C++ BLE_UUID_BLE_ASSIGN函數代碼示例

本文整理匯總了C++中BLE_UUID_BLE_ASSIGN函數的典型用法代碼示例。如果您正苦於以下問題：C++ BLE_UUID_BLE_ASSIGN函數的具體用法？C++ BLE_UUID_BLE_ASSIGN怎麽用？C++ BLE_UUID_BLE_ASSIGN使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了BLE_UUID_BLE_ASSIGN函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: ble_ans_c_init

uint32_t ble_ans_c_init(ble_ans_c_t * p_ans, const ble_ans_c_init_t * p_ans_init)
{
    VERIFY_PARAM_NOT_NULL(p_ans);
    VERIFY_PARAM_NOT_NULL(p_ans_init);
    VERIFY_PARAM_NOT_NULL(p_ans_init->evt_handler);

    // clear all handles
    memset(p_ans, 0, sizeof(ble_ans_c_t));
    memset(m_tx_buffer, 0, TX_BUFFER_SIZE);
    p_ans->conn_handle = BLE_CONN_HANDLE_INVALID;

    p_ans->evt_handler         = p_ans_init->evt_handler;
    p_ans->error_handler       = p_ans_init->error_handler;
    p_ans->message_buffer_size = p_ans_init->message_buffer_size;
    p_ans->p_message_buffer    = p_ans_init->p_message_buffer;

    BLE_UUID_BLE_ASSIGN(p_ans->service.service.uuid, BLE_UUID_ALERT_NOTIFICATION_SERVICE);
    BLE_UUID_BLE_ASSIGN(p_ans->service.new_alert.uuid, BLE_UUID_NEW_ALERT_CHAR);
    BLE_UUID_BLE_ASSIGN(p_ans->service.alert_notif_ctrl_point.uuid,
                        BLE_UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR);
    BLE_UUID_BLE_ASSIGN(p_ans->service.unread_alert_status.uuid, BLE_UUID_UNREAD_ALERT_CHAR);
    BLE_UUID_BLE_ASSIGN(p_ans->service.suported_new_alert_cat.uuid,
                        BLE_UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR);
    BLE_UUID_BLE_ASSIGN(p_ans->service.suported_unread_alert_cat.uuid,
                        BLE_UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR);

    BLE_UUID_BLE_ASSIGN(p_ans->service.new_alert_cccd.uuid, BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG);
    BLE_UUID_BLE_ASSIGN(p_ans->service.unread_alert_cccd.uuid,
                        BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG);

    return ble_db_discovery_evt_register(&p_ans->service.service.uuid);
}

開發者ID:IOIOI，項目名稱:nRF51，代碼行數:32，代碼來源:ble_ans_c.c

示例2: ble_qodome_init

uint32_t ble_qodome_init(void)
{
    uint32_t   err_code;
    ble_uuid_t ble_uuid;
    // Initialize service structure
    ble_qodome_t  * p_qodome = &m_qodome;

    p_qodome->conn_handle = BLE_CONN_HANDLE_INVALID;
    // Add service
    BLE_UUID_BLE_ASSIGN(ble_uuid, QODOME_PUBLIC_SERVICE);

    err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY, &ble_uuid, &p_qodome->service_handle);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    // Add memory dump characteristic
    err_code = hts_qodome_char_add(p_qodome);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }

    return NRF_SUCCESS;
}

開發者ID:qodome，項目名稱:Firmware，代碼行數:25，代碼來源:ble_qodome_public.c

示例3: ble_bps_init

uint32_t ble_bps_init(ble_bps_t * p_bps, const ble_bps_init_t * p_bps_init)
{
    uint32_t   err_code;
    ble_uuid_t ble_uuid;

    // Initialize service structure
    p_bps->evt_handler = p_bps_init->evt_handler;
    p_bps->conn_handle = BLE_CONN_HANDLE_INVALID;
    p_bps->feature     = p_bps_init->feature;

