Golang ld.Reloc類代碼示例

本文整理匯總了Golang中cmd/link/internal/ld.Reloc類的典型用法代碼示例。如果您正苦於以下問題：Golang Reloc類的具體用法？Golang Reloc怎麽用？Golang Reloc使用的例子？那麽, 這裏精選的類代碼示例或許可以為您提供幫助。

在下文中一共展示了Reloc類的15個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: trampoline

// Convert the direct jump relocation r to refer to a trampoline if the target is too far
func trampoline(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol) {
	switch r.Type {
	case obj.R_CALLARM:
		// r.Add is the instruction
		// low 24-bit encodes the target address
		t := (ld.Symaddr(r.Sym) + int64(signext24(r.Add&0xffffff)*4) - (s.Value + int64(r.Off))) / 4
		if t > 0x7fffff || t < -0x800000 || (*ld.FlagDebugTramp > 1 && s.File != r.Sym.File) {
			// direct call too far, need to insert trampoline.
			// look up existing trampolines first. if we found one within the range
			// of direct call, we can reuse it. otherwise create a new one.
			offset := (signext24(r.Add&0xffffff) + 2) * 4
			var tramp *ld.Symbol
			for i := 0; ; i++ {
				name := r.Sym.Name + fmt.Sprintf("%+d-tramp%d", offset, i)
				tramp = ctxt.Syms.Lookup(name, int(r.Sym.Version))
				if tramp.Type == obj.SDYNIMPORT {
					// don't reuse trampoline defined in other module
					continue
				}
				if tramp.Value == 0 {
					// either the trampoline does not exist -- we need to create one,
					// or found one the address which is not assigned -- this will be
					// laid down immediately after the current function. use this one.
					break
				}

				t = (ld.Symaddr(tramp) - 8 - (s.Value + int64(r.Off))) / 4
				if t >= -0x800000 && t < 0x7fffff {
					// found an existing trampoline that is not too far
					// we can just use it
					break
				}
			}
			if tramp.Type == 0 {
				// trampoline does not exist, create one
				ctxt.AddTramp(tramp)
				if ctxt.DynlinkingGo() {
					if immrot(uint32(offset)) == 0 {
						ld.Errorf(s, "odd offset in dynlink direct call: %v+%d", r.Sym, offset)
					}
					gentrampdyn(tramp, r.Sym, int64(offset))
				} else if ld.Buildmode == ld.BuildmodeCArchive || ld.Buildmode == ld.BuildmodeCShared || ld.Buildmode == ld.BuildmodePIE {
					gentramppic(tramp, r.Sym, int64(offset))
				} else {
					gentramp(tramp, r.Sym, int64(offset))
				}
			}
			// modify reloc to point to tramp, which will be resolved later
			r.Sym = tramp
			r.Add = r.Add&0xff000000 | 0xfffffe // clear the offset embedded in the instruction
			r.Done = 0
		}
	default:
		ld.Errorf(s, "trampoline called with non-jump reloc: %v", r.Type)
	}
}

開發者ID:achanda，項目名稱:go，代碼行數:57，代碼來源:asm.go

示例2: trampoline

// Convert the direct jump relocation r to refer to a trampoline if the target is too far
func trampoline(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol) {
	switch r.Type {
	case obj.R_CALLARM:
		// r.Add is the instruction
		// low 24-bit encodes the target address
		t := (ld.Symaddr(r.Sym) + int64(signext24(r.Add&0xffffff)*4) - (s.Value + int64(r.Off))) / 4
		if t > 0x7fffff || t < -0x800000 || (*ld.FlagDebugTramp > 1 && s.File != r.Sym.File) {
			// direct call too far, need to insert trampoline
			offset := (signext24(r.Add&0xffffff) + 2) * 4
			var tramp *ld.Symbol
			for i := 0; ; i++ {
				name := r.Sym.Name + fmt.Sprintf("%+d-tramp%d", offset, i)
				tramp = ctxt.Syms.Lookup(name, int(r.Sym.Version))
				if tramp.Value == 0 {
					// either the trampoline does not exist -- we need to create one,
					// or found one the address which is not assigned -- this will be
					// laid down immediately after the current function. use this one.
					break
				}

				t = (ld.Symaddr(tramp) - 8 - (s.Value + int64(r.Off))) / 4
				if t >= -0x800000 && t < 0x7fffff {
					// found an existing trampoline that is not too far
					// we can just use it
					break
				}
			}
			if tramp.Type == 0 {
				// trampoline does not exist, create one
				ctxt.AddTramp(tramp)
				tramp.Size = 12 // 3 instructions
				tramp.P = make([]byte, tramp.Size)
				t = ld.Symaddr(r.Sym) + int64(offset)
				o1 := uint32(0xe5900000 | 11<<12 | 15<<16) // MOVW (R15), R11 // R15 is actual pc + 8
				o2 := uint32(0xe12fff10 | 11)              // JMP  (R11)
				o3 := uint32(t)                            // WORD $target
				ld.SysArch.ByteOrder.PutUint32(tramp.P, o1)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[4:], o2)
				ld.SysArch.ByteOrder.PutUint32(tramp.P[8:], o3)
			}
			// modify reloc to point to tramp, which will be resolved later
			r.Sym = tramp
			r.Add = r.Add&0xff000000 | 0xfffffe // clear the offset embedded in the instruction
			r.Done = 0
		}
	default:
		ld.Errorf(s, "trampoline called with non-jump reloc: %v", r.Type)
	}
}

