本文整理匯總了C++中BIO_dgram_is_sctp函數的典型用法代碼示例。如果您正苦於以下問題：C++ BIO_dgram_is_sctp函數的具體用法？C++ BIO_dgram_is_sctp怎麽用？C++ BIO_dgram_is_sctp使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。
在下文中一共展示了BIO_dgram_is_sctp函數的10個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。
示例1: dtls1_write_app_data_bytes
int dtls1_write_app_data_bytes(SSL *s, int type, const void *buf_, int len)
{
int i;
#ifndef OPENSSL_NO_SCTP
/*
* Check if we have to continue an interrupted handshake for reading
* belated app data with SCTP.
*/
if ((SSL_in_init(s) && !s->in_handshake) ||
(BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
(s->state == DTLS1_SCTP_ST_SR_READ_SOCK
|| s->state == DTLS1_SCTP_ST_CR_READ_SOCK)))
#else
if (SSL_in_init(s) && !s->in_handshake)
#endif
{
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES,
SSL_R_SSL_HANDSHAKE_FAILURE);
return -1;
}
}
if (len > SSL3_RT_MAX_PLAIN_LENGTH) {
SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES, SSL_R_DTLS_MESSAGE_TOO_BIG);
return -1;
}
i = dtls1_write_bytes(s, type, buf_, len);
return i;
}示例2: dtls1_buffer_record
int dtls1_buffer_record(SSL *s, record_pqueue *queue, unsigned char *priority)
{
DTLS1_RECORD_DATA *rdata;
pitem *item;
/* Limit the size of the queue to prevent DOS attacks */
if (pqueue_size(queue->q) >= 100)
return 0;
rdata = OPENSSL_malloc(sizeof(*rdata));
item = pitem_new(priority, rdata);
if (rdata == NULL || item == NULL) {
OPENSSL_free(rdata);
pitem_free(item);
SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
return -1;
}
rdata->packet = s->rlayer.packet;
rdata->packet_length = s->rlayer.packet_length;
memcpy(&(rdata->rbuf), &s->rlayer.rbuf, sizeof(SSL3_BUFFER));
memcpy(&(rdata->rrec), &s->rlayer.rrec, sizeof(SSL3_RECORD));
item->data = rdata;
#ifndef OPENSSL_NO_SCTP
/* Store bio_dgram_sctp_rcvinfo struct */
if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
(SSL_get_state(s) == TLS_ST_SR_FINISHED
|| SSL_get_state(s) == TLS_ST_CR_FINISHED)) {
BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_GET_RCVINFO,
sizeof(rdata->recordinfo), &rdata->recordinfo);
}
#endif
s->rlayer.packet = NULL;
s->rlayer.packet_length = 0;
memset(&s->rlayer.rbuf, 0, sizeof(s->rlayer.rbuf));
memset(&s->rlayer.rrec, 0, sizeof(s->rlayer.rrec));
if (!ssl3_setup_buffers(s)) {
SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
OPENSSL_free(rdata->rbuf.buf);
OPENSSL_free(rdata);
pitem_free(item);
return (-1);
}
/* insert should not fail, since duplicates are dropped */
if (pqueue_insert(queue->q, item) == NULL) {
SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
OPENSSL_free(rdata->rbuf.buf);
OPENSSL_free(rdata);
pitem_free(item);
return (-1);
}
return (1);
}示例3: dtls1_start_timer
void dtls1_start_timer(SSL *s)
{
#ifndef OPENSSL_NO_SCTP
/* Disable timer for SCTP */
if (BIO_dgram_is_sctp(SSL_get_wbio(s))) {
memset(&s->d1->next_timeout, 0, sizeof(s->d1->next_timeout));
return;
}
#endif
/* If timer is not set, initialize duration with 1 second */
if (s->d1->next_timeout.tv_sec == 0 && s->d1->next_timeout.tv_usec == 0) {
s->d1->timeout_duration = 1;
}
/* Set timeout to current time */
get_current_time(&(s->d1->next_timeout));
/* Add duration to current time */
s->d1->next_timeout.tv_sec += s->d1->timeout_duration;
BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT, 0,
&(s->d1->next_timeout));
}示例4: dtls1_shutdown
int dtls1_shutdown(SSL *s)
{
int ret;
#ifndef OPENSSL_NO_SCTP
BIO *wbio;
wbio = SSL_get_wbio(s);
if (wbio != NULL && BIO_dgram_is_sctp(wbio) &&
!(s->shutdown & SSL_SENT_SHUTDOWN)) {
ret = BIO_dgram_sctp_wait_for_dry(wbio);
if (ret < 0)
return -1;
if (ret == 0)
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 1,
NULL);
}
#endif
ret = ssl3_shutdown(s);
#ifndef OPENSSL_NO_SCTP
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 0, NULL);
#endif
return ret;
}示例5: dtls1_accept
//.........這裏部分代碼省略.........