    // Add service
    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_BLOOD_PRESSURE_SERVICE);

    err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY, &ble_uuid, &p_bps->service_handle);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    // Add measurement characteristic
    err_code = bps_measurement_char_add(p_bps, p_bps_init);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    // Add feature characteristic
    err_code = bps_feature_char_add(p_bps, p_bps_init);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    return NRF_SUCCESS;
}

開發者ID:451506709，項目名稱:automated_machine，代碼行數:35，代碼來源:ble_bps.c

示例4: ble_bas_init

uint32_t ble_bas_init(ble_bas_t * p_bas, const ble_bas_init_t * p_bas_init)
{
    if (p_bas == NULL || p_bas_init == NULL)
    {
        return NRF_ERROR_NULL;
    }

    uint32_t   err_code;
    ble_uuid_t ble_uuid;

    // Initialize service structure
    p_bas->evt_handler               = p_bas_init->evt_handler;
    p_bas->conn_handle               = BLE_CONN_HANDLE_INVALID;
    p_bas->is_notification_supported = p_bas_init->support_notification;
    p_bas->battery_level_last        = INVALID_BATTERY_LEVEL;

    // Add service
    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_BATTERY_SERVICE);

    err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY, &ble_uuid, &p_bas->service_handle);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }

    // Add battery level characteristic
    return battery_level_char_add(p_bas, p_bas_init);
}

開發者ID:etx，項目名稱:Espruino，代碼行數:28，代碼來源:ble_bas.c

示例5: ble_ias_init

uint32_t ble_ias_init(ble_ias_t * p_ias, const ble_ias_init_t * p_ias_init)
{
    uint32_t   err_code;
    ble_uuid_t ble_uuid;

    // Initialize service structure
    if (p_ias_init->evt_handler == NULL)
    {
        return NRF_ERROR_INVALID_PARAM;
    }
    p_ias->evt_handler = p_ias_init->evt_handler;

    // Add service
    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_IMMEDIATE_ALERT_SERVICE);

    err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
                                        &ble_uuid,
                                        &p_ias->service_handle);

    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }

    // Add alert level characteristic
    return alert_level_char_add(p_ias);
}

開發者ID:TanekLiang，項目名稱:rt-thread，代碼行數:27，代碼來源:ble_ias.c

示例6: ble_cscs_init

uint32_t ble_cscs_init(ble_cscs_t * p_cscs, const ble_cscs_init_t * p_cscs_init)
{
    uint32_t   err_code;
    ble_uuid_t ble_uuid;
    ble_cs_ctrlpt_init_t sc_ctrlpt_init;

    // Initialize service structure
    p_cscs->evt_handler = p_cscs_init->evt_handler;
    p_cscs->conn_handle = BLE_CONN_HANDLE_INVALID;
    p_cscs->feature     = p_cscs_init->feature;

    // Add service
    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_CYCLING_SPEED_AND_CADENCE);

    err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
                                        &ble_uuid,
                                        &p_cscs->service_handle);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    // Add cycling speed and cadence measurement characteristic
    err_code = csc_measurement_char_add(p_cscs, p_cscs_init);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    // Add cycling speed and cadence feature characteristic
    err_code = csc_feature_char_add(p_cscs, p_cscs_init);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    // Add Sensor Location characteristic (optional)
    if (p_cscs_init->sensor_location != NULL)
    {
        err_code = csc_sensor_loc_char_add(p_cscs, p_cscs_init);
        if (err_code != NRF_SUCCESS)
        {
            return err_code;
        }
    }


