Python config.floatX方法代碼示例

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def make_node(self, x, ilist):
        x_ = as_cuda_ndarray_variable(x)
        ilist_ = gpu_contiguous(T.cast(ilist, dtype=config.floatX)) # T.as_tensor_variable(ilist)
        #if ilist_.type.dtype[:3] not in ('int', 'uin'):
        #    raise TypeError('index must be integers')
        if ilist_.type.ndim != 1:
            raise TypeError('index must be vector')
        if x_.type.ndim == 0:
            raise TypeError('cannot index into a scalar')

        # # c code suppose it is int64
        # if x.ndim in [1, 2, 3] and ilist_.dtype in [
        #     'int8', 'int16', 'int32', 'uint8', 'uint16', 'uint32']:
        #     ilist_ = tensor.cast(ilist_, 'int64')

        bcast = (ilist_.broadcastable[0],) + x_.broadcastable[1:]
        return theano.gof.Apply(self, [x_, ilist_],
                                [CudaNdarrayType(dtype=x.dtype,
                                                 broadcastable=bcast)()]) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def grad(self, inputs, grads):
        g_output, = grads
        x, y, idx_list = inputs
        if x.dtype in theano.tensor.discrete_dtypes:
            # The output dtype is the same as x
            gx = x.zeros_like(dtype=theano.config.floatX)
            if y.dtype in theano.tensor.discrete_dtypes:
                gy = y.zeros_like(dtype=theano.config.floatX)
            else:
                gy = y.zeros_like()
        elif x.dtype in theano.tensor.complex_dtypes:
            raise NotImplementedError("No support for complex grad yet")
        else:
            if self.set_instead_of_inc:
                gx_op = AdvancedIncSubtensor1Floats(set_instead_of_inc=True,
                                                    inplace=self.inplace)
                gx = gx_op(g_output, y.zeros_like(), idx_list)
            else:
                gx = g_output
            gy = AdvancedSubtensor1Floats()(g_output, idx_list)
            gy = T.subtensor._sum_grad_over_bcasted_dims(y, gy)

        return [gx, gy] + [T.DisconnectedType()()] 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def __call__(self, algorithm):
        """
        Adjusts the learning rate according to the linear decay schedule

        Parameters
        ----------
        algorithm : WRITEME
        """
        if self._count == 0:
            self._base_lr = algorithm.learning_rate.get_value()
            self._step = ((self._base_lr - self._base_lr * self.decay_factor) /
                          (self.saturate - self.start + 1))
        self._count += 1
        if self._count >= self.start:
            if self._count < self.saturate:
                new_lr = self._base_lr - self._step * (self._count
                        - self.start + 1)
            else:
                new_lr = self._base_lr * self.decay_factor
        else:
            new_lr = self._base_lr
        assert new_lr > 0
        new_lr = np.cast[config.floatX](new_lr)
        algorithm.learning_rate.set_value(new_lr) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def on_monitor(self, model, dataset, algorithm):
        """
        Adjusts the learning rate according to the decay schedule.

        Parameters
        ----------
        model : a Model instance
        dataset : Dataset
        algorithm : WRITEME
        """

        if not self._initialized:
            self._init_lr = algorithm.learning_rate.get_value()
            if self._init_lr < self.min_lr:
                raise ValueError("The initial learning rate is smaller than " +
                                 "the minimum allowed learning rate.")
            self._initialized = True
        self._count += 1
        algorithm.learning_rate.set_value(np.cast[config.floatX](
            self.current_lr())) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def test_local_csm_properties_csm():
    data = tensor.vector()
    indices, indptr, shape = (tensor.ivector(), tensor.ivector(),
                              tensor.ivector())
    mode = theano.compile.mode.get_default_mode()
    mode = mode.including("specialize", "local_csm_properties_csm")
    for CS, cast in [(sparse.CSC, sp.csc_matrix),
                     (sparse.CSR, sp.csr_matrix)]:
        f = theano.function([data, indices, indptr, shape],
                            sparse.csm_properties(
                                CS(data, indices, indptr, shape)),
                            mode=mode)
        assert not any(
            isinstance(node.op, (sparse.CSM, sparse.CSMProperties))
            for node in f.maker.fgraph.toposort())
        v = cast(random_lil((10, 40),
                            config.floatX, 3))
        f(v.data, v.indices, v.indptr, v.shape) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def test_local_csm_grad_c():
    raise SkipTest("Opt disabled as it don't support unsorted indices")
    if not theano.config.cxx:
        raise SkipTest("G++ not available, so we need to skip this test.")
    data = tensor.vector()
    indices, indptr, shape = (tensor.ivector(), tensor.ivector(),
                              tensor.ivector())
    mode = theano.compile.mode.get_default_mode()