開發者ID:kuangchanglang，項目名稱:go，代碼行數:50，代碼來源:asm.go

示例3: elfreloc1

func elfreloc1(r *ld.Reloc, sectoff int64) int {
	ld.Thearch.Vput(uint64(sectoff))

	elfsym := r.Xsym.ElfsymForReloc()
	switch r.Type {
	default:
		return -1

	case obj.R_ADDR:
		switch r.Siz {
		case 4:
			ld.Thearch.Vput(ld.R_PPC64_ADDR32 | uint64(elfsym)<<32)
		case 8:
			ld.Thearch.Vput(ld.R_PPC64_ADDR64 | uint64(elfsym)<<32)
		default:
			return -1
		}

	case obj.R_POWER_TLS:
		ld.Thearch.Vput(ld.R_PPC64_TLS | uint64(elfsym)<<32)

	case obj.R_POWER_TLS_LE:
		ld.Thearch.Vput(ld.R_PPC64_TPREL16 | uint64(elfsym)<<32)

	case obj.R_POWER_TLS_IE:
		ld.Thearch.Vput(ld.R_PPC64_GOT_TPREL16_HA | uint64(elfsym)<<32)
		ld.Thearch.Vput(uint64(r.Xadd))
		ld.Thearch.Vput(uint64(sectoff + 4))
		ld.Thearch.Vput(ld.R_PPC64_GOT_TPREL16_LO_DS | uint64(elfsym)<<32)

	case obj.R_ADDRPOWER:
		ld.Thearch.Vput(ld.R_PPC64_ADDR16_HA | uint64(elfsym)<<32)
		ld.Thearch.Vput(uint64(r.Xadd))
		ld.Thearch.Vput(uint64(sectoff + 4))
		ld.Thearch.Vput(ld.R_PPC64_ADDR16_LO | uint64(elfsym)<<32)

	case obj.R_ADDRPOWER_DS:
		ld.Thearch.Vput(ld.R_PPC64_ADDR16_HA | uint64(elfsym)<<32)
		ld.Thearch.Vput(uint64(r.Xadd))
		ld.Thearch.Vput(uint64(sectoff + 4))
		ld.Thearch.Vput(ld.R_PPC64_ADDR16_LO_DS | uint64(elfsym)<<32)

	case obj.R_ADDRPOWER_GOT:
		ld.Thearch.Vput(ld.R_PPC64_GOT16_HA | uint64(elfsym)<<32)
		ld.Thearch.Vput(uint64(r.Xadd))
		ld.Thearch.Vput(uint64(sectoff + 4))
		ld.Thearch.Vput(ld.R_PPC64_GOT16_LO_DS | uint64(elfsym)<<32)

	case obj.R_ADDRPOWER_PCREL:
		ld.Thearch.Vput(ld.R_PPC64_REL16_HA | uint64(elfsym)<<32)
		ld.Thearch.Vput(uint64(r.Xadd))
		ld.Thearch.Vput(uint64(sectoff + 4))
		ld.Thearch.Vput(ld.R_PPC64_REL16_LO | uint64(elfsym)<<32)
		r.Xadd += 4

	case obj.R_ADDRPOWER_TOCREL:
		ld.Thearch.Vput(ld.R_PPC64_TOC16_HA | uint64(elfsym)<<32)
		ld.Thearch.Vput(uint64(r.Xadd))
		ld.Thearch.Vput(uint64(sectoff + 4))
		ld.Thearch.Vput(ld.R_PPC64_TOC16_LO | uint64(elfsym)<<32)

	case obj.R_ADDRPOWER_TOCREL_DS:
		ld.Thearch.Vput(ld.R_PPC64_TOC16_HA | uint64(elfsym)<<32)
		ld.Thearch.Vput(uint64(r.Xadd))
		ld.Thearch.Vput(uint64(sectoff + 4))
		ld.Thearch.Vput(ld.R_PPC64_TOC16_LO_DS | uint64(elfsym)<<32)

	case obj.R_CALLPOWER:
		if r.Siz != 4 {
			return -1
		}
		ld.Thearch.Vput(ld.R_PPC64_REL24 | uint64(elfsym)<<32)

	}
	ld.Thearch.Vput(uint64(r.Xadd))

	return 0
}

開發者ID:Mokolea，項目名稱:go，代碼行數:78，代碼來源:asm.go

示例4: adddynrel

func adddynrel(s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ld.Ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ld.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_PPC64_REL24:
		r.Type = obj.R_CALLPOWER

		// This is a local call, so the caller isn't setting
		// up r12 and r2 is the same for the caller and
		// callee. Hence, we need to go to the local entry
		// point.  (If we don't do this, the callee will try
		// to use r12 to compute r2.)
		r.Add += int64(r.Sym.Localentry) * 4

		if targ.Type == obj.SDYNIMPORT {
			// Should have been handled in elfsetupplt
			ld.Diag("unexpected R_PPC64_REL24 for dyn import")
		}

		return

	case 256 + ld.R_PPC_REL32:
		r.Type = obj.R_PCREL
		r.Add += 4

		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected R_PPC_REL32 for dyn import")
		}

		return

	case 256 + ld.R_PPC64_ADDR64:
		r.Type = obj.R_ADDR
		if targ.Type == obj.SDYNIMPORT {
			// These happen in .toc sections
			ld.Adddynsym(ld.Ctxt, targ)

