C++ AnscAcquireLock函數代碼示例

本文整理匯總了C++中AnscAcquireLock函數的典型用法代碼示例。如果您正苦於以下問題：C++ AnscAcquireLock函數的具體用法？C++ AnscAcquireLock怎麽用？C++ AnscAcquireLock使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了AnscAcquireLock函數的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: AnscAcquireLock

ANSC_STATUS
BbhmDiagipSetStopTime
    (
        ANSC_HANDLE                 hThisObject,
        USHORT                      SeqNumber,
        ULONG                       PktSize,
        UCHAR                       TTL,
        ULONG                       StopTime
    )
{
    ANSC_STATUS                     returnStatus = ANSC_STATUS_FAILURE;
    PBBHM_DIAG_IP_PING_OBJECT       pMyObject    = (PBBHM_DIAG_IP_PING_OBJECT)hThisObject;
    PBBHM_IP_PING_PROPERTY          pProperty    = (PBBHM_IP_PING_PROPERTY        )&pMyObject->Property;
    PBBHM_IP_PING_TDO_OBJECT        pStateTimer  = (PBBHM_IP_PING_TDO_OBJECT      )pMyObject->hStateTimer;
    PBBHM_IP_PING_SINK_OBJECT       pSink        = (PBBHM_IP_PING_SINK_OBJECT     )pMyObject->hSinkObject;
    PSINGLE_LINK_ENTRY              pSLinkEntry  = NULL;
    PBBHM_IP_PING_ECHO_ENTRY        pEchoEntry   = NULL;
    PBBHM_IP_PING_ECHO_ENTRY        pMEchoEntry  = NULL;
    ULONG                           ulHashIndex  = SeqNumber % MAX_ECHO_TABLE_SIZE;

    AnscAcquireLock(&pMyObject->EchoTableLock);
    pSLinkEntry = AnscSListGetFirstEntry(&pMyObject->EchoTable[ulHashIndex]);

    while ( pSLinkEntry )
    {
        pEchoEntry = (PBBHM_IP_PING_ECHO_ENTRY)ACCESS_BBHM_IP_PING_ECHO_ENTRY(pSLinkEntry);
        pSLinkEntry = AnscSListGetNextEntry(pSLinkEntry);

        if ( pEchoEntry->SeqId == SeqNumber )
        {
            if ( (StopTime - pEchoEntry->StartTime <= pProperty->TimeOut) && (pEchoEntry->StopTime == 0) )
            {
                returnStatus = ANSC_STATUS_SUCCESS;
                pEchoEntry->StopTime    = StopTime;
                pEchoEntry->TTL         = TTL;
                pEchoEntry->PktSize     = PktSize;
                pEchoEntry->ICMPType    = 0;
                pMEchoEntry = (PBBHM_IP_PING_ECHO_ENTRY)AnscAllocateMemory(sizeof(BBHM_IP_PING_ECHO_ENTRY));
                if ( pMEchoEntry )
                {
                    pMEchoEntry->StartTime = pEchoEntry->StartTime;
                    pMEchoEntry->StopTime  = pEchoEntry->StopTime;
                    pMEchoEntry->SeqId     = pEchoEntry->SeqId;
                    pMEchoEntry->PktSize   = pEchoEntry->PktSize;
                    pMEchoEntry->TTL       = pEchoEntry->TTL;
                    pMEchoEntry->ICMPType  = pEchoEntry->ICMPType;
                    AnscAcquireLock(&pMyObject->MiddleResultLock);
                    AnscSListPushEntryAtBack(&pMyObject->MiddleResult, &pMEchoEntry->Linkage);
                    AnscReleaseLock(&pMyObject->MiddleResultLock);
                }
            }

            break;
        }
    }

    AnscReleaseLock(&pMyObject->EchoTableLock);

    return  returnStatus;
}

開發者ID:davekimble，項目名稱:TestAndDiagnostic，代碼行數:60，代碼來源:bbhm_diagip_operation.c

示例2: AnscAcquireLock

ANSC_STATUS
HttpSpoDestroyPsoPool
    (
        ANSC_HANDLE                 hThisObject
    )
{
    ANSC_STATUS                     returnStatus = ANSC_STATUS_SUCCESS;
    PHTTP_SIMPLE_PROXY_OBJECT       pMyObject    = (PHTTP_SIMPLE_PROXY_OBJECT  )hThisObject;
    PHTTP_SIMPLE_PROXY_PROPERTY     pProperty    = (PHTTP_SIMPLE_PROXY_PROPERTY)&pMyObject->Property;
    PHTTP_PROXY_SESSION_OBJECT      pSession     = NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry  = NULL;

