C++ BIOS_start函數代碼示例

/* ARGSUSED */
int main(Int argc, Char * argv[])
{
    IRES_Status status;
    Int         size = 0;

    FCSettings_init();
    Diags_setMask(FCSETTINGS_MODNAME"+EX1234567");
    Diags_setMask("xdc.runtime.Main+EX1234567");
    Diags_setMask("ti.sdo.fc.%+EX1234567");

    Log_print0(Diags_ENTRY, "[+E] _main> Enter");

    status = RMAN_init();
    if (IRES_OK != status) {
        Log_print1(Diags_USER7, "[+7] main> RMAN_init() failed [%d]",
                   (IArg)status);
        System_abort("RMAN_init() failed, aborting...\n");
    }

    Log_print0(Diags_EXIT, "[+X] main> Exit");

    BIOS_start();

    return(0);
}

/*
 *  ======== main ========
 */
int main()
{
    /* Register Application callback to trap asserts raised in the Stack */
    RegisterAssertCback(AssertHandler);

    PIN_init(BoardGpioInitTable);

#ifndef POWER_SAVING
    /* Set constraints for Standby, powerdown and idle mode */
    Power_setConstraint(Power_SB_DISALLOW);
    Power_setConstraint(Power_IDLE_PD_DISALLOW);
#endif //POWER_SAVING

    /* Initialize ICall module */
    ICall_init();

    /* Start tasks of external images - Priority 5 */
    ICall_createRemoteTasks();

    /* Kick off profile - Priority 3 */
    GAPCentralRole_createTask();

    /* Kick off application - Priority 1 */
    security_examples_central_createTask();

    /* enable interrupts and start SYS/BIOS */
    BIOS_start();

    return 0;
}

Int main(Int argc, Char* argv[])
{
    Error_Block     eb;
    Task_Params     taskParams;
    Registry_Result result;

    Log_print0(Diags_ENTRY, "--> main:");

    /* must initialize the error block before using it */
    Error_init(&eb);

    /* create main thread (interrupts not enabled in main on BIOS) */
    Task_Params_init(&taskParams);
    taskParams.instance->name = "smain";
    taskParams.stackSize = 0x1000;
    Task_create(smain, &taskParams, &eb);

    if (Error_check(&eb)) {
        System_abort("main: failed to create application startup thread");
    }

    /* register with xdc.runtime to get a diags mask */
    result = Registry_addModule(&Registry_CURDESC, MODULE_NAME);
    Assert_isTrue(result == Registry_SUCCESS, (Assert_Id)NULL);

    /* start scheduler, this never returns */
    BIOS_start();

    /* should never get here */
    Log_print0(Diags_EXIT, "<-- main:");
    return (0);
}

Int main (void)
{
    Types_FreqHz timer_freq;
    Types_Timestamp64 now;
    uint64_t start_time, current_time;
    double elapsed_duration_seconds;

    TimestampProvider_getFreq (&timer_freq);

    printf ("Starting timer test\n");

    TimestampProvider_get64 (&now);
    start_time = ((uint64_t) now.hi << 32) + now.lo;

    do
    {
        TimestampProvider_get64 (&now);
        current_time = ((uint64_t) now.hi << 32) + now.lo;
        elapsed_duration_seconds = (double) (current_time - start_time) / timer_freq.lo;
    } while (elapsed_duration_seconds < 10);

    printf ("Timer test complete\n");

    BIOS_start();    /* does not return */
    return(0);
}

Int main(Int argc, Char* argv[]) {

	/*
	// Because MSMC memory cannot be non-cacheable, a new entry is added to
	// the memory map as follows:
	//     name            origin    length
	// SHARED_NO_CACHE     80000000   80000000
	// Cache is disabled for this new memory range
	// Then a new section is created for this memory range (cf .cfg). Memory
	// translation is then used to make the region beginning fall into the
	// MSMCSRAM. The rest naturally falls into DDR3.
	// "translate" 2MB (0x14) from 0x80000000 to 0x00c200000 using the MPAX number 3
	set_MPAX(3, 0x80000, 0x00c200, 0x14, CACHEABLE);
	*/

