Golang Prog.Spadj方法代碼示例

本文整理匯總了Golang中cmd/internal/obj.Prog.Spadj方法的典型用法代碼示例。如果您正苦於以下問題：Golang Prog.Spadj方法的具體用法？Golang Prog.Spadj怎麽用？Golang Prog.Spadj使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類cmd/internal/obj.Prog的用法示例。

在下文中一共展示了Prog.Spadj方法的9個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。

示例1: preprocess


//.........這裏部分代碼省略.........
			p.To.Offset = int64(ctxt.Autosize) - 8
			if ctxt.Autosize == 0 && !(cursym.Text.Mark&LEAF != 0) {
				if ctxt.Debugvlog != 0 {
					ctxt.Logf("save suppressed in: %s\n", cursym.Text.From.Sym.Name)
				}
				cursym.Text.Mark |= LEAF
			}

			if !(p.From3.Offset&obj.NOSPLIT != 0) {
				p = stacksplit(ctxt, p, ctxt.Autosize) // emit split check
			}

			aoffset = ctxt.Autosize
			if aoffset > 0xF0 {
				aoffset = 0xF0
			}
			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = true
				if ctxt.Autosize == 0 {
					break
				}
				aoffset = 0
			}

			q = p
			if ctxt.Autosize > aoffset {
				q = ctxt.NewProg()
				q.As = ASUB
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = int64(ctxt.Autosize) - int64(aoffset)
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGSP
				q.Spadj = int32(q.From.Offset)
				q.Link = p.Link
				p.Link = q
				if cursym.Text.Mark&LEAF != 0 {
					break
				}
			}

			q1 = ctxt.NewProg()
			q1.As = AMOVD
			q1.Lineno = p.Lineno
			q1.From.Type = obj.TYPE_REG
			q1.From.Reg = REGLINK
			q1.To.Type = obj.TYPE_MEM
			q1.Scond = C_XPRE
			q1.To.Offset = int64(-aoffset)
			q1.To.Reg = REGSP
			q1.Link = q.Link
			q1.Spadj = aoffset
			q.Link = q1

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOV g_panic(g), R1
				//	CMP ZR, R1
				//	BEQ end
				//	MOV panic_argp(R1), R2
				//	ADD $(autosize+8), RSP, R3
				//	CMP R2, R3
				//	BNE end
				//	ADD $8, RSP, R4
				//	MOVD R4, panic_argp(R1)

開發者ID:hurkgu，項目名稱:go，代碼行數:67，代碼來源:obj7.go

示例2: preprocess


//.........這裏部分代碼省略.........
				q.As = AWORD
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = 0x3c4c0000
				q = obj.Appendp(ctxt, q)
				q.As = AWORD
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = 0x38420000
				rel := obj.Addrel(ctxt.Cursym)
				rel.Off = 0
				rel.Siz = 8
				rel.Sym = obj.Linklookup(ctxt, ".TOC.", 0)
				rel.Type = obj.R_ADDRPOWER_PCREL
			}

			if cursym.Text.From3.Offset&obj.NOSPLIT == 0 {
				q = stacksplit(ctxt, q, autosize) // emit split check
			}

			if autosize != 0 {
				/* use MOVDU to adjust R1 when saving R31, if autosize is small */
				if cursym.Text.Mark&LEAF == 0 && autosize >= -BIG && autosize <= BIG {
					mov = AMOVDU
					aoffset = int(-autosize)
				} else {
					q = obj.Appendp(ctxt, q)
					q.As = AADD
					q.Lineno = p.Lineno
					q.From.Type = obj.TYPE_CONST
					q.From.Offset = int64(-autosize)
					q.To.Type = obj.TYPE_REG
					q.To.Reg = REGSP
					q.Spadj = +autosize
				}
			} else if cursym.Text.Mark&LEAF == 0 {
				// A very few functions that do not return to their caller
				// (e.g. gogo) are not identified as leaves but still have
				// no frame.
				cursym.Text.Mark |= LEAF
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = 1
				break
			}

			q = obj.Appendp(ctxt, q)
			q.As = AMOVD
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REG_LR
			q.To.Type = obj.TYPE_REG
			q.To.Reg = REGTMP

			q = obj.Appendp(ctxt, q)
			q.As = int16(mov)
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REGTMP
			q.To.Type = obj.TYPE_MEM
			q.To.Offset = int64(aoffset)
			q.To.Reg = REGSP
			if q.As == AMOVDU {
				q.Spadj = int32(-aoffset)
			}