			rela := ld.Linklookup(ld.Ctxt, ".rela", 0)
			ld.Addaddrplus(ld.Ctxt, rela, s, int64(r.Off))
			ld.Adduint64(ld.Ctxt, rela, ld.ELF64_R_INFO(uint32(targ.Dynid), ld.R_PPC64_ADDR64))
			ld.Adduint64(ld.Ctxt, rela, uint64(r.Add))
			r.Type = 256 // ignore during relocsym
		}

		return

	case 256 + ld.R_PPC64_TOC16:
		r.Type = obj.R_POWER_TOC
		r.Variant = ld.RV_POWER_LO | ld.RV_CHECK_OVERFLOW
		return

	case 256 + ld.R_PPC64_TOC16_LO:
		r.Type = obj.R_POWER_TOC
		r.Variant = ld.RV_POWER_LO
		return

	case 256 + ld.R_PPC64_TOC16_HA:
		r.Type = obj.R_POWER_TOC
		r.Variant = ld.RV_POWER_HA | ld.RV_CHECK_OVERFLOW
		return

	case 256 + ld.R_PPC64_TOC16_HI:
		r.Type = obj.R_POWER_TOC
		r.Variant = ld.RV_POWER_HI | ld.RV_CHECK_OVERFLOW
		return

	case 256 + ld.R_PPC64_TOC16_DS:
		r.Type = obj.R_POWER_TOC
		r.Variant = ld.RV_POWER_DS | ld.RV_CHECK_OVERFLOW
		return

	case 256 + ld.R_PPC64_TOC16_LO_DS:
		r.Type = obj.R_POWER_TOC
		r.Variant = ld.RV_POWER_DS
		return

	case 256 + ld.R_PPC64_REL16_LO:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_POWER_LO
		r.Add += 2 // Compensate for relocation size of 2
		return

	case 256 + ld.R_PPC64_REL16_HI:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_POWER_HI | ld.RV_CHECK_OVERFLOW
		r.Add += 2
		return

	case 256 + ld.R_PPC64_REL16_HA:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_POWER_HA | ld.RV_CHECK_OVERFLOW
		r.Add += 2
//.........這裏部分代碼省略.........

開發者ID:Mokolea，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例5: archreloc

func archreloc(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		default:
			return -1

		case obj.R_ADDRMIPS,
			obj.R_ADDRMIPSU:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym
			r.Xadd = r.Add
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(ctxt, rs) - ld.Symaddr(ctxt, rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
				ctxt.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			return 0

		case obj.R_ADDRMIPSTLS,
			obj.R_CALLMIPS,
			obj.R_JMPMIPS:
			r.Done = 0
			r.Xsym = r.Sym
			r.Xadd = r.Add
			return 0
		}
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(ctxt, r.Sym) + r.Add - ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".got", 0))
		return 0

	case obj.R_ADDRMIPS,
		obj.R_ADDRMIPSU:
		t := ld.Symaddr(ctxt, r.Sym) + r.Add
		o1 := ld.SysArch.ByteOrder.Uint32(s.P[r.Off:])
		if r.Type == obj.R_ADDRMIPS {
			*val = int64(o1&0xffff0000 | uint32(t)&0xffff)
		} else {
			*val = int64(o1&0xffff0000 | uint32((t+1<<15)>>16)&0xffff)
		}
		return 0

	case obj.R_ADDRMIPSTLS:
		// thread pointer is at 0x7000 offset from the start of TLS data area
		t := ld.Symaddr(ctxt, r.Sym) + r.Add - 0x7000
		if t < -32768 || t >= 32678 {
			ctxt.Diag("TLS offset out of range %d", t)
		}
		o1 := ld.SysArch.ByteOrder.Uint32(s.P[r.Off:])
		*val = int64(o1&0xffff0000 | uint32(t)&0xffff)
		return 0

	case obj.R_CALLMIPS,
		obj.R_JMPMIPS:
		// Low 26 bits = (S + A) >> 2
		t := ld.Symaddr(ctxt, r.Sym) + r.Add
		o1 := ld.SysArch.ByteOrder.Uint32(s.P[r.Off:])
		*val = int64(o1&0xfc000000 | uint32(t>>2)&^0xfc000000)
		return 0
	}

	return -1
}

開發者ID:hurkgu，項目名稱:go，代碼行數:76，代碼來源:asm.go

示例6: archreloc

func archreloc(ctxt *ld.Link, r *ld.Reloc, s *ld.Symbol, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		case obj.R_CALLARM:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym

			r.Xadd = r.Add
			if r.Xadd&0x800000 != 0 {
				r.Xadd |= ^0xffffff
			}
			r.Xadd *= 4
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(ctxt, rs) - ld.Symaddr(ctxt, rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
				ctxt.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			// ld64 for arm seems to want the symbol table to contain offset
			// into the section rather than pseudo virtual address that contains
			// the section load address.
			// we need to compensate that by removing the instruction's address
			// from addend.
			if ld.HEADTYPE == obj.Hdarwin {
				r.Xadd -= ld.Symaddr(ctxt, s) + int64(r.Off)
			}

			*val = int64(braddoff(int32(0xff000000&uint32(r.Add)), int32(0xffffff&uint32(r.Xadd/4))))
			return 0
		}

		return -1
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(ctxt, r.Sym) + r.Add - ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".got", 0))
		return 0