	// Disable caching from 0x80000000 to 0xFFFFFFFF
	if(!CACHEABLE){
		int index;
		for (index = 0x80; index <= 0xFF; index++) {
			CACHE_disableCaching(index);
		}
	}


	BIOS_start();

	return (0);
}

/*
 *  ======== main ========
 */
int main(void)
{
    Task_Params taskParams;

    /* Call board init functions */
    Board_initGeneral();
    Board_initGPIO();
    Board_initSDSPI();

    /* Construct file copy Task thread */
    Task_Params_init(&taskParams);
    taskParams.stackSize = TASKSTACKSIZE;
    taskParams.stack = &task0Stack;
    Task_construct(&task0Struct, (Task_FuncPtr)taskFxn, &taskParams, NULL);

    /* Turn on user LED */
    GPIO_write(Board_LED0, Board_LED_ON);

    System_printf("Starting the FatSD Raw example\n");

    /* Start BIOS */
    BIOS_start();

    return (0);
}

/*
 *  ======== main ========
 */
Void main()
{       
    Swi_Params swiParams;
    Task_Params taskParams;
    Clock_Params clkParams;

    Swi_Params_init(&swiParams);
    swiParams.arg0 = 1;
    swiParams.arg1 = 0;
    swiParams.priority = 2;
    swiParams.trigger = 0;

    swi0 = Swi_create(swi0Fxn, &swiParams, NULL);

    swiParams.arg0 = 2;
    swiParams.arg1 = 0;
    swiParams.priority = 1;
    swiParams.trigger = 3;

    swi1 = Swi_create(swi1Fxn, &swiParams, NULL);

    Task_Params_init(&taskParams);
    taskParams.priority = 1;
    Task_create (tsk0Fxn, &taskParams, NULL);

    Clock_Params_init(&clkParams);
    clkParams.startFlag = TRUE;
    Clock_create(clk0Fxn, 2, &clkParams, NULL);

    sem0 = Semaphore_create(0, NULL, NULL);

    BIOS_start();
}

Int main(Int argc, Char* argv[])
{
    Error_Block eb;
    Task_Params taskParams;


    Log_print3(Diags_ENTRY,
        "--> %s: (argc: %d, argv: 0x%x)", (IArg)FXNN, (IArg)argc, (IArg)argv);

    /* must initialize the error block before using it */
    Error_init(&eb);

    /* initialize ipc layer */
    Ipc_start();

    /* create main thread (interrupts not enabled in main on BIOS) */
    Task_Params_init(&taskParams);
    taskParams.instance->name = "AppMain_main__P";
    taskParams.arg0 = (UArg)argc;
    taskParams.arg1 = (UArg)argv;
    taskParams.stackSize = 0x4000;
    Task_create(AppMain_main__P, &taskParams, &eb);

    if (Error_check(&eb)) {
        System_abort("main() failed to create application startup thread");
    }

    /* start scheduler, this never returns */
    BIOS_start();
    
    /* should never get here */
    Log_print1(Diags_EXIT, "<-- %s: should never get here", (IArg)FXNN);
    return(0);
}

/*
 *  ======== main ========
 *  Synchronizes all processors (in Ipc_start) and calls BIOS_start
 */
Int main(Int argc, Char* argv[])
{
    Int status;

    nextProcId = (MultiProc_self() + 1) % MultiProc_getNumProcessors();

    System_printf("main: MultiProc id = %d\n", MultiProc_self());
    System_printf("main: MultiProc name = %s\n",
                  MultiProc_getName(MultiProc_self()));

    /* Generate queue names based on own proc ID and total number of procs */
    System_sprintf(localQueueName, "%s", MultiProc_getName(MultiProc_self()));
    System_sprintf(nextQueueName, "%s",  MultiProc_getName(nextProcId));

    /*
     *  Ipc_start() calls Ipc_attach() to synchronize all remote processors
     *  because 'Ipc.procSync' is set to 'Ipc.ProcSync_ALL' in *.cfg
     */
    status = Ipc_start();
    if (status < 0) {
        System_abort("Ipc_start failed\n");
    }