    //Add speed and cadence control point characteristic
    sc_ctrlpt_init.error_handler                 = p_cscs_init->error_handler;
    sc_ctrlpt_init.size_list_supported_locations = p_cscs_init->size_list_supported_locations;
    sc_ctrlpt_init.supported_functions           = p_cscs_init->ctrplt_supported_functions;
    sc_ctrlpt_init.evt_handler                   = p_cscs_init->ctrlpt_evt_handler;
    sc_ctrlpt_init.list_supported_locations      = p_cscs_init->list_supported_locations;
    sc_ctrlpt_init.sc_ctrlpt_attr_md             = p_cscs_init->csc_ctrlpt_attr_md;
    sc_ctrlpt_init.sensor_location_handle        = p_cscs->sensor_loc_handles.value_handle;
    sc_ctrlpt_init.service_handle                = p_cscs->service_handle;

    return ble_sc_ctrlpt_init(&p_cscs->ctrl_pt, &sc_ctrlpt_init);
}

開發者ID:Aidan-zhang，項目名稱:nRF51SDK，代碼行數:59，代碼來源:ble_cscs.c

示例7: indication_char_add

static uint32_t	indication_char_add(uint16_t 							uuid, 
									uint8_t 							*p_char_value, 
									uint16_t 							char_len, 
									const ble_srv_cccd_security_mode_t* idc_char_attr_md, 
									ble_gatts_char_handles_t* 			p_handles)
{
	ble_gatts_char_md_t char_md;
    ble_gatts_attr_md_t cccd_md;
	ble_gatts_attr_md_t attr_md;
    ble_gatts_attr_t    attr_char_value;
    ble_uuid_t          ble_uuid;

	APP_ERROR_CHECK_BOOL(p_char_value != NULL);
    APP_ERROR_CHECK_BOOL(char_len > 0);

	memset(&cccd_md, 0, sizeof(cccd_md));

	BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
	BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.write_perm);

	cccd_md.vloc = BLE_GATTS_VLOC_STACK;
	cccd_md.write_perm = idc_char_attr_md->cccd_write_perm;

	memset(&char_md, 0, sizeof(char_md));

	char_md.char_props.indicate	= 1;
	char_md.p_char_user_desc	= NULL;
	char_md.p_char_pf			= NULL;
	char_md.p_user_desc_md		= NULL;
	char_md.p_cccd_md 			= &cccd_md;
	char_md.p_sccd_md			= NULL;

	BLE_UUID_BLE_ASSIGN(ble_uuid, uuid);

	memset(&attr_md, 0, sizeof(attr_md));

	attr_md.vloc		=	BLE_GATTS_VLOC_STACK;
	attr_md.read_perm	=	idc_char_attr_md->read_perm;
	attr_md.write_perm	=	idc_char_attr_md->write_perm;
	attr_md.rd_auth		=	0;
	attr_md.wr_auth		=	0;
	attr_md.vlen		=	1;

	memset(&attr_char_value, 0, sizeof(attr_char_value));

	attr_char_value.p_uuid		= &ble_uuid;
	attr_char_value.p_attr_md	= &attr_md;
	attr_char_value.init_len	= char_len;
	attr_char_value.init_offs	= 0;
	attr_char_value.max_len		= char_len;
	attr_char_value.p_value		= p_char_value;

	return sd_ble_gatts_characteristic_add(service_handle, \
										   &char_md, \
										   &attr_char_value, \
										   p_handles);		
}

開發者ID:slkyff，項目名稱:Children_Wireless_Thermometer，代碼行數:57，代碼來源:user_drv_self_def_service.c

示例8: boot_inp_rep_char_add

/**@brief Function for adding Input Report characteristics.
 *
 * @param[in]   p_hids           HID Service structure.
 * @param[in]   uuid             UUID of report characteristic to be added.
 * @param[in]   max_data_len     Maximum length of report value.
 * @param[in]   p_sec_mode       Characteristic security settings.
 * @param[out]  p_char_handles   Handles of new characteristic.
 *
 * @return      NRF_SUCCESS on success, otherwise an error code.
 */
static uint32_t boot_inp_rep_char_add(ble_hids_t                         * p_hids,
                                      uint16_t                             uuid,
                                      uint16_t                             max_data_len,
                                      const ble_srv_cccd_security_mode_t * p_sec_mode,
                                      ble_gatts_char_handles_t           * p_char_handles)
{
    ble_gatts_char_md_t char_md;
    ble_gatts_attr_md_t cccd_md;
    ble_gatts_attr_t    attr_char_value;
    ble_uuid_t          ble_uuid;
    ble_gatts_attr_md_t attr_md;

    memset(&cccd_md, 0, sizeof(cccd_md));