}
s->type=SSL_ST_ACCEPT;
if (s->init_buf == NULL)
{
if ((buf=BUF_MEM_new()) == NULL)
{
ret= -1;
goto end;
}
if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH))
{
ret= -1;
goto end;
}
s->init_buf=buf;
}
if (!ssl3_setup_buffers(s))
{
ret= -1;
goto end;
}
s->init_num=0;
if (s->state != SSL_ST_RENEGOTIATE)
{
/* Ok, we now need to push on a buffering BIO so that
* the output is sent in a way that TCP likes :-)
* ...but not with SCTP :-)
*/
#ifndef OPENSSL_NO_SCTP
if (!BIO_dgram_is_sctp(SSL_get_wbio(s)))
#endif
if (!ssl_init_wbio_buffer(s,1)) { ret= -1; goto end; }
ssl3_init_finished_mac(s);
s->state=SSL3_ST_SR_CLNT_HELLO_A;
s->ctx->stats.sess_accept++;
}
else
{
/* s->state == SSL_ST_RENEGOTIATE,
* we will just send a HelloRequest */
s->ctx->stats.sess_accept_renegotiate++;
s->state=SSL3_ST_SW_HELLO_REQ_A;
}
break;
case SSL3_ST_SW_HELLO_REQ_A:
case SSL3_ST_SW_HELLO_REQ_B:
s->shutdown=0;
dtls1_clear_record_buffer(s);
dtls1_start_timer(s);
ret=ssl3_send_hello_request(s);
if (ret <= 0) goto end;
s->s3->tmp.next_state=SSL3_ST_SR_CLNT_HELLO_A;
s->state=SSL3_ST_SW_FLUSH;
s->init_num=0;
ssl3_init_finished_mac(s);
break;
示例6: dtls1_connect
//.........這裏部分代碼省略.........
BIO_set_retry_read(SSL_get_rbio(s));
ret = -1;
goto end;
}
s->state=s->d1->next_state;
break;
#endif
case SSL3_ST_CW_CLNT_HELLO_A:
case SSL3_ST_CW_CLNT_HELLO_B:
s->shutdown=0;
/* every DTLS ClientHello resets Finished MAC */
ssl3_init_finished_mac(s);
dtls1_start_timer(s);
ret=dtls1_client_hello(s);
if (ret <= 0) goto end;
if ( s->d1->send_cookie)
{
s->state=SSL3_ST_CW_FLUSH;
s->s3->tmp.next_state=SSL3_ST_CR_SRVR_HELLO_A;
}
else
s->state=SSL3_ST_CR_SRVR_HELLO_A;
s->init_num=0;
#ifndef OPENSSL_NO_SCTP
/* Disable buffering for SCTP */
if (!BIO_dgram_is_sctp(SSL_get_wbio(s)))
{
#endif
/* turn on buffering for the next lot of output */
if (s->bbio != s->wbio)
s->wbio=BIO_push(s->bbio,s->wbio);
#ifndef OPENSSL_NO_SCTP
}
#endif
break;
case SSL3_ST_CR_SRVR_HELLO_A:
case SSL3_ST_CR_SRVR_HELLO_B:
ret=ssl3_get_server_hello(s);
if (ret <= 0) goto end;
else
{
if (s->hit)
{
#ifndef OPENSSL_NO_SCTP
/* Add new shared key for SCTP-Auth,
* will be ignored if no SCTP used.
*/
snprintf((char*) labelbuffer, sizeof(DTLS1_SCTP_AUTH_LABEL),
DTLS1_SCTP_AUTH_LABEL);
SSL_export_keying_material(s, sctpauthkey,
sizeof(sctpauthkey), labelbuffer,
sizeof(labelbuffer), NULL, 0, 0);
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_ADD_AUTH_KEY,
sizeof(sctpauthkey), sctpauthkey);示例7: dtls1_read_bytes
/*-
* Return up to 'len' payload bytes received in 'type' records.
