C++ BITCSET函數代碼示例

本文整理匯總了C++中BITCSET函數的典型用法代碼示例。如果您正苦於以下問題：C++ BITCSET函數的具體用法？C++ BITCSET怎麽用？C++ BITCSET使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了BITCSET函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: VIOC_VIN_SetImageOffset

/* Image offset setting */
void VIOC_VIN_SetImageOffset(VIOC_VIN *pVIN, unsigned int offs_width, unsigned int offs_height, unsigned int offs_height_intl)
{
	//pVIN->uVIN_OFFS.bVIN_OFFS.offs_width		= offs_width;
	//pVIN->uVIN_OFFS.bVIN_OFFS.offs_height		= offs_height;
	//pVIN->uVIN_OFFS_INTL.bVIN_OFFS.offs_height	= offs_height_intl;

	BITCSET(pVIN->uVIN_OFFS.nREG, 0xFFFFFFFF, (offs_height << 16) | (offs_width) );
	BITCSET(pVIN->uVIN_OFFS_INTL.nREG, 0xFFFF0000, (offs_height_intl << 16) );
}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:10，代碼來源:vioc_vin.c

示例2: Gre2d_src_ctrl

/*------------------------------------------------------------------
Gre2d_src_ctrl
 graphic engine sorce control
-------------------------------------------------------------------*/
void Gre2d_src_ctrl(G2D_SRC_CTRL reg)
{
    unsigned int sf_ctrl_reg = 0, sa_ctrl_reg = 0,ctrl_reg = 0;
	POVERLAYMIXER pHwOVERLAYMIXER;
	pHwOVERLAYMIXER  = (volatile POVERLAYMIXER)tcc_p2v(HwOVERLAYMIXER_BASE);


#if defined(CONFIG_ARCH_TCC892X)

// source YUV to RGB converter enable 	sf_ctrl
    sf_ctrl_reg |= (((reg.src0_y2r.src_y2r <<24) & Hw2D_SFCTRL_S0_Y2REN) | 
                    ((reg.src1_y2r.src_y2r <<25) & Hw2D_SFCTRL_S1_Y2REN) | ((reg.src2_y2r.src_y2r <<26) & Hw2D_SFCTRL_S2_Y2REN));

// source YUV to RGB coverter type	sf_ctrl
    sf_ctrl_reg |= (((reg.src0_y2r.src_y2r_type<<16) & Hw2D_SFCTRL_S0_Y2RMODE) | 
                    ((reg.src1_y2r.src_y2r_type <<18) & Hw2D_SFCTRL_S1_Y2RMODE) | ((reg.src2_y2r.src_y2r_type <<20) & Hw2D_SFCTRL_S2_Y2RMODE));

// source select  sf_ctrl
    sf_ctrl_reg |= ((reg.src_sel_0) & Hw2D_SFCTRL_S0_SEL) |((reg.src_sel_1<<2) & Hw2D_SFCTRL_S1_SEL) 
    		| ((reg.src_sel_2<<4) & Hw2D_SFCTRL_S2_SEL) | ((reg.src_sel_3<<6) & Hw2D_SFCTRL_S3_SEL) ;

// source arithmetic mode 	sa_ctrl
    sa_ctrl_reg |= (((reg.src0_arith ) & Hw2D_SACTRL_S0_ARITHMODE) | 
                    ((reg.src1_arith<<4) & Hw2D_SACTRL_S1_ARITHMODE) | ((reg.src2_arith<<8) & Hw2D_SACTRL_S2_ARITHMODE));
// source chroma key enable : for arithmetic	sa_ctrl
    sa_ctrl_reg |= (((reg.src0_chroma_en<<16) & Hw2D_SACTRL_S0_CHROMAEN) | 
                    ((reg.src1_chroma_en<<17) & Hw2D_SACTRL_S1_CHROMAEN) | ((reg.src2_chroma_en<<18) & Hw2D_SACTRL_S2_CHROMAEN));

	BITCSET(pHwOVERLAYMIXER->SF_CTRL.nREG, 0x0FFFFFFF, sf_ctrl_reg); 
	BITCSET(pHwOVERLAYMIXER->SA_CTRL.nREG, 0x0FFFFFFF, sa_ctrl_reg); 
#else

// source arithmetic mode 
    ctrl_reg |= (((reg.src0_arith<<19) & Hw2D_SCTRL_S0_ARITHMODE) | 
                    ((reg.src1_arith<<22) & Hw2D_SCTRL_S1_ARITHMODE) | ((reg.src2_arith<<25) & Hw2D_SCTRL_S2_ARITHMODE));