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
    cccd_md.write_perm = p_sec_mode->cccd_write_perm;
    cccd_md.vloc       = BLE_GATTS_VLOC_STACK;

    memset(&char_md, 0, sizeof(char_md));

    char_md.char_props.read   = 1;
    char_md.char_props.write  = (p_sec_mode->write_perm.sm) ? 1 : 0;
    char_md.char_props.notify = 1;
    char_md.p_char_user_desc  = NULL;
    char_md.p_char_pf         = NULL;
    char_md.p_user_desc_md    = NULL;
    char_md.p_cccd_md         = &cccd_md;
    char_md.p_sccd_md         = NULL;

    BLE_UUID_BLE_ASSIGN(ble_uuid, uuid);

    memset(&attr_md, 0, sizeof(attr_md));

    attr_md.read_perm  = p_sec_mode->read_perm;
    attr_md.write_perm = p_sec_mode->write_perm;
    attr_md.vloc       = BLE_GATTS_VLOC_STACK;
    attr_md.rd_auth    = 0;
    attr_md.wr_auth    = 0;
    attr_md.vlen       = 0;

    memset(&attr_char_value, 0, sizeof(attr_char_value));

    attr_char_value.p_uuid    = &ble_uuid;
    attr_char_value.p_attr_md = &attr_md;
    attr_char_value.init_len  = 0;
    attr_char_value.init_offs = 0;
    attr_char_value.max_len   = max_data_len;
    attr_char_value.p_value   = NULL;

    return sd_ble_gatts_characteristic_add(p_hids->service_handle,
                                           &char_md,
                                           &attr_char_value,
                                           p_char_handles);
}

開發者ID:451506709，項目名稱:automated_machine，代碼行數:64，代碼來源:ble_hids.c

示例9: on_connect

/**@brief Function for handling the Connect event.
 *
 * @param[in]   p_ias_c     Immediate Alert Service client structure.
 * @param[in]   p_ble_evt   Event received from the BLE stack.
 */
static uint32_t on_connect(ble_ias_c_t * p_ias_c, ble_evt_t const * p_ble_evt)
{
    ble_uuid_t ias_uuid;

    p_ias_c->conn_handle = p_ble_evt->evt.gap_evt.conn_handle;

    // Discover Immediate alert service
    BLE_UUID_BLE_ASSIGN(ias_uuid, BLE_UUID_IMMEDIATE_ALERT_SERVICE);

    return sd_ble_gattc_primary_services_discover(p_ias_c->conn_handle, START_HANDLE, &ias_uuid);
}

開發者ID:CorBiNO，項目名稱:Atomwear，代碼行數:16，代碼來源:ble_ias_c.c

示例10: heart_rate_measurement_char_add

/**@brief Function for adding the Heart Rate Measurement characteristic.
 *
 * @param[in]   p_hrs        Heart Rate Service structure.
 * @param[in]   p_hrs_init   Information needed to initialize the service.
 *
 * @return      NRF_SUCCESS on success, otherwise an error code.
 */
static uint32_t heart_rate_measurement_char_add(ble_hrs_t            * p_hrs,
                                                const ble_hrs_init_t * p_hrs_init)
{
	simple_uart_putstring("add heart rate measurement");
    ble_gatts_char_md_t char_md;
    ble_gatts_attr_md_t cccd_md;
    ble_gatts_attr_t    attr_char_value;
    ble_uuid_t          ble_uuid;
    ble_gatts_attr_md_t attr_md;
    uint8_t             encoded_initial_hrm[MAX_HRM_LEN];

    memset(&cccd_md, 0, sizeof(cccd_md));

