當前位置: 首頁>>代碼示例>>C++>>正文

C++ DBGPRINT_RAW函數代碼示例

本文整理匯總了C++中DBGPRINT_RAW函數的典型用法代碼示例。如果您正苦於以下問題：C++ DBGPRINT_RAW函數的具體用法？C++ DBGPRINT_RAW怎麽用？C++ DBGPRINT_RAW使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。


在下文中一共展示了DBGPRINT_RAW函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: RTUSBCancelPendingBulkInIRP

/*
	========================================================================
	
	Routine Description:

	Arguments:

	Return Value:

	Note:
	
	========================================================================
*/
VOID	RTUSBCancelPendingBulkInIRP(
	IN	PRTMP_ADAPTER	pAd)
{
	PRX_CONTEXT		pRxContext;
	PCMD_RSP_CONTEXT pCmdRspEventContext = &pAd->CmdRspEventContext;
	UINT			i;

	DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->RTUSBCancelPendingBulkInIRP\n"));
	for ( i = 0; i < (RX_RING_SIZE); i++)
	{
		pRxContext = &(pAd->RxContext[i]);
		if(pRxContext->IRPPending == TRUE)
		{
			RTUSB_UNLINK_URB(pRxContext->pUrb);
			pRxContext->IRPPending = FALSE;
			pRxContext->InUse = FALSE;
			/*NdisInterlockedDecrement(&pAd->PendingRx);*/
			/*pAd->PendingRx--;*/
		}
	}

	if (pCmdRspEventContext->IRPPending == TRUE)
	{
		printk("unlink cmd rsp urb\n");
		RTUSB_UNLINK_URB(pCmdRspEventContext->pUrb);
		pCmdRspEventContext->IRPPending = FALSE;
		pCmdRspEventContext->InUse = FALSE;
	}

	DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n"));
}
開發者ID:avila-devlogic，項目名稱:D33_KK_Kernel，代碼行數:44，代碼來源:rtusb_bulk_1th.c

示例2: RTUSBRejectPendingPackets

/*
	========================================================================
	
	Routine Description:

	Arguments:

	Return Value:

	IRQL = 
	
	Note:
	
	========================================================================
*/
VOID	RTUSBRejectPendingPackets(
	IN	PRTMP_ADAPTER	pAd)
{
	UCHAR			Index;
	PQUEUE_ENTRY	pEntry;
	PNDIS_PACKET	pPacket;
	PQUEUE_HEADER	pQueue;
	
#ifdef RELEASE_EXCLUDE
	DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RejectPendingPackets\n"));
#endif // RELEASE_EXCLUDE //

	for (Index = 0; Index < 4; Index++)
	{
		NdisAcquireSpinLock(&pAd->TxSwQueueLock[Index]);
		while (pAd->TxSwQueue[Index].Head != NULL)
		{
			pQueue = (PQUEUE_HEADER) &(pAd->TxSwQueue[Index]);
			pEntry = RemoveHeadQueue(pQueue);
			pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
			RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
		}
		NdisReleaseSpinLock(&pAd->TxSwQueueLock[Index]);

	}
#ifdef RELEASE_EXCLUDE
	DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RejectPendingPackets\n"));
#endif // RELEASE_EXCLUDE //

}
開發者ID:vanhoefm，項目名稱:rt2870linux，代碼行數:45，代碼來源:rtusb_data.c

示例3: USBDevConfigInit

static BOOLEAN USBDevConfigInit(
	IN struct usb_device 	*dev,
	IN struct usb_interface *intf, 
	IN VOID					*pAd)
{
	struct usb_interface_descriptor *iface_desc;
	struct usb_endpoint_descriptor *endpoint;
	ULONG BulkOutIdx;
	UINT32 i;
	RT_CMD_USB_DEV_CONFIG Config, *pConfig = &Config;


	iface_desc = &intf->altsetting[0];

	/* get # of enpoints */
	pConfig->NumberOfPipes = iface_desc->bNumEndpoints;
	DBGPRINT(RT_DEBUG_TRACE, ("NumEndpoints=%d\n", iface_desc->bNumEndpoints));		 