    AnscAcquireLock(&pMyObject->PsoSListLock);

    pSLinkEntry = AnscSListPopEntry(&pMyObject->PsoSList);

    while ( pSLinkEntry )
    {
        pSession    = ACCESS_HTTP_PROXY_SESSION_OBJECT(pSLinkEntry);
        pSLinkEntry = AnscSListPopEntry(&pMyObject->PsoSList);

        pSession->Remove((ANSC_HANDLE)pSession);
    }

    AnscReleaseLock(&pMyObject->PsoSListLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:rdkcmf，項目名稱:rdkb-CcspCommonLibrary，代碼行數:28，代碼來源:http_spo_management.c

示例3: AnscAcquireLock

ANSC_STATUS
HttpBmoDelAllHfos
    (
        ANSC_HANDLE                 hThisObject
    )
{
    ANSC_STATUS                     returnStatus = ANSC_STATUS_SUCCESS;
    PHTTP_BASIC_MESSAGE_OBJECT      pMyObject    = (PHTTP_BASIC_MESSAGE_OBJECT)hThisObject;
    PHTTP_HFP_INTERFACE             pHfpIf       = (PHTTP_HFP_INTERFACE       )pMyObject->hHfpIf;
    PHTTP_HEADER_FIELD              pHttpHfo     = NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry  = NULL;
    ULONG                           i            = 0;

    AnscAcquireLock(&pMyObject->HfoTableLock);

    for ( i = 0; i < HTTP_BMO_HFO_TABLE_SIZE; i++ )
    {
        pSLinkEntry = AnscQueuePopEntry(&pMyObject->HfoTable[i]);

        while ( pSLinkEntry )
        {
            pHttpHfo    = ACCESS_HTTP_HEADER_FIELD(pSLinkEntry);
            pSLinkEntry = AnscQueuePopEntry(&pMyObject->HfoTable[i]);

            AnscFreeMemory(pHttpHfo);
        }
    }

    AnscReleaseLock(&pMyObject->HfoTableLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:rdkcmf，項目名稱:rdkb-CcspCommonLibrary，代碼行數:32，代碼來源:http_bmo_header.c

示例4: AnscFreeMemory

ANSC_STATUS
DslhWmpdoReset
(
    ANSC_HANDLE                 hThisObject
)
{
    ANSC_STATUS                     returnStatus   = ANSC_STATUS_SUCCESS;
    PDSLH_WMP_DATABASE_OBJECT       pMyObject      = (PDSLH_WMP_DATABASE_OBJECT  )hThisObject;
    PDSLH_WMP_DATABASE_PROPERTY     pProperty      = (PDSLH_WMP_DATABASE_PROPERTY)&pMyObject->Property;
    PDSLH_OBJ_RECORD_OBJECT         pRootObjRecord = (PDSLH_OBJ_RECORD_OBJECT    )pMyObject->hRootObjRecord;
    PDSLH_OBJ_ENTITY_OBJECT         pRootObjEntity = (PDSLH_OBJ_ENTITY_OBJECT    )pMyObject->hRootObjEntity;
    PDSLH_WMPDO_MONITOR_PARAM       pMonitorParam  = (PDSLH_WMPDO_MONITOR_PARAM  )NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry    = (PSINGLE_LINK_ENTRY         )NULL;

    pMyObject->ResetObjVarArray(hThisObject);

    if ( pMyObject->LockedEntity )
    {
        AnscFreeMemory(pMyObject->LockedEntity);

        pMyObject->LockedEntity = NULL;
    }

    if ( pMyObject->pRootObjName)
    {
        AnscFreeMemory(pMyObject->pRootObjName);

        pMyObject->pRootObjName = NULL;
    }

    if ( pRootObjRecord )
    {
        pRootObjRecord->Remove((ANSC_HANDLE)pRootObjRecord);

        pMyObject->hRootObjRecord = (ANSC_HANDLE)NULL;
    }

    if ( pRootObjEntity )
    {
        pRootObjEntity->Remove((ANSC_HANDLE)pRootObjEntity);

        pMyObject->hRootObjEntity = (ANSC_HANDLE)NULL;
    }

    AnscAcquireLock(&pMyObject->MpoQueueLock);

    pSLinkEntry = AnscQueuePopEntry(&pMyObject->MpoQueue);

    while ( pSLinkEntry )
    {
        pMonitorParam = ACCESS_DSLH_WMPDO_MONITOR_PARAM(pSLinkEntry);
        pSLinkEntry   = AnscQueuePopEntry(&pMyObject->MpoQueue);