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
    cccd_md.write_perm = p_hrs_init->hrs_hrm_attr_md.cccd_write_perm;
    cccd_md.vloc       = BLE_GATTS_VLOC_STACK;

    memset(&char_md, 0, sizeof(char_md));

    char_md.char_props.notify = 1;
    char_md.p_char_user_desc  = NULL;
    char_md.p_char_pf         = NULL;
    char_md.p_user_desc_md    = NULL;
    char_md.p_cccd_md         = &cccd_md;
    char_md.p_sccd_md         = NULL;

    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_HEART_RATE_MEASUREMENT_CHAR);

    memset(&attr_md, 0, sizeof(attr_md));

    attr_md.read_perm  = p_hrs_init->hrs_hrm_attr_md.read_perm;
    attr_md.write_perm = p_hrs_init->hrs_hrm_attr_md.write_perm;
    attr_md.vloc       = BLE_GATTS_VLOC_STACK;
    attr_md.rd_auth    = 0;
    attr_md.wr_auth    = 0;
    attr_md.vlen       = 1;

    memset(&attr_char_value, 0, sizeof(attr_char_value));

    attr_char_value.p_uuid    = &ble_uuid;
    attr_char_value.p_attr_md = &attr_md;
    attr_char_value.init_len  = hrm_encode(p_hrs, INITIAL_VALUE_HRM, encoded_initial_hrm);
    attr_char_value.init_offs = 0;
    attr_char_value.max_len   = MAX_HRM_LEN;
    attr_char_value.p_value   = encoded_initial_hrm;

    return sd_ble_gatts_characteristic_add(p_hrs->service_handle,
                                           &char_md,
                                           &attr_char_value,
                                           &p_hrs->hrm_handles);
}

開發者ID:vikev，項目名稱:SLIP，代碼行數:58，代碼來源:ble_hrs.c

示例11: hts_measurement_char_add

/**@brief Add Health Thermometer Measurement characteristic.
 *
 * @param[in]   p_hts        Health Thermometer Service structure.
 * @param[in]   p_hts_init   Information needed to initialize the service.
 *
 * @return      NRF_SUCCESS on success, otherwise an error code.
 */
static uint32_t hts_measurement_char_add(ble_hts_t * p_hts, const ble_hts_init_t * p_hts_init)
{
    ble_gatts_char_md_t char_md;
    ble_gatts_attr_md_t cccd_md;
    ble_gatts_attr_t    attr_char_value;
    ble_uuid_t          ble_uuid;
    ble_gatts_attr_md_t attr_md;
    ble_hts_meas_t      initial_htm;
    uint8_t             encoded_htm[MAX_HTM_LEN];
    
    memset(&cccd_md, 0, sizeof(cccd_md));

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
    cccd_md.vloc = BLE_GATTS_VLOC_STACK;
    cccd_md.write_perm = p_hts_init->hts_meas_attr_md.cccd_write_perm;

    memset(&char_md, 0, sizeof(char_md));
    
    char_md.char_props.indicate = 1;
    char_md.p_char_user_desc    = NULL;
    char_md.p_char_pf           = NULL;
    char_md.p_user_desc_md      = NULL;
    char_md.p_cccd_md           = &cccd_md;
    char_md.p_sccd_md           = NULL;
    
    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_TEMPERATURE_MEASUREMENT_CHAR);
    
    memset(&attr_md, 0, sizeof(attr_md));

    attr_md.vloc       = BLE_GATTS_VLOC_STACK;
    attr_md.read_perm  = p_hts_init->hts_meas_attr_md.read_perm;
    attr_md.write_perm = p_hts_init->hts_meas_attr_md.write_perm;
    attr_md.rd_auth    = 0;
    attr_md.wr_auth    = 0;
    attr_md.vlen       = 1;
    
    memset(&attr_char_value, 0, sizeof(attr_char_value));
    memset(&initial_htm, 0, sizeof(initial_htm));
    
    attr_char_value.p_uuid       = &ble_uuid;
    attr_char_value.p_attr_md    = &attr_md;
    attr_char_value.init_len     = hts_measurement_encode(p_hts, &initial_htm, encoded_htm);
    attr_char_value.init_offs    = 0;
    attr_char_value.max_len      = MAX_HTM_LEN;
    attr_char_value.p_value      = encoded_htm;
    
    return sd_ble_gatts_characteristic_add(p_hts->service_handle,
                                           &char_md,
                                           &attr_char_value,
                                           &p_hts->meas_handles);
}