		// The following three arch specific relocations are only for generation of
	// Linux/ARM ELF's PLT entry (3 assembler instruction)
	case obj.R_PLT0: // add ip, pc, #0xXX00000
		if ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".got.plt", 0)) < ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0)) {
			ctxt.Diag(".got.plt should be placed after .plt section.")
		}
		*val = 0xe28fc600 + (0xff & (int64(uint32(ld.Symaddr(ctxt, r.Sym)-(ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0))+int64(r.Off))+r.Add)) >> 20))
		return 0

	case obj.R_PLT1: // add ip, ip, #0xYY000
		*val = 0xe28cca00 + (0xff & (int64(uint32(ld.Symaddr(ctxt, r.Sym)-(ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0))+int64(r.Off))+r.Add+4)) >> 12))

		return 0

	case obj.R_PLT2: // ldr pc, [ip, #0xZZZ]!
		*val = 0xe5bcf000 + (0xfff & int64(uint32(ld.Symaddr(ctxt, r.Sym)-(ld.Symaddr(ctxt, ld.Linklookup(ctxt, ".plt", 0))+int64(r.Off))+r.Add+8)))

		return 0

	case obj.R_CALLARM: // bl XXXXXX or b YYYYYY
		*val = int64(braddoff(int32(0xff000000&uint32(r.Add)), int32(0xffffff&uint32((ld.Symaddr(ctxt, r.Sym)+int64((uint32(r.Add))*4)-(s.Value+int64(r.Off)))/4))))

		return 0
	}

	return -1
}

開發者ID:SpiderOak，項目名稱:go，代碼行數:76，代碼來源:asm.go

示例7: adddynrel

func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ctxt.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_ARM_PLT32:
		r.Type = obj.R_CALLARM

		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
		}

		return

	case 256 + ld.R_ARM_THM_PC22: // R_ARM_THM_CALL
		ld.Exitf("R_ARM_THM_CALL, are you using -marm?")
		return

	case 256 + ld.R_ARM_GOT32: // R_ARM_GOT_BREL
		if targ.Type != obj.SDYNIMPORT {
			addgotsyminternal(ctxt, targ)
		} else {
			addgotsym(ctxt, targ)
		}

		r.Type = obj.R_CONST // write r->add during relocsym
		r.Sym = nil
		r.Add += int64(targ.Got)
		return

	case 256 + ld.R_ARM_GOT_PREL: // GOT(nil) + A - nil
		if targ.Type != obj.SDYNIMPORT {
			addgotsyminternal(ctxt, targ)
		} else {
			addgotsym(ctxt, targ)
		}

		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(targ.Got) + 4
		return

	case 256 + ld.R_ARM_GOTOFF: // R_ARM_GOTOFF32
		r.Type = obj.R_GOTOFF

		return

	case 256 + ld.R_ARM_GOTPC: // R_ARM_BASE_PREL
		r.Type = obj.R_PCREL

		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += 4
		return

	case 256 + ld.R_ARM_CALL:
		r.Type = obj.R_CALLARM
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add = int64(braddoff(int32(r.Add), targ.Plt/4))
		}

		return

	case 256 + ld.R_ARM_REL32: // R_ARM_REL32
		r.Type = obj.R_PCREL

		r.Add += 4
		return

	case 256 + ld.R_ARM_ABS32:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_ARM_ABS32 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

		// we can just ignore this, because we are targeting ARM V5+ anyway
	case 256 + ld.R_ARM_V4BX:
		if r.Sym != nil {
			// R_ARM_V4BX is ABS relocation, so this symbol is a dummy symbol, ignore it
			r.Sym.Type = 0
		}

		r.Sym = nil
		return

	case 256 + ld.R_ARM_PC24,
		256 + ld.R_ARM_JUMP24:
		r.Type = obj.R_CALLARM
		if targ.Type == obj.SDYNIMPORT {
//.........這裏部分代碼省略.........

開發者ID:SpiderOak，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例8: archreloc

func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		default:
			return -1

		case obj.R_ARM64_GOTPCREL:
			var o1, o2 uint32
			if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
				o1 = uint32(*val >> 32)
				o2 = uint32(*val)
			} else {
				o1 = uint32(*val)
				o2 = uint32(*val >> 32)
			}
			// Any relocation against a function symbol is redirected to
			// be against a local symbol instead (see putelfsym in
			// symtab.go) but unfortunately the system linker was buggy
			// when confronted with a R_AARCH64_ADR_GOT_PAGE relocation
			// against a local symbol until May 2015
			// (https://sourceware.org/bugzilla/show_bug.cgi?id=18270). So
			// we convert the adrp; ld64 + R_ARM64_GOTPCREL into adrp;
			// add + R_ADDRARM64.
			if !(r.Sym.Version != 0 || (r.Sym.Type&obj.SHIDDEN != 0) || r.Sym.Attr.Local()) && r.Sym.Type == obj.STEXT && ld.DynlinkingGo() {
				if o2&0xffc00000 != 0xf9400000 {
					ld.Ctxt.Diag("R_ARM64_GOTPCREL against unexpected instruction %x", o2)
				}
				o2 = 0x91000000 | (o2 & 0x000003ff)
				r.Type = obj.R_ADDRARM64
			}
			if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
				*val = int64(o1)<<32 | int64(o2)
			} else {
				*val = int64(o2)<<32 | int64(o1)
			}
			fallthrough

		case obj.R_ADDRARM64:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym
			r.Xadd = r.Add
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
				ld.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			// Note: ld64 currently has a bug that any non-zero addend for BR26 relocation
			// will make the linking fail because it thinks the code is not PIC even though
			// the BR26 relocation should be fully resolved at link time.
			// That is the reason why the next if block is disabled. When the bug in ld64
			// is fixed, we can enable this block and also enable duff's device in cmd/7g.
			if false && ld.HEADTYPE == obj.Hdarwin {
				var o0, o1 uint32

				if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
					o0 = uint32(*val >> 32)
					o1 = uint32(*val)
				} else {
					o0 = uint32(*val)
					o1 = uint32(*val >> 32)
				}
				// Mach-O wants the addend to be encoded in the instruction
				// Note that although Mach-O supports ARM64_RELOC_ADDEND, it
				// can only encode 24-bit of signed addend, but the instructions
				// supports 33-bit of signed addend, so we always encode the
				// addend in place.
				o0 |= (uint32((r.Xadd>>12)&3) << 29) | (uint32((r.Xadd>>12>>2)&0x7ffff) << 5)
				o1 |= uint32(r.Xadd&0xfff) << 10
				r.Xadd = 0