        DslhWmpdoFreeMonitorParam(pMonitorParam);
    }

    AnscReleaseLock(&pMyObject->MpoQueueLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:davekimble，項目名稱:CcspCommonLibrary，代碼行數:60，代碼來源:dslh_wmpdo_states.c

示例5: AnscAcquireLock

ANSC_STATUS
HttpAuthcoClearAllAuthInfo
    (
        ANSC_HANDLE                 hThisObject
    )
{
    PHTTP_AUTH_CLIENT_OBJECT        pMyObject    = (PHTTP_AUTH_CLIENT_OBJECT)hThisObject;
    PHTTP_AUTHO_INFO                pAuthInfo    = NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry  = NULL;

    AnscAcquireLock(&pMyObject->AuthInfoListLock);

    /* remove auth info */
    pSLinkEntry = AnscSListPopEntry(&pMyObject->AuthInfoList);
    while (pSLinkEntry)
    {
        pAuthInfo   = ACCESS_HTTP_AUTHO_INFO_OBJECT(pSLinkEntry);
        pSLinkEntry = AnscSListPopEntry(&pMyObject->AuthInfoList);

        HttpAuthInfoRemove(pAuthInfo);
    }

    AnscReleaseLock(&pMyObject->AuthInfoListLock);

    return ANSC_STATUS_SUCCESS;
}

開發者ID:davekimble，項目名稱:CcspCommonLibrary，代碼行數:26，代碼來源:http_authco_management.c

示例6: AnscAcquireLock

BOOLEAN
BbhmDiageoCheckCanStart
    (
        ANSC_HANDLE                 hThisObject
    )
{
    ANSC_STATUS                     returnStatus    = ANSC_STATUS_SUCCESS;
    PBBHM_DIAG_EXEC_OBJECT          pMyObject       = (PBBHM_DIAG_EXEC_OBJECT)hThisObject;
    PDSLH_DIAG_INFO_BASE            pDiagInfo       = (PDSLH_DIAG_INFO_BASE  )pMyObject->hDslhDiagInfo;
    BOOLEAN                         bCanStart       = FALSE;

    AnscAcquireLock(&pMyObject->AccessLock);

    if ( pMyObject->bResultQueryRunning )
    {
        bCanStart = FALSE;
    }
    else
    {
        bCanStart = TRUE;
    }

    AnscReleaseLock(&pMyObject->AccessLock);

    return  bCanStart;
}

開發者ID:davekimble，項目名稱:TestAndDiagnostic，代碼行數:26，代碼來源:bbhm_diageo_process.c

示例7: AnscAcquireLock

ANSC_STATUS
Bmc2EnvcoDelAllCommandProperties
    (
        ANSC_HANDLE                 hThisObject
    )
{
    ANSC_STATUS                     returnStatus         = ANSC_STATUS_SUCCESS;
    PBMC2_ENV_CONTROLLER_OBJECT     pMyObject            = (PBMC2_ENV_CONTROLLER_OBJECT  )hThisObject;
    PBMC2_ENV_CONTROLLER_PROPERTY   pProperty            = (PBMC2_ENV_CONTROLLER_PROPERTY)&pMyObject->Property;
    PBMC2_COMMAND_PROPERTY          pBmc2CommandProperty = (PBMC2_COMMAND_PROPERTY       )NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry          = (PSINGLE_LINK_ENTRY           )NULL;
    ULONG                           i                    = 0;

    AnscAcquireLock(&pMyObject->CompoTableLock);

    for ( i = 0; i < BMC2_ENVCO_COMPO_TABLE_SIZE; i++ )
    {
        pSLinkEntry = AnscQueuePopEntry(&pMyObject->CompoTable[i]);

        while ( pSLinkEntry )
        {
            pBmc2CommandProperty = ACCESS_BMC2_COMMAND_PROPERTY(pSLinkEntry);
            pSLinkEntry          = AnscQueuePopEntry(&pMyObject->CompoTable[i]);