開發者ID:gmwu，項目名稱:go，代碼行數:67，代碼來源:obj9.go

示例3: preprocess


//.........這裏部分代碼省略.........
				}
			}

			if autosize == 0 && cursym.Text.Mark&LEAF == 0 {
				if ctxt.Debugvlog != 0 {
					fmt.Fprintf(ctxt.Bso, "save suppressed in: %s\n", cursym.Name)
					obj.Bflush(ctxt.Bso)
				}

				cursym.Text.Mark |= LEAF
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = 1
				if autosize == 0 {
					break
				}
			}

			if p.From3.Offset&obj.NOSPLIT == 0 {
				p = stacksplit(ctxt, p, autosize, cursym.Text.From3.Offset&obj.NEEDCTXT == 0) // emit split check
			}

			// MOVW.W		R14,$-autosize(SP)
			p = obj.Appendp(ctxt, p)

			p.As = AMOVW
			p.Scond |= C_WBIT
			p.From.Type = obj.TYPE_REG
			p.From.Reg = REGLINK
			p.To.Type = obj.TYPE_MEM
			p.To.Offset = int64(-autosize)
			p.To.Reg = REGSP
			p.Spadj = autosize

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOVW g_panic(g), R1
				//	CMP $0, R1
				//	B.EQ end
				//	MOVW panic_argp(R1), R2
				//	ADD $(autosize+4), R13, R3
				//	CMP R2, R3
				//	B.NE end
				//	ADD $4, R13, R4
				//	MOVW R4, panic_argp(R1)
				// end:
				//	NOP
				//
				// The NOP is needed to give the jumps somewhere to land.
				// It is a liblink NOP, not an ARM NOP: it encodes to 0 instruction bytes.

				p = obj.Appendp(ctxt, p)

				p.As = AMOVW
				p.From.Type = obj.TYPE_MEM
				p.From.Reg = REGG
				p.From.Offset = 4 * int64(ctxt.Arch.Ptrsize) // G.panic
				p.To.Type = obj.TYPE_REG
				p.To.Reg = REG_R1

				p = obj.Appendp(ctxt, p)
				p.As = ACMP
				p.From.Type = obj.TYPE_CONST
				p.From.Offset = 0

開發者ID:klueska，項目名稱:go-akaros，代碼行數:67，代碼來源:obj5.go

示例4: preprocess


//.........這裏部分代碼省略.........
				autosize += 4
			}

			p.To.Offset = int64(autosize) - ctxt.FixedFrameSize()

			if p.From3.Offset&obj.NOSPLIT == 0 {
				p = stacksplit(ctxt, p, autosize) // emit split check
			}

			q = p

			if autosize != 0 {
				// Make sure to save link register for non-empty frame, even if
				// it is a leaf function, so that traceback works.
				// Store link register before decrement SP, so if a signal comes
				// during the execution of the function prologue, the traceback
				// code will not see a half-updated stack frame.
				q = obj.Appendp(ctxt, q)
				q.As = mov
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_REG
				q.From.Reg = REGLINK
				q.To.Type = obj.TYPE_MEM
				q.To.Offset = int64(-autosize)
				q.To.Reg = REGSP

				q = obj.Appendp(ctxt, q)
				q.As = add
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = int64(-autosize)
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGSP
				q.Spadj = +autosize
			} else if cursym.Text.Mark&LEAF == 0 {
				if cursym.Text.From3.Offset&obj.NOSPLIT != 0 {
					if ctxt.Debugvlog != 0 {
						ctxt.Logf("save suppressed in: %s\n", cursym.Name)
					}

					cursym.Text.Mark |= LEAF
				}
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Set(obj.AttrLeaf, true)
				break
			}

