C++ CPU_CACHE_Enable函數代碼示例

/**
  * @brief   Main program
  * @param  None
  * @retval None
  */
int main(void)
{
	/* Enable the CPU Cache */
	CPU_CACHE_Enable();

	/* STM32F7xx HAL library initialization */
	HAL_Init();

	/* Configure the system clock to 216 MHz */
	SystemClock_Config();

	/* Configure LCD : Only one layer is used */
	LCD_Config();

	/* Our main starts here */
	uint16_t ypos = 0, ymax = 0;
	int8_t yincr = 1;
	BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
	BSP_LCD_SetBackColor(LCD_COLOR_BLACK);

	while(1) {
	  if(ypos == 0) {
		  yincr = 1;
		  ymax = BSP_LCD_GetYSize();
	  } else {
		  yincr = -1;
		  ymax = 0;
	  }

	  for(;yincr == 1 ? ypos < BSP_LCD_GetYSize() - Font24.Height : ypos > 0; ypos+=yincr) {
		  BSP_LCD_DisplayStringAt(0, ypos, (uint8_t*)"Hello to everyone!", CENTER_MODE);
	  }
	}
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* This project template calls firstly two functions in order to configure MPU feature 
     and to enable the CPU Cache, respectively MPU_Config() and CPU_CACHE_Enable().
     These functions are provided as template implementation that User may integrate 
     in his application, to enhance the performance in case of use of AXI interface 
     with several masters. */ 
  
  /* Configure the MPU attributes as Write Through */
  MPU_Config();

  /* Enable the CPU Cache */
  CPU_CACHE_Enable();

  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the System clock to have a frequency of 216 MHz */
  SystemClock_Config();


  /* Add your application code here
     */


  /* Infinite loop */
  while (1)
  {
  }
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();

  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();
  
  /* Configure the system clock to 200 MHz */
  SystemClock_Config();
  
  /* Init task */
  osThreadDef(Start, StartThread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE *2);
  osThreadCreate (osThread(Start), NULL);
  
  /* Start the scheduler */
  osKernelStart();
  
  /* We should never get here as control is now taken by the scheduler */
  for( ;; );
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
	
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  if (HAL_Init() != HAL_OK)
  {
    Error_Handler();
  }

  /* Configure the system clock to 216 MHz */
  SystemClock_Config();

  /* -1- Initialize LEDs mounted on STM32756G-EVAL board */
  BSP_LED_Init(LED1);

  /* -2- Configure EXTI15_10 (connected to PC.13 pin) in interrupt mode */
  EXTI15_10_IRQHandler_Config();

  /* Infinite loop */
  while (1)
  {
  }
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
  
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();
  
  /* Configure the System clock to have a frequency of 200 Mhz */
  SystemClock_Config();
  
  /* Initialize IO expander */
  BSP_IO_Init();
  
  /* Start task */
  osThreadDef(USER_Thread, StartThread, osPriorityNormal, 0, 8 * configMINIMAL_STACK_SIZE);
  osThreadCreate(osThread(USER_Thread), NULL);
  
  /* Create Application Queue */
  osMessageQDef(osqueue, 1, uint16_t);
  AppliEvent = osMessageCreate(osMessageQ(osqueue), NULL);
  
  /* Start scheduler */
  osKernelStart();
  
  /* We should never get here as control is now taken by the scheduler */
  for( ;; );
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();

  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();  
  
  /* Configure the system clock to 216 Mhz */
  SystemClock_Config();
  
  /* Initialize LEDs */
  BSP_LED_Init(LED1);
  
  /* Thread 1 definition */
  osThreadDef(LED1, LED_Thread1, osPriorityNormal, 0, configMINIMAL_STACK_SIZE);
  
  /* Start thread 1 */
  LED1_ThreadId = osThreadCreate(osThread(LED1), NULL);
  
  /* Start scheduler */
  osKernelStart();
  
  /* We should never get here as control is now taken by the scheduler */
  for(;;);
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  uint32_t  i;
  uint32_t  *ptrLcd; 

  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
	
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 200 MHz */
  SystemClock_Config();
  
  /*##-1- Initialise the LCD #################################################*/
  BSP_LCD_Init();

  /* Init LCD screen buffer */
  ptrLcd = (uint32_t*)(LCD_FRAME_BUFFER);
  for (i=0; i<(BSP_LCD_GetXSize()*BSP_LCD_GetYSize()); i++)
  {
    ptrLcd[i]=0;
  }

  BSP_LCD_LayerDefaultInit(1, LCD_FRAME_BUFFER);

  /* Enable the LCD */
  BSP_LCD_DisplayOn();

  /* Select the LCD Foreground layer */
  BSP_LCD_SelectLayer(1);

  /* Set active window */
  BSP_LCD_SetLayerWindow(1, xoffset, yoffset, xsize, ysize);
  