    BIOS_start();

    return (0);
}

int main() {
	// initialize the board
	(void) Board_initGeneral(120 * 1000 * 1000);

	// initialize i2c
	initializeI2C();

	// setup i2c task, who does the work
	(void) setup_I2C_Task();

	// initialize uart
	initializeUART();

	// setup uart task, printing the output
	(void) setup_UART_Task();

	// setup the events which are used in combination with the queues
	(void) setup_Events();

	// initialize interrupts
	initializeInterrupts();

	// setup the interrupts - both for the ALTITUDE CLICK module and the USR_SW
	setup_Interrupts();

	System_printf("Start BIOS\n");
	System_flush();

	/* Start BIOS */
	BIOS_start();

}

int main(void)
{
    Task_Params taskParams;

    /* Call board init functions */
    Board_initGeneral();
    memoryInit(spiHandle, 6250);
    // Board_initWatchdog();

    /* Construct heartBeat Task  thread */
    Task_Params_init(&taskParams);
    taskParams.arg0 = 1000000 / Clock_tickPeriod;
    taskParams.stackSize = TASKSTACKSIZE;
    taskParams.stack = &task0Stack;
    Task_construct(&task0Struct, (Task_FuncPtr)heartBeatFxn, &taskParams, NULL);

    /* Open LED pins */
    ledPinHandle = PIN_open(&ledPinState, ledPinTable);
    if(!ledPinHandle) {
        System_abort("Error initializing board LED pins\n");
    }

    //IOCPortConfigureSet(PIN_SPI_MOSI, PORTID, PIN-CONFIG); // oklart om och hur denna funkar.
    //IOCPortConfigureSet(DIOn, PORTID, PIN-CONFIG);
    //PIN_setOutputValue(ledPinHandle, Board_LED1, 1);

    /* Start BIOS */
    BIOS_start();

    return (0);
}

/*************************************************************************
 * main()
 * Entry point for the application.
 ************************************************************************/
int main()
{
    /* Start the BIOS 6 Scheduler - it will kick off our main thread ledPlayTask() */
    platform_write("Start BIOS 6\n");
    //Timer_start(timer1);
    BIOS_start();
}

/*
 *  ======== main ========
 */
int main()
{
  PIN_init(BoardGpioInitTable);

  //enable iCache prefetching
   VIMSConfigure(VIMS_BASE, TRUE, TRUE);
   
   // Enable cache
   VIMSModeSet(VIMS_BASE, VIMS_MODE_ENABLED);

#ifndef POWER_SAVING
    /* Set constraints for Standby, powerdown and idle mode */
    Power_setConstraint  (Power_SB_DISALLOW);
    Power_setConstraint  (Power_IDLE_PD_DISALLOW);
#endif //POWER_SAVING

    /* Initialize ICall module */
    ICall_init();

    /* Start tasks of external images - Priority 5 */
    ICall_createRemoteTasks();

    /* Kick off profile - Priority 3 */
    GAPRole_createTask();

    /* Kick off application - Priority 1 */
    ProximityTag_createTask();

    /* enable interrupts and start SYS/BIOS */
    BIOS_start();
    
    return 0;
}

/*
 *  ======== main ========
 */
Int main(Int argc, Char* argv[])
{  
    selfId = MultiProc_self();
    
    System_printf("Core (\"%s\") starting\n", MultiProc_getName(selfId));
    
    if (numCores == 0) {
        numCores = MultiProc_getNumProcessors();
    }
    
    attachAll(numCores);
    
    System_sprintf(localQueueName, "CORE%d", selfId);
    System_sprintf(nextQueueName, "CORE%d", 
        ((selfId + 1) % numCores));
    System_sprintf(prevQueueName, "CORE%d", 
        (selfId - 1 + numCores)
            % numCores);
            
    /* Create a message queue. */
    messageQ = MessageQ_create(localQueueName, NULL);    
    if (messageQ == NULL) {
        System_abort("MessageQ_create failed\n" );
    }
 
    BIOS_start();

    return (0);
}

void osStartKernel(void)
{
   //The scheduler is now running
   running = TRUE;
   //Start the scheduler
   BIOS_start();
}