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOV	g_panic(g), R1
				//	BEQ	R1, end
				//	MOV	panic_argp(R1), R2
				//	ADD	$(autosize+FIXED_FRAME), R29, R3
				//	BNE	R2, R3, end
				//	ADD	$FIXED_FRAME, R29, R2
				//	MOV	R2, panic_argp(R1)
				// end:
				//	NOP
				//
				// The NOP is needed to give the jumps somewhere to land.
				// It is a liblink NOP, not an mips NOP: it encodes to 0 instruction bytes.

				q = obj.Appendp(ctxt, q)

開發者ID:Harvey-OS，項目名稱:go，代碼行數:67，代碼來源:obj0.go

示例5: preprocess


//.........這裏部分代碼省略.........
		switch p.As {
		case obj.ATEXT:
			autosize = int32(textstksiz)

			if p.Mark&LEAF != 0 && autosize == 0 && p.From3.Offset&obj.NOFRAME == 0 {
				// A leaf function with no locals has no frame.
				p.From3.Offset |= obj.NOFRAME
			}

			if p.From3.Offset&obj.NOFRAME == 0 {
				// If there is a stack frame at all, it includes
				// space to save the LR.
				autosize += int32(ctxt.FixedFrameSize())
			}

			p.To.Offset = int64(autosize)

			q = p

			if p.From3.Offset&obj.NOSPLIT == 0 && p.From3.Offset&obj.NOFRAME == 0 {
				p, pPreempt = stacksplitPre(ctxt, p, autosize) // emit pre part of split check
				pPre = p
				wasSplit = true //need post part of split
			}

			if autosize != 0 {
				q = obj.Appendp(ctxt, p)
				q.As = AMOVD
				q.From.Type = obj.TYPE_ADDR
				q.From.Offset = int64(-autosize)
				q.From.Reg = REGSP // not actually needed - REGSP is assumed if no reg is provided
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGSP
				q.Spadj = autosize
			} else if cursym.Text.Mark&LEAF == 0 {
				// A very few functions that do not return to their caller
				// (e.g. gogo) are not identified as leaves but still have
				// no frame.
				cursym.Text.Mark |= LEAF
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = true
				break
			}

			q = obj.Appendp(ctxt, q)
			q.As = AMOVD
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REG_LR
			q.To.Type = obj.TYPE_MEM
			q.To.Reg = REGSP
			q.To.Offset = 0

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOVD g_panic(g), R3
				//	CMP R3, $0
				//	BEQ end
				//	MOVD panic_argp(R3), R4
				//	ADD $(autosize+8), R1, R5
				//	CMP R4, R5
				//	BNE end
				//	ADD $8, R1, R6
				//	MOVD R6, panic_argp(R3)

開發者ID:kuangchanglang，項目名稱:go，代碼行數:67，代碼來源:objz.go

示例6: preprocess


//.........這裏部分代碼省略.........
		}
	}

	autosize := int32(0)
	var o int
	var p1 *obj.Prog
	var p2 *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		o = int(p.As)
		switch o {
		case obj.ATEXT:
			autosize = int32(textstksiz + 8)
			if (p.Mark&LEAF != 0) && autosize <= 8 {
				autosize = 0
			} else if autosize&4 != 0 {
				autosize += 4
			}
			p.To.Offset = int64(autosize) - 8

			if p.From3.Offset&obj.NOSPLIT == 0 {
				p = stacksplit(ctxt, p, autosize) // emit split check
			}

