Golang compute.NewUsageOperationsClient函數代碼示例

本文整理匯總了Golang中github.com/Azure/azure-sdk-for-go/arm/compute.NewUsageOperationsClient函數的典型用法代碼示例。如果您正苦於以下問題：Golang NewUsageOperationsClient函數的具體用法？Golang NewUsageOperationsClient怎麽用？Golang NewUsageOperationsClient使用的例子？那麽, 這裏精選的函數代碼示例或許可以為您提供幫助。

在下文中一共展示了NewUsageOperationsClient函數的3個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: getArmClient

// getArmClient is a helper method which returns a fully instantiated
// *ArmClient based on the Config's current settings.
func (c *Config) getArmClient() (*ArmClient, error) {
	// client declarations:
	client := ArmClient{}

	rivieraClient, err := riviera.NewClient(&riviera.AzureResourceManagerCredentials{
		ClientID:       c.ClientID,
		ClientSecret:   c.ClientSecret,
		TenantID:       c.TenantID,
		SubscriptionID: c.SubscriptionID,
	})
	if err != nil {
		return nil, fmt.Errorf("Error creating Riviera client: %s", err)
	}

	// validate that the credentials are correct using Riviera. Note that this must be
	// done _before_ using the Microsoft SDK, because Riviera handles errors. Using a
	// namespace registration instead of a simple OAuth token refresh guarantees that
	// service delegation is correct. This has the effect of registering Microsoft.Compute
	// which is neccessary anyway.
	if err := registerProviderWithSubscription("Microsoft.Compute", rivieraClient); err != nil {
		return nil, err
	}
	client.rivieraClient = rivieraClient

	oauthConfig, err := azure.PublicCloud.OAuthConfigForTenant(c.TenantID)
	if err != nil {
		return nil, err
	}

	// This is necessary because no-one thought about API usability. OAuthConfigForTenant
	// returns a pointer, which can be nil. NewServicePrincipalToken does not take a pointer.
	// Consequently we have to nil check this and do _something_ if it is nil, which should
	// be either an invariant of OAuthConfigForTenant (guarantee the token is not nil if
	// there is no error), or NewServicePrincipalToken should error out if the configuration
	// is required and is nil. This is the worst of all worlds, however.
	if oauthConfig == nil {
		return nil, fmt.Errorf("Unable to configure OAuthConfig for tenant %s", c.TenantID)
	}

	spt, err := azure.NewServicePrincipalToken(*oauthConfig, c.ClientID, c.ClientSecret,
		azure.PublicCloud.ResourceManagerEndpoint)
	if err != nil {
		return nil, err
	}

	// NOTE: these declarations should be left separate for clarity should the
	// clients be wished to be configured with custom Responders/PollingModess etc...
	asc := compute.NewAvailabilitySetsClient(c.SubscriptionID)
	setUserAgent(&asc.Client)
	asc.Authorizer = spt
	asc.Sender = autorest.CreateSender(withRequestLogging())
	client.availSetClient = asc

	uoc := compute.NewUsageOperationsClient(c.SubscriptionID)
	setUserAgent(&uoc.Client)
	uoc.Authorizer = spt
	uoc.Sender = autorest.CreateSender(withRequestLogging())
	client.usageOpsClient = uoc

	vmeic := compute.NewVirtualMachineExtensionImagesClient(c.SubscriptionID)
	setUserAgent(&vmeic.Client)
	vmeic.Authorizer = spt
	vmeic.Sender = autorest.CreateSender(withRequestLogging())
	client.vmExtensionImageClient = vmeic

	vmec := compute.NewVirtualMachineExtensionsClient(c.SubscriptionID)
	setUserAgent(&vmec.Client)
	vmec.Authorizer = spt
	vmec.Sender = autorest.CreateSender(withRequestLogging())
	client.vmExtensionClient = vmec

	vmic := compute.NewVirtualMachineImagesClient(c.SubscriptionID)
	setUserAgent(&vmic.Client)
	vmic.Authorizer = spt
	vmic.Sender = autorest.CreateSender(withRequestLogging())
	client.vmImageClient = vmic

	vmssc := compute.NewVirtualMachineScaleSetsClient(c.SubscriptionID)
	setUserAgent(&vmssc.Client)
	vmssc.Authorizer = spt
	vmssc.Sender = autorest.CreateSender(withRequestLogging())
	client.vmScaleSetClient = vmssc

	vmc := compute.NewVirtualMachinesClient(c.SubscriptionID)
	setUserAgent(&vmc.Client)
	vmc.Authorizer = spt
	vmc.Sender = autorest.CreateSender(withRequestLogging())
	client.vmClient = vmc

	agc := network.NewApplicationGatewaysClient(c.SubscriptionID)
	setUserAgent(&agc.Client)
	agc.Authorizer = spt
	agc.Sender = autorest.CreateSender(withRequestLogging())
	client.appGatewayClient = agc

	ifc := network.NewInterfacesClient(c.SubscriptionID)
	setUserAgent(&ifc.Client)
	ifc.Authorizer = spt
//.........這裏部分代碼省略.........