				// when laid out, the instruction order must always be o1, o2.
				if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
					*val = int64(o0)<<32 | int64(o1)
				} else {
					*val = int64(o1)<<32 | int64(o0)
				}
			}

			return 0

		case obj.R_CALLARM64,
			obj.R_ARM64_TLS_LE,
			obj.R_ARM64_TLS_IE:
			r.Done = 0
			r.Xsym = r.Sym
			r.Xadd = r.Add
			return 0
		}
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
//.........這裏部分代碼省略.........

開發者ID:4ad，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例9: adddynrel

func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) bool {
	targ := r.Sym

	switch r.Type {
	default:
		if r.Type >= 256 {
			ld.Errorf(s, "unexpected relocation type %d", r.Type)
			return false
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_X86_64_PC32:
		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ld.Errorf(s, "unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += 4
		return true

	case 256 + ld.R_X86_64_PLT32:
		r.Type = obj.R_PCREL
		r.Add += 4
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ctxt.Syms.Lookup(".plt", 0)
			r.Add += int64(targ.Plt)
		}

		return true

	case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
				// turn MOVQ of GOT entry into LEAQ of symbol itself
				s.P[r.Off-2] = 0x8d

				r.Type = obj.R_PCREL
				r.Add += 4
				return true
			}
		}

		// fall back to using GOT and hope for the best (CMOV*)
		// TODO: just needs relocation, no need to put in .dynsym
		addgotsym(ctxt, targ)

		r.Type = obj.R_PCREL
		r.Sym = ctxt.Syms.Lookup(".got", 0)
		r.Add += 4
		r.Add += int64(targ.Got)
		return true

	case 256 + ld.R_X86_64_64:
		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return true

	// Handle relocations found in Mach-O object files.
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
		// TODO: What is the difference between all these?
		r.Type = obj.R_ADDR

		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected reloc for dynamic symbol %s", targ.Name)
		}
		return true

	case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ctxt.Syms.Lookup(".plt", 0)
			r.Add = int64(targ.Plt)
			r.Type = obj.R_PCREL
			return true
		}
		fallthrough

		// fall through
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
		r.Type = obj.R_PCREL

		if targ.Type == obj.SDYNIMPORT {
			ld.Errorf(s, "unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
		}
		return true

	case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
		if targ.Type != obj.SDYNIMPORT {
//.........這裏部分代碼省略.........

開發者ID:achanda，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例10: adddynrel

func adddynrel(s *ld.LSym, r *ld.Reloc) {
	targ := r.Sym
	ld.Ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ld.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_X86_64_PC32:
		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected R_X86_64_PC32 relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ld.Diag("unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += 4
		return

	case 256 + ld.R_X86_64_PLT32:
		r.Type = obj.R_PCREL
		r.Add += 4
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(targ)
			r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}

		return

	case 256 + ld.R_X86_64_GOTPCREL, 256 + ld.R_X86_64_GOTPCRELX, 256 + ld.R_X86_64_REX_GOTPCRELX:
		if targ.Type != obj.SDYNIMPORT {
			// have symbol
			if r.Off >= 2 && s.P[r.Off-2] == 0x8b {
				// turn MOVQ of GOT entry into LEAQ of symbol itself
				s.P[r.Off-2] = 0x8d

				r.Type = obj.R_PCREL
				r.Add += 4
				return
			}
		}

		// fall back to using GOT and hope for the best (CMOV*)
		// TODO: just needs relocation, no need to put in .dynsym
		addgotsym(targ)

		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ld.Ctxt, ".got", 0)
		r.Add += 4
		r.Add += int64(targ.Got)
		return

	case 256 + ld.R_X86_64_64:
		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected R_X86_64_64 relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

	// Handle relocations found in Mach-O object files.
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 0,
		512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 0:
		// TODO: What is the difference between all these?
		r.Type = obj.R_ADDR

		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_X86_64_RELOC_BRANCH*2 + 1:
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(targ)
			r.Sym = ld.Linklookup(ld.Ctxt, ".plt", 0)
			r.Add = int64(targ.Plt)
			r.Type = obj.R_PCREL
			return
		}
		fallthrough

		// fall through
	case 512 + ld.MACHO_X86_64_RELOC_UNSIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_1*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_2*2 + 1,
		512 + ld.MACHO_X86_64_RELOC_SIGNED_4*2 + 1:
		r.Type = obj.R_PCREL

		if targ.Type == obj.SDYNIMPORT {
			ld.Diag("unexpected pc-relative reloc for dynamic symbol %s", targ.Name)
		}
		return

	case 512 + ld.MACHO_X86_64_RELOC_GOT_LOAD*2 + 1:
//.........這裏部分代碼省略.........