	/* Configure Pipes */
	endpoint = &iface_desc->endpoint[0];
	BulkOutIdx = 0;

	for(i=0; i<pConfig->NumberOfPipes; i++)
	{
		if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) && 
			((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN))
		{
			pConfig->BulkInEpAddr = endpoint[i].bEndpointAddress;
			pConfig->BulkInMaxPacketSize = endpoint[i].wMaxPacketSize;

			DBGPRINT_RAW(RT_DEBUG_TRACE, ("BULK IN MaximumPacketSize = %d\n", pConfig->BulkInMaxPacketSize));
			DBGPRINT_RAW(RT_DEBUG_TRACE, ("EP address = 0x%2x  \n", endpoint[i].bEndpointAddress));
		}
		else if ((endpoint[i].bmAttributes == USB_ENDPOINT_XFER_BULK) && 
				((endpoint[i].bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT))
		{
			/* There are 6 bulk out EP. EP6 highest priority. */
			/* EP1-4 is EDCA.  EP5 is HCCA. */
			pConfig->BulkOutEpAddr[BulkOutIdx++] = endpoint[i].bEndpointAddress;
			pConfig->BulkOutMaxPacketSize = endpoint[i].wMaxPacketSize;

			DBGPRINT_RAW(RT_DEBUG_TRACE, ("BULK OUT MaximumPacketSize = %d\n", pConfig->BulkOutMaxPacketSize));
			DBGPRINT_RAW(RT_DEBUG_TRACE, ("EP address = 0x%2x  \n", endpoint[i].bEndpointAddress));
		}
	}

	if (!(pConfig->BulkInEpAddr && pConfig->BulkOutEpAddr[0])) 
	{
		printk("Could not find both bulk-in and bulk-out endpoints\n");
		return FALSE;
	}

	pConfig->pConfig = dev->config;
	RTMP_DRIVER_USB_CONFIG_INIT(pAd, pConfig);
	RT28XXVendorSpecificCheck(dev, pAd);

	return TRUE;
	
}
開發者ID:83GTIGuy，項目名稱:openwrtSDN，代碼行數:59，代碼來源:usb_main_dev.c

示例4: AsicSetRxAnt

/*
 Antenna divesity use GPIO3 and EESK pin for control
 Antenna and EEPROM access are both using EESK pin,
 Therefor we should avoid accessing EESK at the same time
 Then restore antenna after EEPROM access
 The original name of this function is AsicSetRxAnt(), now change to 
*/
VOID RT30xxSetRxAnt(
	IN PRTMP_ADAPTER	pAd,
	IN UCHAR			Ant)
{
	UINT32	Value;

	if (/*(!pAd->NicConfig2.field.AntDiversity) ||*/
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))	||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		return;
	}

	/* the antenna selection is through firmware and MAC register(GPIO3) */
	if (IS_RT2070(pAd) || (IS_RT3070(pAd) && pAd->RfIcType == RFIC_3020) ||
			(IS_RT3090(pAd) && pAd->RfIcType == RFIC_3020))
	{
	if (Ant == 0)
	{
		/*
			Main antenna
			E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
		*/
#ifdef RTMP_MAC_USB
		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0, FALSE);
#endif /* RTMP_MAC_USB */

		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
	}
	else
	{
		/*
			Aux antenna
		 	E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
		*/
#ifdef RTMP_MAC_USB
		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0, FALSE);
#endif /* RTMP_MAC_USB */
		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		Value |= 0x08;
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
		}
	}
}
開發者ID:32743069，項目名稱:amlogic_common_3050，代碼行數:58，代碼來源:rt30xx.c

示例5: RTUSBBulkOutRTSFrameComplete

// RTS frame use BulkOutPipeId = PipeID
VOID RTUSBBulkOutRTSFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs)
{
	PRTMP_ADAPTER	pAd;
	PTX_CONTEXT		pRTSContext;
	NTSTATUS		status;
	unsigned long	IrqFlags;
	
	pRTSContext= (PTX_CONTEXT)pUrb->context;
	pAd = pRTSContext->pAd;
	
	
	DBGPRINT_RAW(RT_DEBUG_INFO, "--->RTUSBBulkOutRTSFrameComplete\n");