開發者ID:ewdurbin，項目名稱:terraform，代碼行數:101，代碼來源:config.go

示例2: getArmClient

// getArmClient is a helper method which returns a fully instantiated
// *ArmClient based on the Config's current settings.
func (c *Config) getArmClient() (*ArmClient, error) {
	spt, err := azure.NewServicePrincipalToken(c.ClientID, c.ClientSecret, c.TenantID, azure.AzureResourceManagerScope)
	if err != nil {
		return nil, err
	}

	// client declarations:
	client := ArmClient{}

	// NOTE: these declarations should be left separate for clarity should the
	// clients be wished to be configured with custom Responders/PollingModess etc...
	asc := compute.NewAvailabilitySetsClient(c.SubscriptionID)
	setUserAgent(&asc.Client)
	asc.Authorizer = spt
	asc.Sender = autorest.CreateSender(withRequestLogging())
	client.availSetClient = asc

	uoc := compute.NewUsageOperationsClient(c.SubscriptionID)
	setUserAgent(&uoc.Client)
	uoc.Authorizer = spt
	uoc.Sender = autorest.CreateSender(withRequestLogging())
	client.usageOpsClient = uoc

	vmeic := compute.NewVirtualMachineExtensionImagesClient(c.SubscriptionID)
	setUserAgent(&vmeic.Client)
	vmeic.Authorizer = spt
	vmeic.Sender = autorest.CreateSender(withRequestLogging())
	client.vmExtensionImageClient = vmeic

	vmec := compute.NewVirtualMachineExtensionsClient(c.SubscriptionID)
	setUserAgent(&vmec.Client)
	vmec.Authorizer = spt
	vmec.Sender = autorest.CreateSender(withRequestLogging())
	client.vmExtensionClient = vmec

	vmic := compute.NewVirtualMachineImagesClient(c.SubscriptionID)
	setUserAgent(&vmic.Client)
	vmic.Authorizer = spt
	vmic.Sender = autorest.CreateSender(withRequestLogging())
	client.vmImageClient = vmic

	vmc := compute.NewVirtualMachinesClient(c.SubscriptionID)
	setUserAgent(&vmc.Client)
	vmc.Authorizer = spt
	vmc.Sender = autorest.CreateSender(withRequestLogging())
	client.vmClient = vmc

	agc := network.NewApplicationGatewaysClient(c.SubscriptionID)
	setUserAgent(&agc.Client)
	agc.Authorizer = spt
	agc.Sender = autorest.CreateSender(withRequestLogging())
	client.appGatewayClient = agc

	ifc := network.NewInterfacesClient(c.SubscriptionID)
	setUserAgent(&ifc.Client)
	ifc.Authorizer = spt
	ifc.Sender = autorest.CreateSender(withRequestLogging())
	client.ifaceClient = ifc

	lbc := network.NewLoadBalancersClient(c.SubscriptionID)
	setUserAgent(&lbc.Client)
	lbc.Authorizer = spt
	lbc.Sender = autorest.CreateSender(withRequestLogging())
	client.loadBalancerClient = lbc

	lgc := network.NewLocalNetworkGatewaysClient(c.SubscriptionID)
	setUserAgent(&lgc.Client)
	lgc.Authorizer = spt
	lgc.Sender = autorest.CreateSender(withRequestLogging())
	client.localNetConnClient = lgc

	pipc := network.NewPublicIPAddressesClient(c.SubscriptionID)
	setUserAgent(&pipc.Client)
	pipc.Authorizer = spt
	pipc.Sender = autorest.CreateSender(withRequestLogging())
	client.publicIPClient = pipc

	sgc := network.NewSecurityGroupsClient(c.SubscriptionID)
	setUserAgent(&sgc.Client)
	sgc.Authorizer = spt
	sgc.Sender = autorest.CreateSender(withRequestLogging())
	client.secGroupClient = sgc

	src := network.NewSecurityRulesClient(c.SubscriptionID)
	setUserAgent(&src.Client)
	src.Authorizer = spt
	src.Sender = autorest.CreateSender(withRequestLogging())
	client.secRuleClient = src

	snc := network.NewSubnetsClient(c.SubscriptionID)
	setUserAgent(&snc.Client)
	snc.Authorizer = spt
	snc.Sender = autorest.CreateSender(withRequestLogging())
	client.subnetClient = snc

	vgcc := network.NewVirtualNetworkGatewayConnectionsClient(c.SubscriptionID)
	setUserAgent(&vgcc.Client)
	vgcc.Authorizer = spt
//.........這裏部分代碼省略.........