開發者ID:sreis，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例11: archreloc

func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		default:
			return -1

		case obj.R_ADDRARM64:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym
			r.Xadd = r.Add
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Sect == nil {
				ld.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			// Note: ld64 currently has a bug that any non-zero addend for BR26 relocation
			// will make the linking fail because it thinks the code is not PIC even though
			// the BR26 relocation should be fully resolved at link time.
			// That is the reason why the next if block is disabled. When the bug in ld64
			// is fixed, we can enable this block and also enable duff's device in cmd/7g.
			if false && ld.HEADTYPE == obj.Hdarwin {
				var o0, o1 uint32

				if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
					o0 = uint32(*val >> 32)
					o1 = uint32(*val)
				} else {
					o0 = uint32(*val)
					o1 = uint32(*val >> 32)
				}
				// Mach-O wants the addend to be encoded in the instruction
				// Note that although Mach-O supports ARM64_RELOC_ADDEND, it
				// can only encode 24-bit of signed addend, but the instructions
				// supports 33-bit of signed addend, so we always encode the
				// addend in place.
				o0 |= (uint32((r.Xadd>>12)&3) << 29) | (uint32((r.Xadd>>12>>2)&0x7ffff) << 5)
				o1 |= uint32(r.Xadd&0xfff) << 10
				r.Xadd = 0

				// when laid out, the instruction order must always be o1, o2.
				if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
					*val = int64(o0)<<32 | int64(o1)
				} else {
					*val = int64(o1)<<32 | int64(o0)
				}
			}

			return 0

		case obj.R_CALLARM64,
			obj.R_ARM64_TLS_LE,
			obj.R_ARM64_TLS_IE:
			r.Done = 0
			r.Xsym = r.Sym
			r.Xadd = r.Add
			return 0
		}
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
		return 0

	case obj.R_ADDRARM64:
		t := ld.Symaddr(r.Sym) + r.Add - ((s.Value + int64(r.Off)) &^ 0xfff)
		if t >= 1<<32 || t < -1<<32 {
			ld.Diag("program too large, address relocation distance = %d", t)
		}

		var o0, o1 uint32

		if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
			o0 = uint32(*val >> 32)
			o1 = uint32(*val)
		} else {
			o0 = uint32(*val)
			o1 = uint32(*val >> 32)
		}

		o0 |= (uint32((t>>12)&3) << 29) | (uint32((t>>12>>2)&0x7ffff) << 5)
		o1 |= uint32(t&0xfff) << 10

		// when laid out, the instruction order must always be o1, o2.
		if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
			*val = int64(o0)<<32 | int64(o1)
		} else {
			*val = int64(o1)<<32 | int64(o0)
		}
//.........這裏部分代碼省略.........

開發者ID:jeremiahyan，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例12: adddynrel

func adddynrel(ctxt *ld.Link, s *ld.Symbol, r *ld.Reloc) {
	targ := r.Sym
	ctxt.Cursym = s

	switch r.Type {
	default:
		if r.Type >= 256 {
			ctxt.Diag("unexpected relocation type %d", r.Type)
			return
		}

		// Handle relocations found in ELF object files.
	case 256 + ld.R_390_12,
		256 + ld.R_390_GOT12:
		ctxt.Diag("s390x 12-bit relocations have not been implemented (relocation type %d)", r.Type-256)
		return

	case 256 + ld.R_390_8,
		256 + ld.R_390_16,
		256 + ld.R_390_32,
		256 + ld.R_390_64:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_390_nn relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_ADDR
		return

	case 256 + ld.R_390_PC16,
		256 + ld.R_390_PC32,
		256 + ld.R_390_PC64:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_390_PCnn relocation for dynamic symbol %s", targ.Name)
		}
		if targ.Type == 0 || targ.Type == obj.SXREF {
			ctxt.Diag("unknown symbol %s in pcrel", targ.Name)
		}
		r.Type = obj.R_PCREL
		r.Add += int64(r.Siz)
		return

	case 256 + ld.R_390_GOT16,
		256 + ld.R_390_GOT32,
		256 + ld.R_390_GOT64:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)
		return

	case 256 + ld.R_390_PLT16DBL,
		256 + ld.R_390_PLT32DBL:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_390_DBL
		r.Add += int64(r.Siz)
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}
		return

	case 256 + ld.R_390_PLT32,
		256 + ld.R_390_PLT64:
		r.Type = obj.R_PCREL
		r.Add += int64(r.Siz)
		if targ.Type == obj.SDYNIMPORT {
			addpltsym(ctxt, targ)
			r.Sym = ld.Linklookup(ctxt, ".plt", 0)
			r.Add += int64(targ.Plt)
		}
		return

	case 256 + ld.R_390_COPY:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_GLOB_DAT:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_JMP_SLOT:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_RELATIVE:
		ctxt.Diag("unimplemented S390x relocation: %v", r.Type-256)

	case 256 + ld.R_390_GOTOFF:
		if targ.Type == obj.SDYNIMPORT {
			ctxt.Diag("unexpected R_390_GOTOFF relocation for dynamic symbol %s", targ.Name)
		}
		r.Type = obj.R_GOTOFF
		return

	case 256 + ld.R_390_GOTPC:
		r.Type = obj.R_PCREL
		r.Sym = ld.Linklookup(ctxt, ".got", 0)
		r.Add += int64(r.Siz)
		return

	case 256 + ld.R_390_PC16DBL,
		256 + ld.R_390_PC32DBL:
		r.Type = obj.R_PCREL
		r.Variant = ld.RV_390_DBL
		r.Add += int64(r.Siz)
		if targ.Type == obj.SDYNIMPORT {
//.........這裏部分代碼省略.........