    if theano.config.mode == 'FAST_COMPILE':
        mode = theano.compile.Mode(linker='c|py', optimizer='fast_compile')

    mode = mode.including("specialize", "local_csm_grad_c")
    for CS, cast in [(sparse.CSC, sp.csc_matrix), (sparse.CSR, sp.csr_matrix)]:
        cost = tensor.sum(sparse.DenseFromSparse()(CS(data, indices, indptr, shape)))
        f = theano.function(
            [data, indices, indptr, shape],
            tensor.grad(cost, data),
            mode=mode)
        assert not any(isinstance(node.op, sparse.CSMGrad) for node
                       in f.maker.fgraph.toposort())
        v = cast(random_lil((10, 40),
                            config.floatX, 3))
        f(v.data, v.indices, v.indptr, v.shape) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def __generalized_ss_test(self, theanop, symbolicType, testOp, scipyType):

        scipy_ver = [int(n) for n in scipy.__version__.split('.')[:2]]

        if (bool(scipy_ver < [0, 13])):
            raise SkipTest("comparison operators need newer release of scipy")

        x = symbolicType()
        y = symbolicType()

        op = theanop(x, y)

        f = theano.function([x, y], op)

        m1 = scipyType(random_lil((10, 40), config.floatX, 3))
        m2 = scipyType(random_lil((10, 40), config.floatX, 3))

        self.assertTrue(numpy.array_equal(f(m1, m2).data, testOp(m1, m2).data)) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def __generalized_ds_test(self, theanop, symbolicType, testOp, scipyType):

        scipy_ver = [int(n) for n in scipy.__version__.split('.')[:2]]

        if (bool(scipy_ver < [0, 13])):
            raise SkipTest("comparison operators need newer release of scipy")

        x = symbolicType()
        y = theano.tensor.matrix()

        op = theanop(y, x)

        f = theano.function([y, x], op)

        m1 = scipyType(random_lil((10, 40), config.floatX, 3))
        m2 = self._rand_ranged(1000, -1000, [10, 40])

        self.assertTrue(numpy.array_equal(f(m2, m1).data, testOp(m2, m1).data)) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def test_equality_case(self):
        """
        Test assuring normal behaviour when values
        in the matrices are equal
        """

        scipy_ver = [int(n) for n in scipy.__version__.split('.')[:2]]

        if (bool(scipy_ver < [0, 13])):
            raise SkipTest("comparison operators need newer release of scipy")

        x = sparse.csc_matrix()
        y = theano.tensor.matrix()

        m1 = sp.csc_matrix((2, 2), dtype=theano.config.floatX)
        m2 = numpy.asarray([[0, 0], [0, 0]], dtype=theano.config.floatX)

        for func in self.testsDic:

            op = func(y, x)
            f = theano.function([y, x], op)

            self.assertTrue(numpy.array_equal(f(m2, m1),
                                              self.testsDic[func](m2, m1))) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def setUp(self):
        super(DotTests, self).setUp()
        x_size = (10, 100)
        y_size = (100, 1000)
        utt.seed_rng()