開發者ID:amurlynx，項目名稱:rf-nordic，代碼行數:58，代碼來源:ble_hts.c

示例12: dp_otp_char_add

/**@brief Digipass OTP characteristic.
 *
 * @param[in]   p_dp        Digipass Service structure.
 * @param[in]   p_dp_init   Information needed to initialize the service.
 *
 * @return      NRF_SUCCESS on success, otherwise an error code.
 */
static uint32_t dp_otp_char_add(ble_dp_t * p_dp, const ble_dp_init_t * p_dp_init)
{
    ble_gatts_char_md_t char_md;
    //ble_gatts_attr_md_t cccd_md;
    ble_gatts_attr_t    attr_char_value;
    ble_uuid_t          ble_uuid;
    ble_gatts_attr_md_t attr_md;
    uint8_t             initial_otp;

    memset(&char_md, 0, sizeof(char_md));
    
		char_md.char_props.read   = 1; //Reading value permitted.
    //char_md.char_properties.notify = (p_bas->is_notification_supported) ? 1 : 0;
    char_md.p_char_user_desc       = NULL; //Pointer to a UTF-8, NULL if the descriptor is not required.
    char_md.p_char_pf              = NULL; //Pointer to a presentation format structure or NULL if the descriptor is not required.
    char_md.p_user_desc_md         = NULL; //Attribute Metadata for the User Description descriptor, or NULL for default values.
    //char_md.p_cccd_md              = (p_bas->is_notification_supported) ? &cccd_md : NULL;
		char_md.p_cccd_md							 = NULL;
		//Attribute Metadata for the Client Characteristic Configuration Descriptor, or NULL for default values.
    char_md.p_sccd_md              = NULL; 
		//Attribute Metadata for the Server Characteristic Configuration Descriptor, or NULL for default values.
    
    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_DP_OTP); //Assing Digipass OTP UUID
    
    memset(&attr_md, 0, sizeof(attr_md));

    attr_md.read_perm  = p_dp_init->dp_otp_char_attr_md.read_perm; //Read permissions.
    attr_md.write_perm = p_dp_init->dp_otp_char_attr_md.write_perm; //Write permissions.
    attr_md.vloc       = BLE_GATTS_VLOC_STACK; /**< Value is located in stack memory. */
    attr_md.rd_auth    = 0;  //Value will be requested from application on every read. OFF
    attr_md.wr_auth    = 0; //Value will be reported to application on every write. OFF
    attr_md.vlen       = 0; //Variable length attribute. OFF
    
    initial_otp = p_dp_init->initial_otp;
    
    memset(&attr_char_value, 0, sizeof(attr_char_value));

    attr_char_value.p_uuid       = &ble_uuid; //Pointer to the attribute UUID.
    attr_char_value.p_attr_md    = &attr_md; //Pointer to the attribute metadata structure.
    attr_char_value.init_len     = sizeof(uint8_t); //Initial attribute value length in bytes.
    attr_char_value.init_offs    = 0; 
		//Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized.
    attr_char_value.max_len      = sizeof(uint8_t); //Maximum attribute value length in bytes.
    attr_char_value.p_value      = &initial_otp; //Pointer to the attribute data.
    
    return sd_ble_gatts_characteristic_add(p_dp->service_handle, 
																						&char_md,
                                            &attr_char_value,
                                            &p_dp->dp_otp_handles);
}