開發者ID:astropuffin，項目名稱:terraform，代碼行數:101，代碼來源:config.go

示例3: getArmClient

// getArmClient is a helper method which returns a fully instantiated
// *ArmClient based on the Config's current settings.
func (c *Config) getArmClient() (*ArmClient, error) {
	// client declarations:
	client := ArmClient{
		clientId:       c.ClientID,
		tenantId:       c.TenantID,
		subscriptionId: c.SubscriptionID,
	}

	rivieraClient, err := riviera.NewClient(&riviera.AzureResourceManagerCredentials{
		ClientID:       c.ClientID,
		ClientSecret:   c.ClientSecret,
		TenantID:       c.TenantID,
		SubscriptionID: c.SubscriptionID,
	})
	if err != nil {
		return nil, fmt.Errorf("Error creating Riviera client: %s", err)
	}

	// validate that the credentials are correct using Riviera. Note that this must be
	// done _before_ using the Microsoft SDK, because Riviera handles errors. Using a
	// namespace registration instead of a simple OAuth token refresh guarantees that
	// service delegation is correct. This has the effect of registering Microsoft.Compute
	// which is neccessary anyway.
	if err := registerProviderWithSubscription("Microsoft.Compute", rivieraClient); err != nil {
		return nil, err
	}
	client.rivieraClient = rivieraClient

	oauthConfig, err := azure.PublicCloud.OAuthConfigForTenant(c.TenantID)
	if err != nil {
		return nil, err
	}

	// OAuthConfigForTenant returns a pointer, which can be nil.
	if oauthConfig == nil {
		return nil, fmt.Errorf("Unable to configure OAuthConfig for tenant %s", c.TenantID)
	}

	spt, err := azure.NewServicePrincipalToken(*oauthConfig, c.ClientID, c.ClientSecret,
		azure.PublicCloud.ResourceManagerEndpoint)
	if err != nil {
		return nil, err
	}

	// NOTE: these declarations should be left separate for clarity should the
	// clients be wished to be configured with custom Responders/PollingModess etc...
	asc := compute.NewAvailabilitySetsClient(c.SubscriptionID)
	setUserAgent(&asc.Client)
	asc.Authorizer = spt
	asc.Sender = autorest.CreateSender(withRequestLogging())
	client.availSetClient = asc

	uoc := compute.NewUsageOperationsClient(c.SubscriptionID)
	setUserAgent(&uoc.Client)
	uoc.Authorizer = spt
	uoc.Sender = autorest.CreateSender(withRequestLogging())
	client.usageOpsClient = uoc

	vmeic := compute.NewVirtualMachineExtensionImagesClient(c.SubscriptionID)
	setUserAgent(&vmeic.Client)
	vmeic.Authorizer = spt
	vmeic.Sender = autorest.CreateSender(withRequestLogging())
	client.vmExtensionImageClient = vmeic

	vmec := compute.NewVirtualMachineExtensionsClient(c.SubscriptionID)
	setUserAgent(&vmec.Client)
	vmec.Authorizer = spt
	vmec.Sender = autorest.CreateSender(withRequestLogging())
	client.vmExtensionClient = vmec

	vmic := compute.NewVirtualMachineImagesClient(c.SubscriptionID)
	setUserAgent(&vmic.Client)
	vmic.Authorizer = spt
	vmic.Sender = autorest.CreateSender(withRequestLogging())
	client.vmImageClient = vmic

	vmssc := compute.NewVirtualMachineScaleSetsClient(c.SubscriptionID)
	setUserAgent(&vmssc.Client)
	vmssc.Authorizer = spt
	vmssc.Sender = autorest.CreateSender(withRequestLogging())
	client.vmScaleSetClient = vmssc

	vmc := compute.NewVirtualMachinesClient(c.SubscriptionID)
	setUserAgent(&vmc.Client)
	vmc.Authorizer = spt
	vmc.Sender = autorest.CreateSender(withRequestLogging())
	client.vmClient = vmc

	agc := network.NewApplicationGatewaysClient(c.SubscriptionID)
	setUserAgent(&agc.Client)
	agc.Authorizer = spt
	agc.Sender = autorest.CreateSender(withRequestLogging())
	client.appGatewayClient = agc

	ehnc := eventhub.NewNamespacesClient(c.SubscriptionID)
	setUserAgent(&ehnc.Client)
	ehnc.Authorizer = spt
	ehnc.Sender = autorest.CreateSender(withRequestLogging())
//.........這裏部分代碼省略.........

開發者ID:spotinst，項目名稱:terraform，代碼行數:101，代碼來源:config.go

注：本文中的github.com/Azure/azure-sdk-for-go/arm/compute.NewUsageOperationsClient函數示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。