	// Reset RTS frame context flags
	pRTSContext->IRPPending = FALSE;
	pRTSContext->InUse = FALSE;
		
	status = pUrb->status;
	
	if (status == USB_ST_NOERROR)
	{
		// Don't worry about the queue is empty or not, this function will check itself
		RTMPDeQueuePacket(pAd, pRTSContext->BulkOutPipeId);
	}
#if 1	// STATUS_OTHER
	else
	{
		if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
		{
			DBGPRINT_RAW(RT_DEBUG_ERROR, "Bulk Out RTS Frame Failed\n");
			RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
			RTUSBEnqueueInternalCmd(pAd, RT_OID_USB_RESET_BULK_OUT);
		}
	}
#endif

	NdisAcquireSpinLock(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId], IrqFlags);
	pAd->BulkOutPending[pRTSContext->BulkOutPipeId] = FALSE;
	NdisReleaseSpinLock(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId], IrqFlags);

	// Always call Bulk routine, even reset bulk.
	// The protectioon of rest bulk should be in BulkOut routine
	RTUSBKickBulkOut(pAd);

	DBGPRINT_RAW(RT_DEBUG_INFO, "<---RTUSBBulkOutRTSFrameComplete\n");
	
}
開發者ID:AxelLin，項目名稱:Drv，代碼行數:51，代碼來源:rtusb_bulk.c

示例6: RTUSBBulkOutRTSFrame

/*
	========================================================================
	
	Routine Description:

	Arguments:

	Return Value:

	Note: 
	
	========================================================================
*/
VOID	RTUSBBulkOutRTSFrame(
	IN	PRTMP_ADAPTER	pAd)
{
	PTX_CONTEXT	pRTSContext = &(pAd->RTSContext);
	PURB		pUrb;
	int 		ret = 0;
	unsigned long	IrqFlags;
	UCHAR		PipeID=0;
	
	if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_4))
		PipeID= 3;
	else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_3))
		PipeID= 2;
	else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL_2))
		PipeID= 1;
	else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL))
		PipeID= 0;


	NdisAcquireSpinLock(&pAd->BulkOutLock[PipeID], IrqFlags);
	if (pAd->BulkOutPending[PipeID] == TRUE)
	{
		NdisReleaseSpinLock(&pAd->BulkOutLock[PipeID], IrqFlags);
		return;
	}
	pAd->BulkOutPending[PipeID] = TRUE;
	NdisReleaseSpinLock(&pAd->BulkOutLock[PipeID], IrqFlags);

	// Increase Total transmit byte counter
	pAd->RalinkCounters.TransmittedByteCount +=  pRTSContext->BulkOutSize;

	DBGPRINT_RAW(RT_DEBUG_INFO, "--->RTUSBBulkOutRTSFrame \n");
	
	// Clear RTS frame bulk flag
	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_RTS);

	// Init Tx context descriptor
	RTUSBInitTxDesc(pAd, pRTSContext, PipeID, RTUSBBulkOutRTSFrameComplete);
	pRTSContext->IRPPending = TRUE;
	
	pUrb = pRTSContext->pUrb;
	if((ret = rtusb_submit_urb(pUrb))!=0)
	{
		DBGPRINT(RT_DEBUG_ERROR,"Submit Tx URB failed %d\n", ret);
		return;
	}	
	
	DBGPRINT_RAW(RT_DEBUG_INFO, "<---RTUSBBulkOutRTSFrame \n");
	return;
}
開發者ID:AxelLin，項目名稱:Drv，代碼行數:63，代碼來源:rtusb_bulk.c

示例7: RT30xxSetRxAnt

// Antenna divesity use GPIO3 and EESK pin for control
// Antenna and EEPROM access are both using EESK pin,
// Therefor we should avoid accessing EESK at the same time
// Then restore antenna after EEPROM access
// The original name of this function is AsicSetRxAnt(), now change to 
//VOID AsicSetRxAnt(
VOID RT30xxSetRxAnt(
	IN PRTMP_ADAPTER	pAd,
	IN UCHAR			Ant)
{
	UINT32	Value;
#ifdef RTMP_MAC_PCI
	UINT32	x;
#endif // RTMP_MAC_PCI //

	if ((pAd->EepromAccess) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))	||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		return;
	}