        self.x_csr = scipy.sparse.csr_matrix(
            numpy.random.binomial(1, 0.5, x_size), dtype=theano.config.floatX)
        self.x_csc = scipy.sparse.csc_matrix(
            numpy.random.binomial(1, 0.5, x_size), dtype=theano.config.floatX)
        self.y = numpy.asarray(numpy.random.uniform(-1, 1, y_size),
                               dtype=theano.config.floatX)
        self.y_csr = scipy.sparse.csr_matrix(
            numpy.random.binomial(1, 0.5, y_size), dtype=theano.config.floatX)
        self.y_csc = scipy.sparse.csc_matrix(
            numpy.random.binomial(1, 0.5, y_size), dtype=theano.config.floatX)
        self.v_10 = numpy.asarray(numpy.random.uniform(-1, 1, 10),
                                  dtype=theano.config.floatX)
        self.v_100 = numpy.asarray(numpy.random.uniform(-1, 1, 100),
                                   dtype=theano.config.floatX) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def test_size():
    """
    Ensure the `size` attribute of sparse matrices behaves as in numpy.
    """
    for sparse_type in ('csc_matrix', 'csr_matrix'):
        x = getattr(theano.sparse, sparse_type)()
        y = getattr(scipy.sparse, sparse_type)((5, 7)).astype(config.floatX)
        get_size = theano.function([x], x.size)

        def check():
            assert y.size == get_size(y)
        # We verify that the size is correctly updated as we store more data
        # into the sparse matrix (including zeros).
        check()
        y[0, 0] = 1
        check()
        y[0, 1] = 0
        check() 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def grad(self, inputs, outputs_gradients):
        gz = outputs_gradients[0]

        if gz.dtype in complex_dtypes:
            raise NotImplementedError("grad not implemented for complex types")
        if inputs[0].dtype in complex_dtypes:
            raise NotImplementedError("grad not implemented for complex types")

        if gz.dtype in discrete_dtypes:
            if inputs[0].dtype in discrete_dtypes:
                return [inputs[0].zeros_like(dtype=theano.config.floatX)]
            else:
                return [inputs[0].zeros_like()]
        else:
            if inputs[0].dtype in discrete_dtypes:
                return [gz]
            else:
                return [Cast(inputs[0].dtype)(gz)] 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def test_broadcast(self):
        # test that we don't raise an error during optimization for no good
        # reason as softmax_with_bias don't support correctly some/all
        # broadcasted inputs pattern
        initial_W = numpy.asarray([[0.1, 0.1, 0.1],
                                   [0.1, 0.1, 0.1],
                                   [0.1, 0.1, 0.1]],
                                  dtype=theano.config.floatX)
        W = theano.shared(value=initial_W, name='W')
        vbias = theano.shared(value=0.1, name='vbias')  # 0.01
        hid = T.vector('hid')
        f = theano.function([hid],
                            T.nnet.softmax_op(T.dot(hid, W.T) + vbias))
        ops = [node.op for node in f.maker.fgraph.toposort()]
        assert softmax_with_bias not in ops
        assert softmax_op in ops

        f([0, 1, 0])
        # print f.maker.fgraph.toposort() 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def test_local_softmax_grad_optimization_and_big_input(self):
        """Test the Logsoftmax's grad substitution.

        Check that Log(Softmax(x))'s grad is substituted with Logsoftmax(x)'s
        grad and that the new operation does not explode for big inputs.
        Note that only the grad is checked.
        """
        m = theano.config.mode
        m = theano.compile.get_mode(m)
        m.check_isfinite = False
        # some inputs that are large to make the gradient explode in the non
        # optimized case
        a = numpy.exp(10 * numpy.random.rand(5, 10).astype(theano.config.floatX))

        def myfunc(x):
            sm = tensor.nnet.softmax(x)
            logsm = tensor.log(sm)
            return logsm
        # We set step to 0.1 because for big values we need a big epsilon
        utt.verify_grad(myfunc, [a], eps=0.1, mode=m)
        f = theano.function([], myfunc(a))
        self.assertTrue(hasattr(f.maker.fgraph.outputs[0].tag, 'trace')) 

# 需要導入模塊: from theano import config [as 別名]
# 或者: from theano.config import floatX [as 別名]
def test_basic(self):
        c = T.matrix()
        p_y = T.exp(c) / T.exp(c).sum(axis=1).dimshuffle(0, 'x')

        # test that function contains softmax and no div.
        f = theano.function([c], p_y, mode=self.mode)

        assert hasattr(f.maker.fgraph.outputs[0].tag, 'trace')

        f_ops = [n.op for n in f.maker.fgraph.toposort()]
        # print '--- f ='
        # printing.debugprint(f)
        # print '==='
        assert len(f_ops) == 1
        assert softmax_op in f_ops
        f(self.rng.rand(3, 4).astype(config.floatX))