開發者ID:hurkgu，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例13: genplt

func genplt() {
	var s *ld.LSym
	var stub *ld.LSym
	var pprevtextp **ld.LSym
	var r *ld.Reloc
	var n string
	var o1 uint32
	var i int

	// The ppc64 ABI PLT has similar concepts to other
	// architectures, but is laid out quite differently.  When we
	// see an R_PPC64_REL24 relocation to a dynamic symbol
	// (indicating that the call needs to go through the PLT), we
	// generate up to three stubs and reserve a PLT slot.
	//
	// 1) The call site will be bl x; nop (where the relocation
	//    applies to the bl).  We rewrite this to bl x_stub; ld
	//    r2,24(r1).  The ld is necessary because x_stub will save
	//    r2 (the TOC pointer) at 24(r1) (the "TOC save slot").
	//
	// 2) We reserve space for a pointer in the .plt section (once
	//    per referenced dynamic function).  .plt is a data
	//    section filled solely by the dynamic linker (more like
	//    .plt.got on other architectures).  Initially, the
	//    dynamic linker will fill each slot with a pointer to the
	//    corresponding [email protected] entry point.
	//
	// 3) We generate the "call stub" x_stub (once per dynamic
	//    function/object file pair).  This saves the TOC in the
	//    TOC save slot, reads the function pointer from x's .plt
	//    slot and calls it like any other global entry point
	//    (including setting r12 to the function address).
	//
	// 4) We generate the "symbol resolver stub" [email protected] (once per
	//    dynamic function).  This is solely a branch to the glink
	//    resolver stub.
	//
	// 5) We generate the glink resolver stub (only once).  This
	//    computes which symbol resolver stub we came through and
	//    invokes the dynamic resolver via a pointer provided by
	//    the dynamic linker.  This will patch up the .plt slot to
	//    point directly at the function so future calls go
	//    straight from the call stub to the real function, and
	//    then call the function.

	// NOTE: It's possible we could make ppc64 closer to other
	// architectures: ppc64's .plt is like .plt.got on other
	// platforms and ppc64's .glink is like .plt on other
	// platforms.

	// Find all R_PPC64_REL24 relocations that reference dynamic
	// imports.  Reserve PLT entries for these symbols and
	// generate call stubs.  The call stubs need to live in .text,
	// which is why we need to do this pass this early.
	//
	// This assumes "case 1" from the ABI, where the caller needs
	// us to save and restore the TOC pointer.
	pprevtextp = &ld.Ctxt.Textp

	for s = *pprevtextp; s != nil; pprevtextp, s = &s.Next, s.Next {
		for i = range s.R {
			r = &s.R[i]
			if r.Type != 256+ld.R_PPC64_REL24 || r.Sym.Type != obj.SDYNIMPORT {
				continue
			}

			// Reserve PLT entry and generate symbol
			// resolver
			addpltsym(ld.Ctxt, r.Sym)

			// Generate call stub
			n = fmt.Sprintf("%s.%s", s.Name, r.Sym.Name)

			stub = ld.Linklookup(ld.Ctxt, n, 0)
			stub.Reachable = stub.Reachable || s.Reachable
			if stub.Size == 0 {
				// Need outer to resolve .TOC.
				stub.Outer = s

				// Link in to textp before s (we could
				// do it after, but would have to skip
				// the subsymbols)
				*pprevtextp = stub

				stub.Next = s
				pprevtextp = &stub.Next

				gencallstub(1, stub, r.Sym)
			}

			// Update the relocation to use the call stub
			r.Sym = stub

			// Restore TOC after bl.  The compiler put a
			// nop here for us to overwrite.
			o1 = 0xe8410018 // ld r2,24(r1)
			ld.Ctxt.Arch.ByteOrder.PutUint32(s.P[r.Off+4:], o1)
		}
	}

//.........這裏部分代碼省略.........

開發者ID:danny8002，項目名稱:go，代碼行數:101，代碼來源:asm.go

示例14: archreloc

func archreloc(r *ld.Reloc, s *ld.LSym, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		default:
			return -1

		case obj.R_ADDRARM64:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym
			r.Xadd = r.Add
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Sect == nil {
				ld.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			// the first instruction is always at the lower address, this is endian neutral;
			// but note that o0 and o1 should still use the target endian.
			o0 := ld.Thelinkarch.ByteOrder.Uint32(s.P[r.Off : r.Off+4])
			o1 := ld.Thelinkarch.ByteOrder.Uint32(s.P[r.Off+4 : r.Off+8])

			// Note: ld64 currently has a bug that any non-zero addend for BR26 relocation
			// will make the linking fail because it thinks the code is not PIC even though
			// the BR26 relocation should be fully resolved at link time.
			// That is the reason why the next if block is disabled. When the bug in ld64
			// is fixed, we can enable this block and also enable duff's device in cmd/7g.
			if false && ld.HEADTYPE == obj.Hdarwin {
				// Mach-O wants the addend to be encoded in the instruction
				// Note that although Mach-O supports ARM64_RELOC_ADDEND, it
				// can only encode 24-bit of signed addend, but the instructions
				// supports 33-bit of signed addend, so we always encode the
				// addend in place.
				o0 |= (uint32((r.Xadd>>12)&3) << 29) | (uint32((r.Xadd>>12>>2)&0x7ffff) << 5)
				o1 |= uint32(r.Xadd&0xfff) << 10
				r.Xadd = 0
			}