// source YUV to RGB converter enable
    ctrl_reg |= (((reg.src0_y2r.src_y2r <<16) & Hw2D_SCTRL_S0_Y2REN) | 
                    ((reg.src1_y2r.src_y2r <<17) & Hw2D_SCTRL_S1_Y2REN) | ((reg.src2_y2r.src_y2r <<18) & Hw2D_SCTRL_S2_Y2REN));

// source YUV to RGB coverter type
    ctrl_reg |= (((reg.src0_y2r.src_y2r_type<<9) & Hw2D_SCTRL_S0_Y2RMODE) | 
                    ((reg.src1_y2r.src_y2r_type <<11) & Hw2D_SCTRL_S1_Y2RMODE) | ((reg.src2_y2r.src_y2r_type <<13) & Hw2D_SCTRL_S2_Y2RMODE));

// source chroma key enable : for arithmetic
    ctrl_reg |= (((reg.src0_chroma_en<<6) & Hw2D_SCTRL_S0_CHROMAEN) | 
                    ((reg.src1_chroma_en<<7) & Hw2D_SCTRL_S1_CHROMAEN) | ((reg.src2_chroma_en<<8) & Hw2D_SCTRL_S2_CHROMAEN));

// source select
    ctrl_reg |= (((reg.src_sel_0) & Hw2D_SCTRL_S0_SEL) | 
                    ((reg.src_sel_1<<2) & Hw2D_SCTRL_S1_SEL) | ((reg.src_sel_2<<4) & Hw2D_SCTRL_S2_SEL));

	BITCSET(pHwOVERLAYMIXER->S_CTRL, 0x0FFFFFFF, ctrl_reg); 
#endif

}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:60，代碼來源:tcc_Gre2d.c

示例3: VIOC_RDMA_SetImageEnable

void VIOC_RDMA_SetImageEnable(VIOC_RDMA *pRDMA )
{
    /*
    pRDMA->uCTRL.bREG.IEN = 1;
    pRDMA->uCTRL.bREG.UPD = 1;
    */

    BITCSET(pRDMA->uCTRL.nREG, 1<<28, 1<<28 );
    BITCSET(pRDMA->uCTRL.nREG, 1<<16, 1<<16 );

}

開發者ID:JeffreyLau，項目名稱:JJWD-K8_icsCream，代碼行數:11，代碼來源:vioc_rdma.c

示例4: Gre2d_Grp_enable

/*------------------------------------------------------------------
Gre2d_Grp_enable
 graphic engine channel enable control
-------------------------------------------------------------------*/
void Gre2d_Grp_enable(G2D_EN grp_enalbe, unsigned char int_en)
{
	POVERLAYMIXER pHwOVERLAYMIXER;
	pHwOVERLAYMIXER  = (volatile POVERLAYMIXER)tcc_p2v(HwOVERLAYMIXER_BASE);
	
	#if defined(CONFIG_ARCH_TCC892X)	
	BITCSET( pHwOVERLAYMIXER->OM_CTRL.nREG, (HwGE_GE_CTRL_EN|HwGE_GE_INT_EN), ((int_en<<16)|grp_enalbe));
	#else
	BITCSET( pHwOVERLAYMIXER->OM_CTRL, (HwGE_GE_CTRL_EN|HwGE_GE_INT_EN), ((int_en<<16)|grp_enalbe));
	#endif
}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:15，代碼來源:tcc_Gre2d.c

示例5: Gre2d_Grp_int_en

/*------------------------------------------------------------------
Gre2d_Grp_int_en
 graphic engine interrupt enable
-------------------------------------------------------------------*/
void Gre2d_Grp_int_en(unsigned int int_en)
{
	POVERLAYMIXER pHwOVERLAYMIXER;
	pHwOVERLAYMIXER  = (volatile POVERLAYMIXER)tcc_p2v(HwOVERLAYMIXER_BASE);

#if defined(CONFIG_ARCH_TCC892X)	
	BITCSET( pHwOVERLAYMIXER->OM_IREQ.nREG, 0xFFFFFFFF, int_en);
#else 
	BITCSET( pHwOVERLAYMIXER->OM_IREQ, 0xFFFFFFFF, int_en);
#endif