			q = p

			if autosize != 0 {
				q = obj.Appendp(ctxt, p)
				q.As = AADDV
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = int64(-autosize)
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGSP
				q.Spadj = +autosize
			} else if cursym.Text.Mark&LEAF == 0 {
				if cursym.Text.From3.Offset&obj.NOSPLIT != 0 {
					if ctxt.Debugvlog != 0 {
						fmt.Fprintf(ctxt.Bso, "save suppressed in: %s\n", cursym.Name)
						ctxt.Bso.Flush()
					}

					cursym.Text.Mark |= LEAF
				}
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = 1
				break
			}

			q = obj.Appendp(ctxt, q)
			q.As = AMOVV
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REGLINK
			q.To.Type = obj.TYPE_MEM
			q.To.Offset = int64(0)
			q.To.Reg = REGSP

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOVV	g_panic(g), R1
				//	BEQ		R1, end
				//	MOVV	panic_argp(R1), R2
				//	ADDV	$(autosize+8), R29, R3

開發者ID:sreis，項目名稱:go，代碼行數:67，代碼來源:obj0.go

示例7: preprocess


//.........這裏部分代碼省略.........
			if ctxt.Autosize == 0 && !(cursym.Text.Mark&LEAF != 0) {
				if ctxt.Debugvlog != 0 {
					fmt.Fprintf(ctxt.Bso, "save suppressed in: %s\n", cursym.Text.From.Sym.Name)
				}
				obj.Bflush(ctxt.Bso)
				cursym.Text.Mark |= LEAF
			}

			if !(p.From3.Offset&obj.NOSPLIT != 0) {
				p = stacksplit(ctxt, p, ctxt.Autosize, bool2int(cursym.Text.From3.Offset&obj.NEEDCTXT == 0)) // emit split check
			}

			aoffset = ctxt.Autosize
			if aoffset > 0xF0 {
				aoffset = 0xF0
			}
			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = 1
				if ctxt.Autosize == 0 {
					break
				}
				aoffset = 0
			}

			q = p
			if ctxt.Autosize > aoffset {
				q = ctxt.NewProg()
				q.As = ASUB
				q.Lineno = p.Lineno
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = int64(ctxt.Autosize) - int64(aoffset)
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGSP
				q.Spadj = int32(q.From.Offset)
				q.Link = p.Link
				p.Link = q
				if cursym.Text.Mark&LEAF != 0 {
					break
				}
			}

			q1 = ctxt.NewProg()
			q1.As = AMOVD
			q1.Lineno = p.Lineno
			q1.From.Type = obj.TYPE_REG
			q1.From.Reg = REGLINK
			q1.To.Type = obj.TYPE_MEM
			q1.Scond = C_XPRE
			q1.To.Offset = int64(-aoffset)
			q1.To.Reg = REGSP
			q1.Link = q.Link
			q1.Spadj = aoffset
			q.Link = q1

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOV g_panic(g), R1
				//	CMP ZR, R1
				//	BEQ end
				//	MOV panic_argp(R1), R2
				//	ADD $(autosize+8), RSP, R3
				//	CMP R2, R3
				//	BNE end
				//	ADD $8, RSP, R4
				//	MOVD R4, panic_argp(R1)

開發者ID:klueska，項目名稱:go-akaros，代碼行數:67，代碼來源:obj7.go

示例8: preprocess


//.........這裏部分代碼省略.........
	for p := cursym.Text; p != nil; p = p.Link {
		o = int(p.As)
		switch o {
		case obj.ATEXT:
			mov = AMOVD
			aoffset = 0
			autosize = int32(textstksiz + 8)
			if (p.Mark&LEAF != 0) && autosize <= 8 {
				autosize = 0
			} else if autosize&4 != 0 {
				autosize += 4
			}
			p.To.Offset = int64(autosize) - 8

			if p.From3.Offset&obj.NOSPLIT == 0 {
				p = stacksplit(ctxt, p, autosize, cursym.Text.From3.Offset&obj.NEEDCTXT == 0) // emit split check
			}