			// when laid out, the instruction order must always be o1, o2.
			if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
				*val = int64(o0)<<32 | int64(o1)
			} else {
				*val = int64(o1)<<32 | int64(o0)
			}

			return 0

		case obj.R_CALLARM64:
			r.Done = 0
			r.Xsym = r.Sym
			*val = int64(0xfc000000 & uint32(r.Add))
			r.Xadd = int64((uint32(r.Add) &^ 0xfc000000) * 4)
			r.Add = 0
			return 0
		}
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
		return 0

	case obj.R_ADDRARM64:
		t := ld.Symaddr(r.Sym) + r.Add - ((s.Value + int64(r.Off)) &^ 0xfff)
		if t >= 1<<32 || t < -1<<32 {
			ld.Diag("program too large, address relocation distance = %d", t)
		}

		// the first instruction is always at the lower address, this is endian neutral;
		// but note that o0 and o1 should still use the target endian.
		o0 := ld.Thelinkarch.ByteOrder.Uint32(s.P[r.Off : r.Off+4])
		o1 := ld.Thelinkarch.ByteOrder.Uint32(s.P[r.Off+4 : r.Off+8])

		o0 |= (uint32((t>>12)&3) << 29) | (uint32((t>>12>>2)&0x7ffff) << 5)
		o1 |= uint32(t&0xfff) << 10

		// when laid out, the instruction order must always be o1, o2.
		if ld.Ctxt.Arch.ByteOrder == binary.BigEndian {
			*val = int64(o0)<<32 | int64(o1)
		} else {
			*val = int64(o1)<<32 | int64(o0)
		}
		return 0

	case obj.R_CALLARM64:
		*val = int64((0xfc000000 & uint32(r.Add)) | uint32((ld.Symaddr(r.Sym)+r.Add*4-(s.Value+int64(r.Off)))/4))
		return 0
	}

	return -1
}

開發者ID:wheelcomplex，項目名稱:go-1，代碼行數:100，代碼來源:asm.go

示例15: archreloc

func archreloc(r *ld.Reloc, s *ld.Symbol, val *int64) int {
	if ld.Linkmode == ld.LinkExternal {
		switch r.Type {
		default:
			return -1

		case obj.R_POWER_TLS, obj.R_POWER_TLS_LE, obj.R_POWER_TLS_IE:
			r.Done = 0
			// check Outer is nil, Type is TLSBSS?
			r.Xadd = r.Add
			r.Xsym = r.Sym
			return 0

		case obj.R_ADDRPOWER,
			obj.R_ADDRPOWER_DS,
			obj.R_ADDRPOWER_TOCREL,
			obj.R_ADDRPOWER_TOCREL_DS,
			obj.R_ADDRPOWER_GOT,
			obj.R_ADDRPOWER_PCREL:
			r.Done = 0

			// set up addend for eventual relocation via outer symbol.
			rs := r.Sym
			r.Xadd = r.Add
			for rs.Outer != nil {
				r.Xadd += ld.Symaddr(rs) - ld.Symaddr(rs.Outer)
				rs = rs.Outer
			}

			if rs.Type != obj.SHOSTOBJ && rs.Type != obj.SDYNIMPORT && rs.Sect == nil {
				ld.Diag("missing section for %s", rs.Name)
			}
			r.Xsym = rs

			return 0

		case obj.R_CALLPOWER:
			r.Done = 0
			r.Xsym = r.Sym
			r.Xadd = r.Add
			return 0
		}
	}

	switch r.Type {
	case obj.R_CONST:
		*val = r.Add
		return 0

	case obj.R_GOTOFF:
		*val = ld.Symaddr(r.Sym) + r.Add - ld.Symaddr(ld.Linklookup(ld.Ctxt, ".got", 0))
		return 0

	case obj.R_ADDRPOWER, obj.R_ADDRPOWER_DS:
		return archrelocaddr(r, s, val)

	case obj.R_CALLPOWER:
		// Bits 6 through 29 = (S + A - P) >> 2

		t := ld.Symaddr(r.Sym) + r.Add - (s.Value + int64(r.Off))
		if t&3 != 0 {
			ld.Ctxt.Diag("relocation for %s+%d is not aligned: %d", r.Sym.Name, r.Off, t)
		}
		if int64(int32(t<<6)>>6) != t {
			// TODO(austin) This can happen if text > 32M.
			// Add a call trampoline to .text in that case.
			ld.Ctxt.Diag("relocation for %s+%d is too big: %d", r.Sym.Name, r.Off, t)
		}

		*val |= int64(uint32(t) &^ 0xfc000003)
		return 0

	case obj.R_POWER_TOC: // S + A - .TOC.
		*val = ld.Symaddr(r.Sym) + r.Add - symtoc(s)

		return 0

	case obj.R_POWER_TLS_LE:
		// The thread pointer points 0x7000 bytes after the start of the the
		// thread local storage area as documented in section "3.7.2 TLS
		// Runtime Handling" of "Power Architecture 64-Bit ELF V2 ABI
		// Specification".
		v := r.Sym.Value - 0x7000
		if int64(int16(v)) != v {
			ld.Diag("TLS offset out of range %d", v)
		}
		*val = (*val &^ 0xffff) | (v & 0xffff)
		return 0
	}

	return -1
}

開發者ID:Mokolea，項目名稱:go，代碼行數:92，代碼來源:asm.go

注：本文中的cmd/link/internal/ld.Reloc類示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。