            Bmc2FreeCommandProperty(pBmc2CommandProperty);
        }
    }

    AnscReleaseLock(&pMyObject->CompoTableLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:rdkcmf，項目名稱:rdkb-CcspCommonLibrary，代碼行數:32，代碼來源:bmc2_envco_management.c

示例8: AnscAcquireLock

ANSC_STATUS
PsmSysroSysRamEnableFileSync
    (
        ANSC_HANDLE                 hThisObject,
        BOOL                        bEnabled
    )
{
    ANSC_STATUS                     returnStatus       = ANSC_STATUS_SUCCESS;
    PPSM_SYS_REGISTRY_OBJECT       pMyObject          = (PPSM_SYS_REGISTRY_OBJECT  )hThisObject;
    PPSM_SYS_REGISTRY_PROPERTY     pProperty          = (PPSM_SYS_REGISTRY_PROPERTY)&pMyObject->Property;
    PSYS_INFO_REPOSITORY_OBJECT     pSysInfoRepository = (PSYS_INFO_REPOSITORY_OBJECT)pMyObject->hSysInfoRepository;
    PSYS_IRA_INTERFACE              pIraIf             = (PSYS_IRA_INTERFACE         )pSysInfoRepository->GetIraIf((ANSC_HANDLE)pSysInfoRepository);

    AnscAcquireLock(&pMyObject->AccessLock);
//CcspTraceInfo(("\n##PsmSysroSysRamEnableFileSync() begins##\n"));
    if ( bEnabled )
    {
        pMyObject->FileSyncRefCount--;
    }
    else
    {
        pMyObject->FileSyncRefCount++;
    }

    AnscReleaseLock(&pMyObject->AccessLock);
//CcspTraceInfo(("\n##PsmSysroSysRamEnableFileSync() ENDs##\n"));
    return  ANSC_STATUS_SUCCESS;
}

開發者ID:rdkcmf，項目名稱:rdkb-CcspPsm，代碼行數:28，代碼來源:psm_sysro_sysramif.c

示例9: AnscAcquireLock

ANSC_STATUS
AnscLpccoDelAllPendingCalls
    (
        ANSC_HANDLE                 hThisObject
    )
{
    ANSC_STATUS                     returnStatus = ANSC_STATUS_SUCCESS;
    PANSC_LPC_CONNECTOR_OBJECT      pMyObject    = (PANSC_LPC_CONNECTOR_OBJECT)hThisObject;
    PANSC_LPCCO_PENDING_CALL        pPendingCall = (PANSC_LPCCO_PENDING_CALL  )NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry  = (PSINGLE_LINK_ENTRY        )NULL;

    AnscAcquireLock(&pMyObject->PcallQueueLock);

    pSLinkEntry = AnscQueuePopEntry(&pMyObject->PcallQueue);

    while ( pSLinkEntry )
    {
        pPendingCall = ACCESS_ANSC_LPCCO_PENDING_CALL(pSLinkEntry);
        pSLinkEntry  = AnscQueuePopEntry(&pMyObject->PcallQueue);

        AnscSetEvent  (pPendingCall->CallEvent);
        AnscFreeMemory(pPendingCall);
    }

    AnscReleaseLock(&pMyObject->PcallQueueLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:rdkcmf，項目名稱:rdkb-CcspCommonLibrary，代碼行數:28，代碼來源:ansc_lpcco_management.c

示例10: AnscHashString

ANSC_STATUS
Bmc2EnvcoAddCommandProperty
    (
        ANSC_HANDLE                 hThisObject,
        ANSC_HANDLE                 hCommandProperty,
        ANSC_HANDLE                 hCommandInsertBefore
    )
{
    ANSC_STATUS                     returnStatus         = ANSC_STATUS_SUCCESS;
    PBMC2_ENV_CONTROLLER_OBJECT     pMyObject            = (PBMC2_ENV_CONTROLLER_OBJECT  )hThisObject;
    PBMC2_ENV_CONTROLLER_PROPERTY   pProperty            = (PBMC2_ENV_CONTROLLER_PROPERTY)&pMyObject->Property;
    PBMC2_COMMAND_PROPERTY          pBmc2CommandProperty = (PBMC2_COMMAND_PROPERTY       )hCommandProperty;
    PBMC2_COMMAND_PROPERTY          pBmc2CommandPropRef  = (PBMC2_COMMAND_PROPERTY       )hCommandInsertBefore;
    ULONG                           ulHashIndex          = AnscHashString(pBmc2CommandProperty->CommandName, AnscSizeOfString(pBmc2CommandProperty->CommandName), BMC2_ENVCO_COMPO_TABLE_SIZE);