			q = p

			if autosize != 0 {
				/* use MOVDU to adjust R1 when saving R31, if autosize is small */
				if cursym.Text.Mark&LEAF == 0 && autosize >= -BIG && autosize <= BIG {
					mov = AMOVDU
					aoffset = int(-autosize)
				} else {
					q = obj.Appendp(ctxt, p)
					q.As = AADD
					q.Lineno = p.Lineno
					q.From.Type = obj.TYPE_CONST
					q.From.Offset = int64(-autosize)
					q.To.Type = obj.TYPE_REG
					q.To.Reg = REGSP
					q.Spadj = +autosize
				}
			} else if cursym.Text.Mark&LEAF == 0 {
				if ctxt.Debugvlog != 0 {
					fmt.Fprintf(ctxt.Bso, "save suppressed in: %s\n", cursym.Name)
					obj.Bflush(ctxt.Bso)
				}

				cursym.Text.Mark |= LEAF
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = 1
				break
			}

			q = obj.Appendp(ctxt, q)
			q.As = AMOVD
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REG_LR
			q.To.Type = obj.TYPE_REG
			q.To.Reg = REGTMP

			q = obj.Appendp(ctxt, q)
			q.As = int16(mov)
			q.Lineno = p.Lineno
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REGTMP
			q.To.Type = obj.TYPE_MEM
			q.To.Offset = int64(aoffset)
			q.To.Reg = REGSP
			if q.As == AMOVDU {

開發者ID:xslonepiece，項目名稱:goios，代碼行數:67，代碼來源:obj9.go

示例9: preprocess


//.........這裏部分代碼省略.........
			q = p
			continue
		}
	}

	autosize := int32(0)
	var o int
	var p1 *obj.Prog
	var p2 *obj.Prog
	for p := cursym.Text; p != nil; p = p.Link {
		o = int(p.As)
		switch o {
		case obj.ATEXT:
			autosize = int32(textstksiz + 8)
			if (p.Mark&LEAF != 0) && autosize <= 8 {
				autosize = 0
			} else if autosize&4 != 0 {
				autosize += 4
			}
			p.To.Offset = int64(autosize) - 8
			if p.From3.Offset&obj.NOSPLIT == 0 {
				p = stacksplit(ctxt, p, autosize) // emit split check
			}

			q = p

			if autosize != 0 {
				q = obj.Appendp(ctxt, p)
				q.As = AADD
				q.From.Type = obj.TYPE_CONST
				q.From.Offset = int64(-autosize)
				q.To.Type = obj.TYPE_REG
				q.To.Reg = REGSP
				q.Spadj = autosize
			} else if cursym.Text.Mark&LEAF == 0 {
				if ctxt.Debugvlog != 0 {
					fmt.Fprintf(ctxt.Bso, "save suppressed in: %s\n", cursym.Name)
					ctxt.Bso.Flush()
				}
				cursym.Text.Mark |= LEAF
			}

			if cursym.Text.Mark&LEAF != 0 {
				cursym.Leaf = 1
				break
			}

			q = obj.Appendp(ctxt, q)
			q.As = AMOVD
			q.From.Type = obj.TYPE_REG
			q.From.Reg = REG_LR
			q.To.Type = obj.TYPE_MEM
			q.To.Reg = REGSP
			q.To.Offset = 0

			if cursym.Text.From3.Offset&obj.WRAPPER != 0 {
				// if(g->panic != nil && g->panic->argp == FP) g->panic->argp = bottom-of-frame
				//
				//	MOVD g_panic(g), R3
				//	CMP R0, R3
				//	BEQ end
				//	MOVD panic_argp(R3), R4
				//	ADD $(autosize+8), R1, R5
				//	CMP R4, R5
				//	BNE end
				//	ADD $8, R1, R6

開發者ID:wycharry，項目名稱:go，代碼行數:67，代碼來源:objz.go

注：本文中的cmd/internal/obj.Prog.Spadj方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。