  /*##-2- Camera Initialisation and start capture ############################*/
  /* Initialize the Camera */
  BSP_CAMERA_Init(resolution);

  /* Wait 1s before Camera snapshot */
  HAL_Delay(1000);

  /* Start the Camera Capture */
  BSP_CAMERA_SnapshotStart((uint8_t *)CAMERA_FRAME_BUFFER);

  while (1)
  {
  }
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
    /* Configure the MPU attributes as Write Through */
    MPU_Config();

    /* Enable the CPU Cache */
    CPU_CACHE_Enable();

    /* STM32F7xx HAL library initialization:
         - Configure the Flash ART accelerator on ITCM interface
         - Systick timer is configured by default as source of time base, but user
           can eventually implement his proper time base source (a general purpose
           timer for example or other time source), keeping in mind that Time base
           duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
           handled in milliseconds basis.
         - Set NVIC Group Priority to 4
         - Low Level Initialization
       */
    HAL_Init();

    /* Configure LED1 and LED3 */
    BSP_LED_Init(LED1);
    BSP_LED_Init(LED3);

    /* Configure the system clock to 200 MHz */
    /* This function will be executed from SDRAM */
    SystemClock_Config();

    /*##-1- Fill the buffer in the SDRAM device ##########################################*/
    Fill_Buffer(aTable, 1024, 0);

    /*##-2- Read address of the buffer and stack pointer address ########################*/
    uwTabAddr = (uint32_t)aTable; /* should be above 0x60000000 */

    /* Get main stack pointer value */
    MSPValue = __get_MSP(); /* should be above 0x60000000 */

    /*##-3- Activate LEDs pending on read values ########################################*/
    if ((uwTabAddr >= SDRAM_ADDRESS) && (MSPValue >= SDRAM_ADDRESS))
    {
        BSP_LED_On(LED1);
    }
    else
    {   /* Toggle LED3 in an infinite loop */
        while (1)
        {
            BSP_LED_Toggle(LED3);
            /* Insert delay 100 ms */
            HAL_Delay(100);
        }
    }

    /* Infinite loop */
    while (1)
    {
    }
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
  
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 216 MHz */
  SystemClock_Config();

  /* Initialize BSP Led for N/A */
  BSP_LED_Init(LED1);

  /*##-1- Configure the UART peripheral ######################################*/
  /* Put the USART peripheral in the Asynchronous mode (UART Mode) */
  /* UART configured as follows:
      - Word Length = 8 Bits (7 data bit + 1 parity bit) : 
	                  BE CAREFUL : Program 7 data bits + 1 parity bit in PC HyperTerminal
      - Stop Bit    = One Stop bit
      - Parity      = ODD parity
      - BaudRate    = 9600 baud
      - Hardware flow control disabled (RTS and CTS signals) */
  UartHandle.Instance        = USARTx;

  UartHandle.Init.BaudRate   = 9600;
  UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
  UartHandle.Init.StopBits   = UART_STOPBITS_1;
  UartHandle.Init.Parity     = UART_PARITY_ODD;
  UartHandle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
  UartHandle.Init.Mode       = UART_MODE_TX_RX;
  UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&UartHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }

  /* Output a message on Hyperterminal using printf function */
  printf("\n\r UART Printf Example: retarget the C library printf function to the UART\n\r");
//  printf("** Test finished successfully. ** \n\r");

sprintf
  /* Infinite loop */
  while (1)
  {
  }
}

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
	
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 216 MHz */
  SystemClock_Config();

  /* Configure LED1 and LED3 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED3);
  
  /*##-1- Configure ADC1, ADC2 and ADC3 peripherals ################################*/
  ADC_Config();

  /*##-2- Enable ADC3 ########################################################*/
  if(HAL_ADC_Start(&AdcHandle3) != HAL_OK)
  {
    /* Start Error */
    Error_Handler();
  }

  /*##-3- Enable ADC2 ########################################################*/
  if (HAL_ADC_Start(&AdcHandle2) != HAL_OK)
  {
    /* Start Error */
    Error_Handler();
  }

  /*##-4- Start ADC1 and ADC2 multimode conversion process and enable DMA ####*/
  if (HAL_ADCEx_MultiModeStart_DMA(&AdcHandle1, (uint32_t *)aADCTripleConvertedValue, 3) != HAL_OK)
  {
    /* Start Error */
    Error_Handler();
  }

  /* Infinite loop */
  while (1)
  {
  }
}

int main (void) {

  MPU_Config();                             /* Configure the MPU              */
  CPU_CACHE_Enable();                       /* Enable the CPU Cache           */
  HAL_Init();                               /* Initialize the HAL Library     */
  BSP_SDRAM_Init();                         /* Initialize BSP SDRAM           */
  SystemClock_Config();                     /* Configure the System Clock     */
  init_filesystem();                        /* Inital rl-flash Librart        */

  MainTask();
  for (;;);
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
  
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();
  