    AnscAcquireLock   (&pMyObject->CompoTableLock);
    if ( !pBmc2CommandPropRef )
    {
        AnscQueuePushEntry(&pMyObject->CompoTable[ulHashIndex], &pBmc2CommandProperty->Linkage);
    }
    else
    {
        /* This makes sure that the command property with more specific domain pattern name appears before those
         * with less specific name. So when the command is issued, framework always tries to match domain
         * with longer domain name, therefore there will be no mismatch.
         */
        AnscQueuePushEntryBefore(&pMyObject->CompoTable[ulHashIndex], &pBmc2CommandProperty->Linkage, &pBmc2CommandPropRef->Linkage);
    }
    AnscReleaseLock   (&pMyObject->CompoTableLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:rdkcmf，項目名稱:rdkb-CcspCommonLibrary，代碼行數:32，代碼來源:bmc2_envco_management.c

示例11: AnscAcquireLock

ANSC_STATUS
TlsSmoDelAllSessions
(
    ANSC_HANDLE                 hThisObject
)
{
    PTLS_SESSION_MANAGER_OBJECT     pMyObject     = (PTLS_SESSION_MANAGER_OBJECT  )hThisObject;
    PTLS_SESSION_ENTRY_OBJECT       pSessionEntry = (PTLS_SESSION_ENTRY_OBJECT    )NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry   = (PSINGLE_LINK_ENTRY           )NULL;
    ULONG                           i             = 0;

    AnscAcquireLock(&pMyObject->SeoTableLock);

    for ( i = 0; i < TLS_SMO_SEO_TABLE_SIZE; i++ )
    {
        pSLinkEntry = AnscQueuePopEntry(&pMyObject->SeoTable[i]);

        while ( pSLinkEntry )
        {
            pSessionEntry = ACCESS_TLS_SESSION_ENTRY_OBJECT(pSLinkEntry);
            pSLinkEntry   = AnscQueuePopEntry(&pMyObject->SeoTable[i]);

            pSessionEntry->Remove((ANSC_HANDLE)pSessionEntry);
        }
    }

    AnscReleaseLock(&pMyObject->SeoTableLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:davekimble，項目名稱:CcspCommonLibrary，代碼行數:30，代碼來源:tls_smo_management.c

示例12: AnscSizeOfString

ANSC_STATUS
HttpFcoAddFormElement
    (
        ANSC_HANDLE                 hThisObject,
        ANSC_HANDLE                 hFeo
    )
{
    ANSC_STATUS                     returnStatus  = ANSC_STATUS_SUCCESS;
    PHTTP_FORM_CONTENT_OBJECT       pMyObject     = (PHTTP_FORM_CONTENT_OBJECT)hThisObject;
    PHTTP_HFP_INTERFACE             pHfpIf        = (PHTTP_HFP_INTERFACE      )pMyObject->hHfpIf;
    PHTTP_FORM_ELEMENT              pFormElement  = (PHTTP_FORM_ELEMENT       )hFeo;
    ULONG                           ulHashIndex   = 0;

    ulHashIndex =
        AnscHashString
            (
                pFormElement->Name,
                AnscSizeOfString(pFormElement->Name),
                HTTP_FCO_FEO_TABLE_SIZE
            );

    pFormElement->FormIndex = pMyObject->FormIndex++;
    pFormElement->HashIndex = ulHashIndex;

    AnscAcquireLock   (&pMyObject->FeoTableLock);
    AnscQueuePushEntry(&pMyObject->FeoTable[ulHashIndex], &pFormElement->Linkage);
    AnscReleaseLock   (&pMyObject->FeoTableLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:davekimble，項目名稱:CcspCommonLibrary，代碼行數:30，代碼來源:http_fco_management.c

示例13: AnscQueuePopEntryByLink

ANSC_STATUS
HttpFcoDelFormElement
    (
        ANSC_HANDLE                 hThisObject,
        char*                       name
    )
{
    ANSC_STATUS                     returnStatus  = ANSC_STATUS_SUCCESS;
    PHTTP_FORM_CONTENT_OBJECT       pMyObject     = (PHTTP_FORM_CONTENT_OBJECT)hThisObject;
    PHTTP_HFP_INTERFACE             pHfpIf        = (PHTTP_HFP_INTERFACE      )pMyObject->hHfpIf;
    PHTTP_FORM_ELEMENT              pFormElement  = NULL;
    ULONG                           ulHashIndex   = 0;

    pFormElement =
        (PHTTP_FORM_ELEMENT)pMyObject->GetFormElement
            (
                (ANSC_HANDLE)pMyObject,
                name
            );

    if ( !pFormElement )
    {
        return  ANSC_STATUS_CANT_FIND;
    }
    else
    {
        ulHashIndex = pFormElement->HashIndex;
    }

