 0x01))
        {
            m_Events |= 0x01;
            for(uint32 i = BG_NA_OBJECT_DOOR_1; i <= BG_NA_OBJECT_DOOR_4; i++)
                SpawnBGObject(i, RESPAWN_IMMEDIATELY);

            SetStartDelayTime(START_DELAY1);
            SendMessageToAll(LANG_ARENA_ONE_MINUTE);
        }
        // After 30 seconds, warning is signalled
        else if (GetStartDelayTime() <= START_DELAY2 && !(m_Events & 0x04))
        {
            m_Events |= 0x04;
            SendMessageToAll(LANG_ARENA_THIRTY_SECONDS);
        }
        // After 15 seconds, warning is signalled
        else if (GetStartDelayTime() <= START_DELAY3 && !(m_Events & 0x08))
        {
            m_Events |= 0x08;
            SendMessageToAll(LANG_ARENA_FIFTEEN_SECONDS);
        }
        // delay expired (1 minute)
        else if (GetStartDelayTime() <= 0 && !(m_Events & 0x10))
        {
            m_Events |= 0x10;

            for(uint32 i = BG_NA_OBJECT_DOOR_1; i <= BG_NA_OBJECT_DOOR_2; i++)
                DoorOpen(i);

            SendMessageToAll(LANG_ARENA_BEGUN);
            SetStatus(STATUS_IN_PROGRESS);
            SetStartDelayTime(0);

            for(std::map<uint64, BattleGroundPlayer>::const_iterator itr = GetPlayers()->begin(); itr != GetPlayers()->end(); ++itr)
            {
                Player *plr = objmgr.GetPlayer(itr->first);
                if(plr)
                    plr->RemoveAurasDueToSpell(SPELL_ARENA_PREPARATION);
            }
        }
    }

    /*if(GetStatus() == STATUS_IN_PROGRESS)
    {
        // update something
    }*/
}

開發者ID:Artea，項目名稱:mangos-svn，代碼行數:56，代碼來源:BattleGroundNA.cpp

示例12: DoorOpen

void BattleGroundNA::StartingEventOpenDoors()
{
    for (uint32 i = BG_NA_OBJECT_DOOR_1; i <= BG_NA_OBJECT_DOOR_2; ++i)
        DoorOpen(i);

    for (uint32 i = BG_NA_OBJECT_BUFF_1; i <= BG_NA_OBJECT_BUFF_2; ++i)
        SpawnBGObject(i, 60);

    m_TimeElapsedSinceBeggining = 0;
}

開發者ID:Blumfield，項目名稱:TBCPvP，代碼行數:10，代碼來源:BattlegroundNA.cpp

示例13: DoorOpen

void BattlegroundBE::StartBattleground()
{
    BattlegroundMap::StartBattleground();

    for (uint32 i = BG_BE_OBJECT_DOOR_1; i <= BG_BE_OBJECT_DOOR_2; ++i)
        DoorOpen(i);

    for (uint32 i = BG_BE_OBJECT_BUFF_1; i <= BG_BE_OBJECT_BUFF_2; ++i)
        SpawnGameObject(i, 60);
}

開發者ID:TrueWoW，項目名稱:TrinityCore，代碼行數:10，代碼來源:BattlegroundBE.cpp

示例14: SpawnBGObject

void BattlegroundRV::StartingEventOpenDoors()
{
    // Buff respawn
    SpawnBGObject(BG_RV_OBJECT_BUFF_1, 90);
    SpawnBGObject(BG_RV_OBJECT_BUFF_2, 90);
    // Open Fences
    DoorOpen(BG_RV_OBJECT_FENCE_1);
    DoorOpen(BG_RV_OBJECT_FENCE_2);
    // Elevators
    DoorOpen(BG_RV_OBJECT_ELEVATOR_1);
    DoorOpen(BG_RV_OBJECT_ELEVATOR_2);

    setState(BG_RV_STATE_OPEN_FENCES);
    setTimer(BG_RV_FIRST_TIMER);

    // Should be false at first, TogglePillarCollision will do it.
    SetPillarCollision(true);
    TogglePillarCollision();
}

開發者ID:cooler-SAI，項目名稱:PandaFire，代碼行數:19，代碼來源:BattlegroundRV.cpp

示例15: switch

void BattlegroundRV::PostUpdateImpl(uint32 diff)
{
    if (getTimer() < diff)
    {
        switch (getState())
        {
            case BG_RV_STATE_OPEN_FENCES:
                setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
                setState(BG_RV_STATE_CLOSE_FIRE);
                break;
            case BG_RV_STATE_CLOSE_FIRE:
                for (uint8 i = BG_RV_OBJECT_FIRE_1; i <= BG_RV_OBJECT_FIREDOOR_2; ++i)
                    DoorClose(i);
                setTimer(BG_RV_FIRE_TO_PILAR_TIMER);
                setState(BG_RV_STATE_OPEN_PILARS);
                break;
            case BG_RV_STATE_OPEN_PILARS:
                for (uint8 i = BG_RV_OBJECT_PILAR_1; i <= BG_RV_OBJECT_PULLEY_2; ++i)
                    DoorOpen(i);
                TogglePillarCollision(false);
                setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
                setState(BG_RV_STATE_OPEN_FIRE);
                break;
            case BG_RV_STATE_OPEN_FIRE:
                // FIXME: after 3.2.0 it's only decorative and should be opened only one time at battle start
                for (uint8 i = BG_RV_OBJECT_FIRE_1; i <= BG_RV_OBJECT_FIREDOOR_2; ++i)
                    DoorOpen(i);
                setTimer(BG_RV_FIRE_TO_PILAR_TIMER);
                setState(BG_RV_STATE_CLOSE_PILARS);
                break;
            case BG_RV_STATE_CLOSE_PILARS:
                for (uint8 i = BG_RV_OBJECT_PILAR_1; i <= BG_RV_OBJECT_PULLEY_2; ++i)
                    DoorOpen(i);
                TogglePillarCollision(true);
                setTimer(BG_RV_PILAR_TO_FIRE_TIMER);
                setState(BG_RV_STATE_CLOSE_FIRE);
                break;
        }
    }
    else
        setTimer(getTimer() - diff);
}

開發者ID:Albis，項目名稱:TrinityCore，代碼行數:42，代碼來源:BattlegroundRV.cpp

注：本文中的DoorOpen函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。