  /* Configure the System clock to have a frequency of 216 MHz */
  SystemClock_Config();
    
  /* Configure Key Button */
  BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
  
  /* Check if the KEY Button is pressed */
  if(BSP_PB_GetState(BUTTON_KEY) == 0x00)
  {
    /* Test if user code is programmed starting from USBD_DFU_APP_DEFAULT_ADD address */
    if(((*(__IO uint32_t*)USBD_DFU_APP_DEFAULT_ADD) & 0x2FFE0000 ) == 0x20000000)
    {
      /* Jump to user application */
      JumpAddress = *(__IO uint32_t*) (USBD_DFU_APP_DEFAULT_ADD + 4);
      JumpToApplication = (pFunction) JumpAddress;
      
      /* Initialize user application's Stack Pointer */
      __set_MSP(*(__IO uint32_t*) USBD_DFU_APP_DEFAULT_ADD);
      JumpToApplication();
    }
  }
  
  /* Otherwise enters DFU mode to allow user programming his application */
  /* Init Device Library */
  USBD_Init(&USBD_Device, &DFU_Desc, 0);
  
  /* Add Supported Class */
  USBD_RegisterClass(&USBD_Device, USBD_DFU_CLASS);
  
  /* Add DFU Media interface */
  USBD_DFU_RegisterMedia(&USBD_Device, &USBD_DFU_Flash_fops);

  /* Start Device Process */
  USBD_Start(&USBD_Device);
  
  /* Run Application (Interrupt mode) */
  while (1)
  {
  }
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Configure the MPU attributes as Write Through */
  MPU_Config();

  /* Enable the CPU Cache */
  CPU_CACHE_Enable();

  /* STM32F7xx HAL library initialization:
       - Configure the Flash prefetch
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 216 MHz */
  SystemClock_Config();

  /* Initialize LED */
  BSP_LED_Init(LED1);

  /* Set to 1 if an transfer error is detected */
  transferErrorDetected = 0;
  transferCompleteDetected = 0;

  /* Configure and enable the DMA stream for Memory to Memory transfer */
  DMA_Config();

  /* Infinite loop */
  while (1)
  {
    if (transferErrorDetected == 1)
    {
      /* Toggle LED1 with a period of 200 ms */
      BSP_LED_Toggle(LED1);
      HAL_Delay(200);
      transferErrorDetected = 0;
    }
    if (transferCompleteDetected == 1)
    {
      /* Turn LED1 on*/
      BSP_LED_On(LED1);
      transferCompleteDetected = 0;
    } 
  }
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
	
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();


  /* Initialize Tamper push-button, will be used to trigger an interrupt each time it's pressed.
       In the ISR the PLL source will be changed from HSI to HSE circularly */
  BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_EXTI);

  /* Enable the PWR Clock */
  __HAL_RCC_PWR_CLK_ENABLE();
  
  /* Enable HSE oscillator and configure the PLL to reach the max system frequency (216 MHz)
     when using HSE oscillator as PLL clock source. */
  SystemClock_Config();

  /* Output SYSCLK / 2 on MCO2 pin(PC.09) */
  HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_2);

  /* Since MFX is used, LED init is done after clock config */
  /* Configure LED1 and LED3 */
  BSP_LED_Init(LED1);
  BSP_LED_Init(LED3);

  /* Toggle some leds in an infinite loop */
  while (1)
  {
    /* check if user button has been pressed to switch clock config */
    if(SwitchClock != RESET)
    {
      SwitchSystemClock();
    }
    
    /* Toggle LED1 */
    BSP_LED_Toggle(LED1);
    HAL_Delay(100);
  }
}

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
  
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */   
  HAL_Init();
  
  /* Configure the system clock to 200 MHz */
  SystemClock_Config(); 

  /* Init Audio Application */
  AUDIO_InitApplication();

  /* Init Host Library */
  USBH_Init(&hUSBHost, USBH_UserProcess, 0);

  /* Add Supported Class */
  USBH_RegisterClass(&hUSBHost, USBH_MSC_CLASS);
  
  /* Start Host Process */
  USBH_Start(&hUSBHost);
  
  /* Run Application (Blocking mode) */
  while (1)
  {
    /* USB Host Background task */
    USBH_Process(&hUSBHost);
    
    /* AUDIO Menu Process */
    AUDIO_MenuProcess();

    if ( MfxToggleLed == 1)
    { 
#if defined(USE_STM32756G_EVAL_REVA)
      /* On RevA board, as LED1 is connected to MFX, the toggle is performed in main loop */
      BSP_LED_Toggle(LED1);
#else
      /* On RevB board, as LED1 is connected to GPIO, it is toggled in ISR,
       * the LED4 is toggled in main loop as it is connected to MFX */
      BSP_LED_Toggle(LED4);
#endif
      MfxToggleLed = 0;
    }
  }
}