    AnscAcquireLock        (&pMyObject->FeoTableLock);
    AnscQueuePopEntryByLink(&pMyObject->FeoTable[ulHashIndex], &pFormElement->Linkage);
    AnscReleaseLock        (&pMyObject->FeoTableLock);

    return  ANSC_STATUS_SUCCESS;
}

開發者ID:davekimble，項目名稱:CcspCommonLibrary，代碼行數:35，代碼來源:http_fco_management.c

示例14: AnscHashString

ANSC_HANDLE
HttpFcoGetFormElement
    (
        ANSC_HANDLE                 hThisObject,
        char*                       name
    )
{
    ANSC_STATUS                     returnStatus  = ANSC_STATUS_SUCCESS;
    PHTTP_FORM_CONTENT_OBJECT       pMyObject     = (PHTTP_FORM_CONTENT_OBJECT)hThisObject;
    PHTTP_HFP_INTERFACE             pHfpIf        = (PHTTP_HFP_INTERFACE      )pMyObject->hHfpIf;
    PHTTP_FORM_ELEMENT              pFormElement  = NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry   = NULL;
    ULONG                           ulHashIndex   = AnscHashString(name, AnscSizeOfString(name), HTTP_FCO_FEO_TABLE_SIZE);

    AnscAcquireLock(&pMyObject->FeoTableLock);

    pSLinkEntry = AnscQueueGetFirstEntry(&pMyObject->FeoTable[ulHashIndex]);

    while ( pSLinkEntry )
    {
        pFormElement = ACCESS_HTTP_FORM_ELEMENT(pSLinkEntry);
        pSLinkEntry  = AnscQueueGetNextEntry(pSLinkEntry);

        if ( AnscEqualString(pFormElement->Name, name, TRUE) )
        {
            AnscReleaseLock(&pMyObject->FeoTableLock);

            return  (ANSC_HANDLE)pFormElement;
        }
    }

    AnscReleaseLock(&pMyObject->FeoTableLock);

    return  (ANSC_HANDLE)NULL;
}

開發者ID:davekimble，項目名稱:CcspCommonLibrary，代碼行數:35，代碼來源:http_fco_management.c

示例15: AnscAcquireLock

ANSC_HANDLE
HttpWcsoGetEndWcto
    (
        ANSC_HANDLE                 hThisObject
    )
{
    ANSC_STATUS                     returnStatus = ANSC_STATUS_SUCCESS;
    PHTTP_WEBC_SESSION_OBJECT       pMyObject    = (PHTTP_WEBC_SESSION_OBJECT)hThisObject;
    PHTTP_BSP_INTERFACE             pBspIf       = (PHTTP_BSP_INTERFACE      )pMyObject->hBspIf;
    PHTTP_HFP_INTERFACE             pHfpIf       = (PHTTP_HFP_INTERFACE      )pMyObject->hHfpIf;
    PHTTP_WEBC_TRANS_OBJECT         pWebcTrans   = NULL;
    PSINGLE_LINK_ENTRY              pSLinkEntry  = NULL;
    ULONG                           ulWctoState  = HTTP_WCTO_STATE_INITIALIZED;

    AnscAcquireLock(&pMyObject->WctoSListLock);

    pSLinkEntry = AnscSListGetFirstEntry(&pMyObject->WctoSList);

    if ( pSLinkEntry )
    {
        pWebcTrans = ACCESS_HTTP_WEBC_TRANS_OBJECT(pSLinkEntry);

        pWebcTrans->AcquireAccess((ANSC_HANDLE)pWebcTrans);
    }
    else
    {
        pWebcTrans = NULL;
    }

    AnscReleaseLock(&pMyObject->WctoSListLock);

    return  (ANSC_HANDLE)pWebcTrans;
}

開發者ID:rdkcmf，項目名稱:rdkb-CcspCommonLibrary，代碼行數:33，代碼來源:http_wcso_management.c

注：本文中的AnscAcquireLock函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。