	// the antenna selection is through firmware and MAC register(GPIO3)
	if (Ant == 0)
	{
		// Main antenna
		// E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
#ifdef RTMP_MAC_PCI
		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
		x |= (EESK);
		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#endif // RTMP_MAC_PCI //

		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
	}
	else
	{
		// Aux antenna
		// E2PROM_CSR only in PCI bus Reg., USB Bus need MCU commad to control the EESK pin.
#ifdef RTMP_MAC_PCI
		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
		x &= ~(EESK);
		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#endif // RTMP_MAC_PCI //
		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		Value |= 0x08;
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
	}
}
開發者ID:schidler，項目名稱:flyzjhz-rt-n56u，代碼行數:56，代碼來源:rt30xx.c

示例8: rtusb_hcca_dma_done_tasklet

static void rtusb_hcca_dma_done_tasklet(unsigned long data)
{
	PRTMP_ADAPTER		pAd;
	PHT_TX_CONTEXT		pHTTXContext;
	UCHAR				BulkOutPipeId = 4;
	purbb_t				pUrb;

	
	DBGPRINT_RAW(RT_DEBUG_ERROR, ("--->hcca_dma_done_tasklet\n"));


	pUrb			= (purbb_t)data;
/*	pHTTXContext	= (PHT_TX_CONTEXT)pUrb->context; */
	pHTTXContext	= (PHT_TX_CONTEXT)RTMP_USB_URB_DATA_GET(pUrb);
	pAd				= pHTTXContext->pAd;

	rtusb_dataout_complete((unsigned long)pUrb);

	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | 
								fRTMP_ADAPTER_HALT_IN_PROGRESS | 
								fRTMP_ADAPTER_NIC_NOT_EXIST)))) 
	{
		/* do nothing and return directly. */
	}
	else 
	{	
		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET))
		{
			RTEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);	
		}
		else
		{	pHTTXContext = &pAd->TxContext[BulkOutPipeId];
			if ((pAd->TxSwQueue[BulkOutPipeId].Number > 0) && 
				/*((pHTTXContext->CurWritePosition > (pHTTXContext->NextBulkOutPosition + 0x6000)) || (pHTTXContext->NextBulkOutPosition > pHTTXContext->CurWritePosition + 0x6000)) && */
				(pAd->DeQueueRunning[BulkOutPipeId] == FALSE) && 
				(pHTTXContext->bCurWriting == FALSE))
			{
				RTMPDeQueuePacket(pAd, FALSE, BulkOutPipeId, MAX_TX_PROCESS);
			}
			
			RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL);
			RTUSBKickBulkOut(pAd);
		}
	}
	
	DBGPRINT_RAW(RT_DEBUG_ERROR, ("<---hcca_dma_done_tasklet\n"));

		return;
}
開發者ID:1950packard，項目名稱:rt3573sta，代碼行數:49，代碼來源:rt_usb.c

示例9: RTUSBBulkOutMLMEPacket

/*
	========================================================================
	
	Routine Description:

	Arguments:

	Return Value:

	Note: MLME use BulkOutPipeId = 0
	
	========================================================================
*/
VOID	RTUSBBulkOutMLMEPacket(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Index)
{
	PTX_CONTEXT		pMLMEContext;
	PURB			pUrb;
	int 			ret = 0;
	unsigned long	IrqFlags;
	
	pMLMEContext = &pAd->MLMEContext[Index];
	
	NdisAcquireSpinLock(&pAd->BulkOutLock[0], IrqFlags);
	if (pAd->BulkOutPending[0] == TRUE)
	{
		NdisReleaseSpinLock(&pAd->BulkOutLock[0], IrqFlags);
		return;
	}
	pAd->BulkOutPending[0] = TRUE;
	NdisReleaseSpinLock(&pAd->BulkOutLock[0], IrqFlags);

	// Increase Total transmit byte counter
	pAd->RalinkCounters.TransmittedByteCount +=  pMLMEContext->BulkOutSize;

	// Clear MLME bulk flag
	RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);