* 'type' is one of the following:
*
* - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
* - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
* - 0 (during a shutdown, no data has to be returned)
*
* If we don't have stored data to work from, read a SSL/TLS record first
* (possibly multiple records if we still don't have anything to return).
*
* This function must handle any surprises the peer may have for us, such as
* Alert records (e.g. close_notify) or renegotiation requests. ChangeCipherSpec
* messages are treated as if they were handshake messages *if* the |recd_type|
* argument is non NULL.
* Also if record payloads contain fragments too small to process, we store
* them until there is enough for the respective protocol (the record protocol
* may use arbitrary fragmentation and even interleaving):
* Change cipher spec protocol
* just 1 byte needed, no need for keeping anything stored
* Alert protocol
* 2 bytes needed (AlertLevel, AlertDescription)
* Handshake protocol
* 4 bytes needed (HandshakeType, uint24 length) -- we just have
* to detect unexpected Client Hello and Hello Request messages
* here, anything else is handled by higher layers
* Application data protocol
* none of our business
*/
int dtls1_read_bytes(SSL *s, int type, int *recvd_type, unsigned char *buf,
size_t len, int peek, size_t *readbytes)
{
int i, j, iret;
size_t n;
SSL3_RECORD *rr;
void (*cb) (const SSL *ssl, int type2, int val) = NULL;
if (!SSL3_BUFFER_is_initialised(&s->rlayer.rbuf)) {
/* Not initialized yet */
if (!ssl3_setup_buffers(s)) {
/* SSLfatal() already called */
return -1;
}
}
if ((type && (type != SSL3_RT_APPLICATION_DATA) &&
(type != SSL3_RT_HANDSHAKE)) ||
(peek && (type != SSL3_RT_APPLICATION_DATA))) {
SSLfatal(s, SSL_AD_INTERNAL_ERROR, SSL_F_DTLS1_READ_BYTES,
ERR_R_INTERNAL_ERROR);
return -1;
}
if (!ossl_statem_get_in_handshake(s) && SSL_in_init(s)) {
/* type == SSL3_RT_APPLICATION_DATA */
i = s->handshake_func(s);
/* SSLfatal() already called if appropriate */
if (i < 0)
return i;
if (i == 0)
return -1;
}
start:
s->rwstate = SSL_NOTHING;
/*-
* s->s3.rrec.type - is the type of record
* s->s3.rrec.data, - data
* s->s3.rrec.off, - offset into 'data' for next read
* s->s3.rrec.length, - number of bytes.
*/
rr = s->rlayer.rrec;
/*
* We are not handshaking and have no data yet, so process data buffered
* during the last handshake in advance, if any.
*/
if (SSL_is_init_finished(s) && SSL3_RECORD_get_length(rr) == 0) {
pitem *item;
item = pqueue_pop(s->rlayer.d->buffered_app_data.q);
if (item) {
#ifndef OPENSSL_NO_SCTP
/* Restore bio_dgram_sctp_rcvinfo struct */
if (BIO_dgram_is_sctp(SSL_get_rbio(s))) {
DTLS1_RECORD_DATA *rdata = (DTLS1_RECORD_DATA *)item->data;
BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_SET_RCVINFO,
sizeof(rdata->recordinfo), &rdata->recordinfo);
}
#endif
dtls1_copy_record(s, item);
OPENSSL_free(item->data);
pitem_free(item);
}
}
/* Check for timeout */
if (dtls1_handle_timeout(s) > 0) {
//.........這裏部分代碼省略.........
示例8: dtls1_process_buffered_records
int dtls1_process_buffered_records(SSL *s)
{
pitem *item;
SSL3_BUFFER *rb;
SSL3_RECORD *rr;
DTLS1_BITMAP *bitmap;
unsigned int is_next_epoch;
int replayok = 1;
item = pqueue_peek(s->rlayer.d->unprocessed_rcds.q);
if (item) {
/* Check if epoch is current. */
if (s->rlayer.d->unprocessed_rcds.epoch != s->rlayer.d->r_epoch)
return 1; /* Nothing to do. */
rr = RECORD_LAYER_get_rrec(&s->rlayer);
rb = RECORD_LAYER_get_rbuf(&s->rlayer);
if (SSL3_BUFFER_get_left(rb) > 0) {
/*
* We've still got data from the current packet to read. There could
* be a record from the new epoch in it - so don't overwrite it
* with the unprocessed records yet (we'll do it when we've
* finished reading the current packet).