}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:16，代碼來源:tcc_Gre2d.c

示例6: VIOC_WDMA_SetImageBase

void VIOC_WDMA_SetImageBase(VIOC_WDMA *pWDMA, unsigned int nBase0, unsigned int nBase1, unsigned int nBase2)
{
	/*
	pWDMA->uBASE0  = nBase0;
	pWDMA->uBASE1  = nBase1;
	pWDMA->uBASE2  = nBase2;
	*/

	BITCSET(pWDMA->uBASE0, 0xFFFFFFFF, nBase0);
	BITCSET(pWDMA->uBASE1, 0xFFFFFFFF, nBase1);
	BITCSET(pWDMA->uBASE2, 0xFFFFFFFF, nBase2);	
}

開發者ID:JeffreyLau，項目名稱:JJWD-K8_icsCream，代碼行數:12，代碼來源:vioc_wdma.c

示例7: VIOC_RDMA_SetIreqMask

/* set 1 : IREQ Masked( interrupt disable), set 0 : IREQ UnMasked( interrput enable)  */
void VIOC_RDMA_SetIreqMask(VIOC_RDMA * pRDMA, unsigned int mask, unsigned int set)
{
    if( set == 0 ) /* Interrupt Enable*/
    {
        //pRDMA->uIRQMSK.nREG &= ~mask;
        BITCSET(pRDMA->uIRQMSK.nREG, 0x0000001F, ~mask);
    }
    else/* Interrupt Diable*/
    {
        //pRDMA->uIRQMSK.nREG |= mask;
        BITCSET(pRDMA->uIRQMSK.nREG, 0x0000001F, mask);
    }
}

開發者ID:JeffreyLau，項目名稱:JJWD-K8_icsCream，代碼行數:14，代碼來源:vioc_rdma.c

示例8: VIOC_WDMA_SetIreqMask

void VIOC_WDMA_SetIreqMask(VIOC_WDMA * pWDMA, unsigned int mask, unsigned int set)
{	/* set 1 : IREQ Masked(interrupt disable), set 0 : IREQ UnMasked(interrput enable) */
	if(set == 0)	/* Interrupt Enable*/
	{
		//pWDMA->uIRQMSK.nREG &= ~mask;
		BITCSET(pWDMA->uIRQMSK.nREG, 0x0000001F, ~mask);
	}
	else/* Interrupt Diable*/
	{
		//pWDMA->uIRQMSK.nREG |=  mask;
		BITCSET(pWDMA->uIRQMSK.nREG, 0x0000001F, mask);
	}
}

開發者ID:JeffreyLau，項目名稱:JJWD-K8_icsCream，代碼行數:13，代碼來源:vioc_wdma.c

示例9: goodix_wakeup_init

static void goodix_wakeup_init(void)
{
	BITCSET(TS_WAKEUP_PORT_EN, TS_WAKEUP_PIN, TS_WAKEUP_PIN);  //output mode

	BITCSET(TS_WAKEUP_PORT_DAT, TS_WAKEUP_PIN, TS_WAKEUP_PIN);//HIGH to enter sleep mode
	mdelay(100);
	BITCSET(TS_WAKEUP_PORT_DAT, TS_WAKEUP_PIN, 0);//set low to wakeup goodix device
	mdelay(100);
	/*if(TS_WAKEUP_ENABLE == mode){
		BITCSET(TS_WAKEUP_PORT_DAT, TS_WAKEUP_PIN, 0);//set low to wakeup goodix device
	}
	else{//(TS_WAKEUP_DISABLE == mode)
		BITCSET(TS_WAKEUP_PORT_DAT, TS_WAKEUP_PIN, TS_WAKEUP_PIN);//HIGH to enter sleep mode
	}*/
}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:15，代碼來源:tcc_ts_goodix.c

示例10: VIOC_VIN_SetInterlaceMode

/* Interlace mode setting */
void VIOC_VIN_SetInterlaceMode(VIOC_VIN *pVIN, unsigned int intl_en, unsigned int intpl_en)
{
	//pVIN->uVIN_CTRL.bVIN_CTRL.intl_en	= intl_en;
	//pVIN->uVIN_CTRL.bVIN_CTRL.intpl_en	= intpl_en;

	BITCSET(pVIN->uVIN_CTRL.nREG, 0x0000000C, (intl_en<<2) | (intpl_en<<3));
}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:8，代碼來源:vioc_vin.c

示例11: VIOC_VIN_SetImageSize

/* Image size setting */
void VIOC_VIN_SetImageSize(VIOC_VIN *pVIN, unsigned int width, unsigned int height)
{	/* pkjin20 : Chip Bug... To Prevent Read Operation */
	//pVIN->uVIN_SIZE.bVIN_SIZE.width	 	= width;	//(height << 16) | width;
	//pVIN->uVIN_SIZE.bVIN_SIZE.height	= height;