	DBGPRINT_RAW(RT_DEBUG_INFO, "RTUSBBulkOutMLMEPacket::PrioRingFirstIndex = %d, PrioRingTxCnt = %d, PopMgmtIndex = %d, PushMgmtIndex = %d, NextMLMEIndex = %d\n", 
			pAd->PrioRingFirstIndex, 
			pAd->PrioRingTxCnt, pAd->PopMgmtIndex, pAd->PushMgmtIndex, pAd->NextMLMEIndex);

	DBGPRINT_RAW(RT_DEBUG_INFO, "--->RTUSBBulkOutMLMEPacket\n");


	// Init Tx context descriptor
	RTUSBInitTxDesc(pAd, pMLMEContext, 0, RTUSBBulkOutMLMEPacketComplete);
	pMLMEContext->IRPPending = TRUE;


	pUrb = pMLMEContext->pUrb;
	if((ret = rtusb_submit_urb(pUrb))!=0)
	{
		DBGPRINT(RT_DEBUG_ERROR,"Submit MLME URB failed %d\n", ret);
		return;
	}
	
	DBGPRINT_RAW(RT_DEBUG_INFO, "<---RTUSBBulkOutMLMEPacket \n");
	return;
}
開發者ID:AxelLin，項目名稱:Drv，代碼行數:61，代碼來源:rtusb_bulk.c

示例10: RTUSBWriteRFRegister

/*
	========================================================================

	Routine Description: Write RF register through MAC

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBWriteRFRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UINT32			Value)
{
	PHY_CSR4_STRUC	PhyCsr4;
	UINT			i = 0;
	NTSTATUS		status;

	NdisZeroMemory(&PhyCsr4, sizeof(PHY_CSR4_STRUC));
	do
	{
		status = RTUSBReadMACRegister(pAd, RF_CSR_CFG0, &PhyCsr4.word);
		if (status >= 0)
		{
		if (!(PhyCsr4.field.Busy))
			break;
		}
		printk("RTUSBWriteRFRegister(RF_CSR_CFG0):retry count=%d!\n", i);
		i++;
	}
	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
		return STATUS_UNSUCCESSFUL;
	}

	RTUSBWriteMACRegister(pAd, RF_CSR_CFG0, Value);

	return STATUS_SUCCESS;
}
開發者ID:AppEngine，項目名稱:linux-2.6，代碼行數:47，代碼來源:rtusb_io.c

示例11: rf_csr_poll_idle

static inline BOOLEAN rf_csr_poll_idle(RTMP_ADAPTER *pAd, UINT32 *rfcsr)
{
    RF_CSR_CFG_STRUC *csr_val;
    BOOLEAN idle = BUSY;
    INT i = 0;

    do
    {
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
            break;

        RTMP_IO_READ32(pAd, RF_CSR_CFG, rfcsr);

        csr_val = (RF_CSR_CFG_STRUC *)rfcsr;
#ifdef RT65xx
        if (IS_RT65XX(pAd))
            idle = csr_val->bank_65xx.RF_CSR_KICK;
        else
#endif /* RT65xx */
            idle = csr_val->non_bank.RF_CSR_KICK;

        if (idle == IDLE)
            break;

        i++;
    } while (i < MAX_BUSY_COUNT);

    if ((i == MAX_BUSY_COUNT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
    {
        DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed(cnt=%d)!\n", i));
    }

    return idle;
}
開發者ID:jing-git，項目名稱:rt-n56u，代碼行數:34，代碼來源:rlt_rf.c

示例12: RT30xxSetRxAnt

/*void AsicSetRxAnt( */
void RT30xxSetRxAnt(struct rt_rtmp_adapter *pAd, u8 Ant)
{
	u32 Value;
#ifdef RTMP_MAC_PCI
	u32 x;
#endif

	if ((pAd->EepromAccess) ||
	    (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
	    (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
	    (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
	    (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
		return;
	}
	/* the antenna selection is through firmware and MAC register(GPIO3) */
	if (Ant == 0) {
		/* Main antenna */
#ifdef RTMP_MAC_PCI
		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
		x |= (EESK);
		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#else
		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0);
#endif /* RTMP_MAC_PCI // */