*/
return 1;
}
/* Process all the records. */
while (pqueue_peek(s->rlayer.d->unprocessed_rcds.q)) {
dtls1_get_unprocessed_record(s);
bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch);
if (bitmap == NULL) {
/*
* Should not happen. This will only ever be NULL when the
* current record is from a different epoch. But that cannot
* be the case because we already checked the epoch above
*/
SSLfatal(s, SSL_AD_INTERNAL_ERROR,
SSL_F_DTLS1_PROCESS_BUFFERED_RECORDS,
ERR_R_INTERNAL_ERROR);
return 0;
}
#ifndef OPENSSL_NO_SCTP
/* Only do replay check if no SCTP bio */
if (!BIO_dgram_is_sctp(SSL_get_rbio(s)))
#endif
{
/*
* Check whether this is a repeat, or aged record. We did this
* check once already when we first received the record - but
* we might have updated the window since then due to
* records we subsequently processed.
*/
replayok = dtls1_record_replay_check(s, bitmap);
}
if (!replayok || !dtls1_process_record(s, bitmap)) {
if (ossl_statem_in_error(s)) {
/* dtls1_process_record called SSLfatal() */
return -1;
}
/* dump this record */
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
continue;
}
if (dtls1_buffer_record(s, &(s->rlayer.d->processed_rcds),
SSL3_RECORD_get_seq_num(s->rlayer.rrec)) < 0) {
/* SSLfatal() already called */
return 0;
}
}
}
/*
* sync epoch numbers once all the unprocessed records have been
* processed
*/
s->rlayer.d->processed_rcds.epoch = s->rlayer.d->r_epoch;
s->rlayer.d->unprocessed_rcds.epoch = s->rlayer.d->r_epoch + 1;
return 1;
}示例9: dtls1_read_bytes
/*-
* Return up to 'len' payload bytes received in 'type' records.
* 'type' is one of the following:
*
* - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
* - SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
* - 0 (during a shutdown, no data has to be returned)
*
* If we don't have stored data to work from, read a SSL/TLS record first
* (possibly multiple records if we still don't have anything to return).
*
* This function must handle any surprises the peer may have for us, such as
* Alert records (e.g. close_notify) or renegotiation requests. ChangeCipherSpec
* messages are treated as if they were handshake messages *if* the |recd_type|
* argument is non NULL.
* Also if record payloads contain fragments too small to process, we store
* them until there is enough for the respective protocol (the record protocol
* may use arbitrary fragmentation and even interleaving):
* Change cipher spec protocol
* just 1 byte needed, no need for keeping anything stored
* Alert protocol
* 2 bytes needed (AlertLevel, AlertDescription)
* Handshake protocol
* 4 bytes needed (HandshakeType, uint24 length) -- we just have
* to detect unexpected Client Hello and Hello Request messages
* here, anything else is handled by higher layers
* Application data protocol
* none of our business
*/
int dtls1_read_bytes(SSL *s, int type, int *recvd_type, unsigned char *buf,
int len, int peek)
{
int al, i, j, ret;
unsigned int n;
SSL3_RECORD *rr;
void (*cb) (const SSL *ssl, int type2, int val) = NULL;
if (!SSL3_BUFFER_is_initialised(&s->rlayer.rbuf)) {
/* Not initialized yet */
if (!ssl3_setup_buffers(s))
return (-1);
}
if ((type && (type != SSL3_RT_APPLICATION_DATA) &&
(type != SSL3_RT_HANDSHAKE)) ||
(peek && (type != SSL3_RT_APPLICATION_DATA))) {
SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR);
return -1;
}
/*
* check whether there's a handshake message (client hello?) waiting
*/
if ((ret = have_handshake_fragment(s, type, buf, len))) {
*recvd_type = SSL3_RT_HANDSHAKE;
return ret;
}
/*
* Now s->rlayer.d->handshake_fragment_len == 0 if
* type == SSL3_RT_HANDSHAKE.