	BITCSET(pVIN->uVIN_SIZE.nREG, 0xFFFFFFFF, (height << 16) | width);	
}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:8，代碼來源:vioc_vin.c

示例12: Gre2d_SetBCh_position

/*------------------------------------------------------------------
Gre2d_SetBCh_position
 graphic engine BACK END channel position settig
 
 frameps_x, frameps_y : frame pixsel size
 poffset_x, poffset_y : pixsel offset
-------------------------------------------------------------------*/
void Gre2d_SetBCh_position(G2D_CHANNEL ch, unsigned int  frameps_x, unsigned int  frameps_y, unsigned int  poffset_x, unsigned int  poffset_y)
{
	POVERLAYMIXER pHwOVERLAYMIXER;
	pHwOVERLAYMIXER  = (volatile POVERLAYMIXER)tcc_p2v(HwOVERLAYMIXER_BASE);
	
    if(ch == DEST_CH)
    {
	#if defined(CONFIG_ARCH_TCC892X)
		BITCSET(pHwOVERLAYMIXER->BCH_DFSIZE.nREG, 0x0FFF0FFF, ((frameps_y<<16) | frameps_x)); // pHwOVERLAYMIXER->BCH_DFSIZE
		BITCSET(pHwOVERLAYMIXER->BCH_DOFF.nREG, 0x0FFF0FFF, ((poffset_y<<16) | poffset_x)); // pHwOVERLAYMIXER->BCH_DOFF
	#else
		BITCSET(pHwOVERLAYMIXER->BCH_DFSIZE, 0x0FFF0FFF, ((frameps_y<<16) | frameps_x)); // pHwOVERLAYMIXER->BCH_DFSIZE
		BITCSET(pHwOVERLAYMIXER->BCH_DOFF, 0x0FFF0FFF, ((poffset_y<<16) | poffset_x)); // pHwOVERLAYMIXER->BCH_DOFF
	#endif
    }   
}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:23，代碼來源:tcc_Gre2d.c

示例13: VIOC_RDMA_SetImageAlpha

void VIOC_RDMA_SetImageAlpha(VIOC_RDMA *pRDMA, unsigned int nAlpha0, unsigned int nAlpha1)
{
    //pRDMA->uALPHA.bREG.ALPHA0 = nAlpha0;
    //pRDMA->uALPHA.bREG.ALPHA1 = nAlpha1;

    BITCSET(pRDMA->uALPHA.nREG, 0x00FF00FF, ( nAlpha1 << 16 ) | nAlpha0 );
}

開發者ID:JeffreyLau，項目名稱:JJWD-K8_icsCream，代碼行數:7，代碼來源:vioc_rdma.c

示例14: VIOC_VIN_SetLUTEnable

/* LUT Enable/Disable */
void VIOC_VIN_SetLUTEnable(VIOC_VIN *pVIN, unsigned int lut0_en, unsigned int lut1_en, unsigned int lut2_en)
{
	//pVIN->uVIN_MISC1.bVIN_MISC1.lut0_en = lut0_en;	/* Color Y  (or R) */
	//pVIN->uVIN_MISC1.bVIN_MISC1.lut1_en = lut1_en;	/* Color Cb (or G) */
	//pVIN->uVIN_MISC1.bVIN_MISC1.lut2_en = lut2_en;	/* Color Cr (or B) */
	BITCSET(pVIN->uVIN_MISC1.nREG, 0x00000007, (lut2_en << 2) | (lut1_en << 1) | (lut0_en));
}

開發者ID:AmesianX，項目名稱:telechips-linux，代碼行數:8，代碼來源:vioc_vin.c

示例15: VIOC_WDMA_SetImageSize

void VIOC_WDMA_SetImageSize(VIOC_WDMA *pWDMA, unsigned int sw, unsigned int sh)
{
	//pWDMA->uSIZE.bREG.WIDTH   = sw;
	//pWDMA->uSIZE.bREG.HEIGHT  = sh;

	BITCSET(pWDMA->uSIZE.nREG, 0xFFFFFFFF, (sh << 16) | (sw) );		
}

開發者ID:JeffreyLau，項目名稱:JJWD-K8_icsCream，代碼行數:7，代碼來源:vioc_wdma.c

注：本文中的BITCSET函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。