		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE,
			     ("AsicSetRxAnt, switch to main antenna\n"));
	} else {
		/* Aux antenna */
#ifdef RTMP_MAC_PCI
		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
		x &= ~(EESK);
		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
#else
		AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0);
#endif /* RTMP_MAC_PCI // */
		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		Value |= 0x08;
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE,
			     ("AsicSetRxAnt, switch to aux antenna\n"));
	}
}
開發者ID:ANFS，項目名稱:ANFS-kernel，代碼行數:48，代碼來源:rt30xx.c

示例13: RTUSBVenderReset

NTSTATUS RTUSBVenderReset(RTMP_ADAPTER *pAd)
{
	NTSTATUS Status;
	DBGPRINT_RAW(RT_DEBUG_ERROR, ("-->RTUSBVenderReset\n"));
	Status = RTUSB_VendorRequest(
		pAd,
		USBD_TRANSFER_DIRECTION_OUT,
		DEVICE_VENDOR_REQUEST_OUT,
		0x01,
		0x1,
		0,
		NULL,
		0);

	DBGPRINT_RAW(RT_DEBUG_ERROR, ("<--RTUSBVenderReset\n"));
	return Status;
}
開發者ID:vm3vuy，項目名稱:my-local-repository，代碼行數:17，代碼來源:rtusb_io.c

示例14: RT30xxWriteRFRegister

/*
	========================================================================

	Routine Description: Write RT30xx RF register through MAC

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NDIS_STATUS RT30xxWriteRFRegister(
    IN	PRTMP_ADAPTER	pAd,
    IN	UCHAR			regID,
    IN	UCHAR			value)
{
    RF_CSR_CFG_STRUC	rfcsr = { { 0 } };
    UINT				i = 0;


    ASSERT((regID <= pAd->chipCap.MaxNumOfRfId));

    do
    {
        RTMP_IO_READ32(pAd, RF_CSR_CFG, &rfcsr.word);

        if (!rfcsr.field.RF_CSR_KICK)
            break;
        i++;
    }
    while ((i < MAX_BUSY_COUNT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

    if ((i == MAX_BUSY_COUNT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
    {
        DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
        return STATUS_UNSUCCESSFUL;
    }

    rfcsr.field.RF_CSR_WR = 1;
    rfcsr.field.RF_CSR_KICK = 1;
    rfcsr.field.TESTCSR_RFACC_REGNUM = regID;

    if ((pAd->chipCap.RfReg17WtMethod == RF_REG_WT_METHOD_STEP_ON) && (regID == RF_R17))
    {
        UCHAR IdRf;
        UCHAR RfValue;
        BOOLEAN beAdd;

        RT30xxReadRFRegister(pAd, RF_R17, &RfValue);
        beAdd =  (RfValue < value) ? TRUE : FALSE;
        IdRf = RfValue;
        while(IdRf != value)
        {
            if (beAdd)
                IdRf++;
            else
                IdRf--;

            rfcsr.field.RF_CSR_DATA = IdRf;
            RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);
            RtmpOsMsDelay(1);
        }
    }

    rfcsr.field.RF_CSR_DATA = value;
    RTMP_IO_WRITE32(pAd, RF_CSR_CFG, rfcsr.word);

    return NDIS_STATUS_SUCCESS;
}
開發者ID:RD777，項目名稱:rt3573sta，代碼行數:73，代碼來源:rt_rf.c

示例15: RTUSBCancelPendingBulkInIRP

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	Note:

	========================================================================
*/
void RTUSBCancelPendingBulkInIRP(struct rt_rtmp_adapter *pAd)
{
	struct rt_rx_context *pRxContext;
	u32 i;

	DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->RTUSBCancelPendingBulkInIRP\n"));
	for (i = 0; i < (RX_RING_SIZE); i++) {
		pRxContext = &(pAd->RxContext[i]);
		if (pRxContext->IRPPending == TRUE) {
			RTUSB_UNLINK_URB(pRxContext->pUrb);
			pRxContext->IRPPending = FALSE;
			pRxContext->InUse = FALSE;
			/*NdisInterlockedDecrement(&pAd->PendingRx); */
			/*pAd->PendingRx--; */
		}
	}
	DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n"));
}
開發者ID:ARMP，項目名稱:android_kernel_lge_x3，代碼行數:31，代碼來源:rtusb_bulk.c


注：本文中的DBGPRINT_RAW函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。