*/
if (!ossl_statem_get_in_handshake(s) && SSL_in_init(s))
{
/* type == SSL3_RT_APPLICATION_DATA */
i = s->handshake_func(s);
if (i < 0)
return (i);
if (i == 0) {
SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE);
return (-1);
}
}
start:
s->rwstate = SSL_NOTHING;
/*-
* s->s3->rrec.type - is the type of record
* s->s3->rrec.data, - data
* s->s3->rrec.off, - offset into 'data' for next read
* s->s3->rrec.length, - number of bytes.
*/
rr = s->rlayer.rrec;
/*
* We are not handshaking and have no data yet, so process data buffered
* during the last handshake in advance, if any.
*/
if (SSL_is_init_finished(s) && SSL3_RECORD_get_length(rr) == 0) {
pitem *item;
item = pqueue_pop(s->rlayer.d->buffered_app_data.q);
if (item) {
#ifndef OPENSSL_NO_SCTP
/* Restore bio_dgram_sctp_rcvinfo struct */
if (BIO_dgram_is_sctp(SSL_get_rbio(s))) {
DTLS1_RECORD_DATA *rdata = (DTLS1_RECORD_DATA *)item->data;
BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_SET_RCVINFO,
sizeof(rdata->recordinfo), &rdata->recordinfo);
//.........這裏部分代碼省略.........
示例10: dtls1_accept
int
dtls1_accept(SSL *s)
{
void (*cb)(const SSL *ssl, int type, int val) = NULL;
unsigned long alg_k;
int ret = -1;
int new_state, state, skip = 0;
int listen;
#ifndef OPENSSL_NO_SCTP
unsigned char sctpauthkey[64];
char labelbuffer[sizeof(DTLS1_SCTP_AUTH_LABEL)];
#endif
ERR_clear_error();
errno = 0;
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
listen = s->d1->listen;
/* init things to blank */
s->in_handshake++;
if (!SSL_in_init(s) || SSL_in_before(s))
SSL_clear(s);
s->d1->listen = listen;
#ifndef OPENSSL_NO_SCTP
/* Notify SCTP BIO socket to enter handshake
* mode and prevent stream identifier other
* than 0. Will be ignored if no SCTP is used.
*/
BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE,
s->in_handshake, NULL);
#endif
if (s->cert == NULL) {
SSLerr(SSL_F_DTLS1_ACCEPT, SSL_R_NO_CERTIFICATE_SET);
return (-1);
}
for (;;) {
state = s->state;
switch (s->state) {
case SSL_ST_RENEGOTIATE:
s->renegotiate = 1;
/* s->state=SSL_ST_ACCEPT; */
case SSL_ST_BEFORE:
case SSL_ST_ACCEPT:
case SSL_ST_BEFORE|SSL_ST_ACCEPT:
case SSL_ST_OK|SSL_ST_ACCEPT:
s->server = 1;
if (cb != NULL)
cb(s, SSL_CB_HANDSHAKE_START, 1);
if ((s->version & 0xff00) != (DTLS1_VERSION & 0xff00)) {
SSLerr(SSL_F_DTLS1_ACCEPT, ERR_R_INTERNAL_ERROR);
return -1;
}
s->type = SSL_ST_ACCEPT;
if (s->init_buf == NULL) {
BUF_MEM *buf;
if ((buf = BUF_MEM_new()) == NULL) {
ret = -1;
goto end;
}
if (!BUF_MEM_grow(buf, SSL3_RT_MAX_PLAIN_LENGTH)) {
BUF_MEM_free(buf);
ret = -1;
goto end;
}
s->init_buf = buf;
}
if (!ssl3_setup_buffers(s)) {
ret = -1;
goto end;
}
s->init_num = 0;
if (s->state != SSL_ST_RENEGOTIATE) {
/* Ok, we now need to push on a buffering BIO so that
* the output is sent in a way that TCP likes :-)
* ...but not with SCTP :-)
*/
#ifndef OPENSSL_NO_SCTP
if (!BIO_dgram_is_sctp(SSL_get_wbio(s)))
#endif
if (!ssl_init_wbio_buffer(s, 1)) {
ret = -1;
goto end;
}
//.........這裏部分代碼省略.........