開發者ID:claesmathias，項目名稱:ble_app_hrs，代碼行數:57，代碼來源:ble_dp.c

示例13: csc_sensor_loc_char_add

/**@brief Function for adding CSC Sensor Location characteristic.
 *
 * @param[in]   p_cscs        Cycling Speed and Cadence Service structure.
 * @param[in]   p_cscs_init   Information needed to initialize the service.
 *
 * @return      NRF_SUCCESS on success, otherwise an error code.
 */
static uint32_t csc_sensor_loc_char_add(ble_cscs_t * p_cscs, const ble_cscs_init_t * p_cscs_init)
{
    ble_gatts_char_md_t char_md;
    ble_gatts_attr_t    attr_char_value;
    ble_uuid_t          ble_uuid;
    ble_gatts_attr_md_t attr_md;
    uint8_t             init_value_len;
    uint8_t             encoded_init_value[1];

    memset(&char_md, 0, sizeof(char_md));

    char_md.char_props.read  = 1;
    char_md.p_char_user_desc = NULL;
    char_md.p_char_pf        = NULL;
    char_md.p_user_desc_md   = NULL;
    char_md.p_cccd_md        = NULL;
    char_md.p_sccd_md        = NULL;

    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_SENSOR_LOCATION_CHAR);

    memset(&attr_md, 0, sizeof(attr_md));

    attr_md.read_perm  = p_cscs_init->csc_sensor_loc_attr_md.read_perm;
    BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&attr_md.write_perm);
    attr_md.vloc       = BLE_GATTS_VLOC_STACK;
    attr_md.rd_auth    = 0;
    attr_md.wr_auth    = 0;
    attr_md.vlen       = 0;

    memset(&attr_char_value, 0, sizeof(attr_char_value));

    init_value_len        = sizeof(uint8_t);
    if (p_cscs_init->sensor_location != NULL)
    {
        encoded_init_value[0] = *p_cscs_init->sensor_location;
    }

    attr_char_value.p_uuid       = &ble_uuid;
    attr_char_value.p_attr_md    = &attr_md;
    attr_char_value.init_len     = init_value_len;
    attr_char_value.init_offs    = 0;
    attr_char_value.max_len      = init_value_len;
    attr_char_value.p_value      = encoded_init_value;

    return sd_ble_gatts_characteristic_add(p_cscs->service_handle,
                                           &char_md,
                                           &attr_char_value,
                                           &p_cscs->sensor_loc_handles);
}

開發者ID:Aidan-zhang，項目名稱:nRF51SDK，代碼行數:56，代碼來源:ble_cscs.c

示例14: ble_ias_c_init

uint32_t ble_ias_c_init(ble_ias_c_t * p_ias_c, ble_ias_c_init_t const * p_ias_c_init)
{
    if (p_ias_c_init->evt_handler == NULL)
    {
        return NRF_ERROR_INVALID_PARAM;
    }

    p_ias_c->evt_handler                       = p_ias_c_init->evt_handler;
    p_ias_c->error_handler                     = p_ias_c_init->error_handler;
    p_ias_c->conn_handle                       = BLE_CONN_HANDLE_INVALID;
    p_ias_c->alert_level_handle                = BLE_GATT_HANDLE_INVALID;

    BLE_UUID_BLE_ASSIGN(m_alert_level_uuid, BLE_UUID_ALERT_LEVEL_CHAR);
    
    return NRF_SUCCESS;
}

開發者ID:CorBiNO，項目名稱:Atomwear，代碼行數:16，代碼來源:ble_ias_c.c

示例15: ble_tps_init

uint32_t ble_tps_init(ble_tps_t * p_tps, const ble_tps_init_t * p_tps_init)
{
    uint32_t   err_code;
    ble_uuid_t ble_uuid;

    // Add service
    BLE_UUID_BLE_ASSIGN(ble_uuid, BLE_UUID_TX_POWER_SERVICE);

    err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY, &ble_uuid, &p_tps->service_handle);
    if (err_code != NRF_SUCCESS)
    {
        return err_code;
    }
    
    // Add TX Power Level characteristic
    return tx_power_level_char_add(p_tps, p_tps_init);
}

開發者ID:1072258106，項目名稱:duband，代碼行數:17，代碼來源:ble_tps.c

注：本文中的BLE_UUID_BLE_ASSIGN函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。