本文整理匯總了Golang中cmd/internal/gc.Node.Reg方法的典型用法代碼示例。如果您正苦於以下問題：Golang Node.Reg方法的具體用法？Golang Node.Reg怎麽用？Golang Node.Reg使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類cmd/internal/gc.Node的用法示例。
在下文中一共展示了Node.Reg方法的2個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的Golang代碼示例。
示例1: blockcopy
func blockcopy(n, res *gc.Node, osrc, odst, w int64) {
// determine alignment.
// want to avoid unaligned access, so have to use
// smaller operations for less aligned types.
// for example moving [4]byte must use 4 MOVB not 1 MOVW.
align := int(n.Type.Align)
var op int
switch align {
default:
gc.Fatal("sgen: invalid alignment %d for %v", align, n.Type)
case 1:
op = arm.AMOVB
case 2:
op = arm.AMOVH
case 4:
op = arm.AMOVW
}
if w%int64(align) != 0 {
gc.Fatal("sgen: unaligned size %d (align=%d) for %v", w, align, n.Type)
}
c := int32(w / int64(align))
if osrc%int64(align) != 0 || odst%int64(align) != 0 {
gc.Fatal("sgen: unaligned offset src %d or dst %d (align %d)", osrc, odst, align)
}
// if we are copying forward on the stack and
// the src and dst overlap, then reverse direction
dir := align
if osrc < odst && int64(odst) < int64(osrc)+w {
dir = -dir
}
if op == arm.AMOVW && !gc.Nacl && dir > 0 && c >= 4 && c <= 128 {
var r0 gc.Node
r0.Op = gc.OREGISTER
r0.Reg = arm.REG_R0
var r1 gc.Node
r1.Op = gc.OREGISTER
r1.Reg = arm.REG_R0 + 1
var r2 gc.Node
r2.Op = gc.OREGISTER
r2.Reg = arm.REG_R0 + 2
var src gc.Node
gc.Regalloc(&src, gc.Types[gc.Tptr], &r1)
var dst gc.Node
gc.Regalloc(&dst, gc.Types[gc.Tptr], &r2)
if n.Ullman >= res.Ullman {
// eval n first
gc.Agen(n, &src)
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
} else {
// eval res first
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
gc.Agen(n, &src)
}
var tmp gc.Node
gc.Regalloc(&tmp, gc.Types[gc.Tptr], &r0)
f := gc.Sysfunc("duffcopy")
p := gins(obj.ADUFFCOPY, nil, f)
gc.Afunclit(&p.To, f)
// 8 and 128 = magic constants: see ../../runtime/asm_arm.s
p.To.Offset = 8 * (128 - int64(c))
gc.Regfree(&tmp)
gc.Regfree(&src)
gc.Regfree(&dst)
return
}
var dst gc.Node
var src gc.Node
if n.Ullman >= res.Ullman {
gc.Agenr(n, &dst, res) // temporarily use dst
gc.Regalloc(&src, gc.Types[gc.Tptr], nil)
gins(arm.AMOVW, &dst, &src)
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agen(res, &dst)
} else {
if res.Op == gc.ONAME {
gc.Gvardef(res)
}
gc.Agenr(res, &dst, res)
//.........這裏部分代碼省略.........
示例2: clearfat
func clearfat(nl *gc.Node) {
/* clear a fat object */
if gc.Debug['g'] != 0 {
gc.Dump("\nclearfat", nl)
}
w := uint32(nl.Type.Width)
// Avoid taking the address for simple enough types.
if gc.Componentgen(nil, nl) {
return
}
c := w % 4 // bytes
q := w / 4 // quads
var r0 gc.Node
r0.Op = gc.OREGISTER
r0.Reg = arm.REG_R0
var r1 gc.Node
r1.Op = gc.OREGISTER
r1.Reg = arm.REG_R1
var dst gc.Node
gc.Regalloc(&dst, gc.Types[gc.Tptr], &r1)
gc.Agen(nl, &dst)
var nc gc.Node
gc.Nodconst(&nc, gc.Types[gc.TUINT32], 0)
var nz gc.Node
gc.Regalloc(&nz, gc.Types[gc.TUINT32], &r0)
gc.Cgen(&nc, &nz)
if q > 128 {
var end gc.Node
gc.Regalloc(&end, gc.Types[gc.Tptr], nil)
p := gins(arm.AMOVW, &dst, &end)
p.From.Type = obj.TYPE_ADDR
p.From.Offset = int64(q) * 4
p = gins(arm.AMOVW, &nz, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 4
p.Scond |= arm.C_PBIT
pl := p
p = gins(arm.ACMP, &dst, nil)
raddr(&end, p)
gc.Patch(gc.Gbranch(arm.ABNE, nil, 0), pl)
gc.Regfree(&end)
} else if q >= 4 && !gc.Nacl {
f := gc.Sysfunc("duffzero")
p := gins(obj.ADUFFZERO, nil, f)
gc.Afunclit(&p.To, f)
// 4 and 128 = magic constants: see ../../runtime/asm_arm.s
p.To.Offset = 4 * (128 - int64(q))
} else {
var p *obj.Prog
for q > 0 {
p = gins(arm.AMOVW, &nz, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 4
p.Scond |= arm.C_PBIT
//print("1. %P\n", p);
q--
}
}
var p *obj.Prog
for c > 0 {
p = gins(arm.AMOVB, &nz, &dst)
p.To.Type = obj.TYPE_MEM
p.To.Offset = 1
p.Scond |= arm.C_PBIT
//print("2. %P\n", p);
c--
}
gc.Regfree(&dst)
gc.Regfree(&nz)
}