Golang Node.Int方法代碼示例

func ginscmp(op int, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if gc.Isint[t.Etype] && n1.Op == gc.OLITERAL && n2.Op != gc.OLITERAL {
		// Reverse comparison to place constant last.
		op = gc.Brrev(op)
		n1, n2 = n2, n1
	}

	var r1, r2, g1, g2 gc.Node
	gc.Regalloc(&r1, t, n1)
	gc.Regalloc(&g1, n1.Type, &r1)
	gc.Cgen(n1, &g1)
	gmove(&g1, &r1)
	if gc.Isint[t.Etype] && gc.Isconst(n2, gc.CTINT) {
		ginscon2(optoas(gc.OCMP, t), &r1, n2.Int())
	} else {
		gc.Regalloc(&r2, t, n2)
		gc.Regalloc(&g2, n1.Type, &r2)
		gc.Cgen(n2, &g2)
		gmove(&g2, &r2)
		rawgins(optoas(gc.OCMP, t), &r1, &r2)
		gc.Regfree(&g2)
		gc.Regfree(&r2)
	}
	gc.Regfree(&g1)
	gc.Regfree(&r1)
	return gc.Gbranch(optoas(op, t), nil, likely)
}

func ginscmp(op int, t *gc.Type, n1, n2 *gc.Node, likely int) *obj.Prog {
	if gc.Isint[t.Etype] && n1.Op == gc.OLITERAL && n1.Int() == 0 && n2.Op != gc.OLITERAL {
		op = gc.Brrev(op)
		n1, n2 = n2, n1
	}
	var r1, r2, g1, g2 gc.Node
	gc.Regalloc(&r1, t, n1)
	gc.Regalloc(&g1, n1.Type, &r1)
	gc.Cgen(n1, &g1)
	gmove(&g1, &r1)
	if gc.Isint[t.Etype] && n2.Op == gc.OLITERAL && n2.Int() == 0 {
		gins(arm.ACMP, &r1, n2)
	} else {
		gc.Regalloc(&r2, t, n2)
		gc.Regalloc(&g2, n1.Type, &r2)
		gc.Cgen(n2, &g2)
		gmove(&g2, &r2)
		gins(optoas(gc.OCMP, t), &r1, &r2)
		gc.Regfree(&g2)
		gc.Regfree(&r2)
	}
	gc.Regfree(&g1)
	gc.Regfree(&r1)
	return gc.Gbranch(optoas(op, t), nil, likely)
}

/*
 * n is a 64-bit value.  fill in lo and hi to refer to its 32-bit halves.
 */
func split64(n *gc.Node, lo *gc.Node, hi *gc.Node) {
	if !gc.Is64(n.Type) {
		gc.Fatal("split64 %v", n.Type)
	}

	if nsclean >= len(sclean) {
		gc.Fatal("split64 clean")
	}
	sclean[nsclean].Op = gc.OEMPTY
	nsclean++
	switch n.Op {
	default:
		switch n.Op {
		default:
			var n1 gc.Node
			if !dotaddable(n, &n1) {
				gc.Igen(n, &n1, nil)
				sclean[nsclean-1] = n1
			}

			n = &n1

		case gc.ONAME:
			if n.Class == gc.PPARAMREF {
				var n1 gc.Node
				gc.Cgen(n.Name.Heapaddr, &n1)
				sclean[nsclean-1] = n1
				n = &n1
			}

			// nothing
		case gc.OINDREG:
			break
		}

		*lo = *n
		*hi = *n
		lo.Type = gc.Types[gc.TUINT32]
		if n.Type.Etype == gc.TINT64 {
			hi.Type = gc.Types[gc.TINT32]
		} else {
			hi.Type = gc.Types[gc.TUINT32]
		}
		hi.Xoffset += 4

	case gc.OLITERAL:
		var n1 gc.Node
		n.Convconst(&n1, n.Type)
		i := n1.Int()
		gc.Nodconst(lo, gc.Types[gc.TUINT32], int64(uint32(i)))
		i >>= 32
		if n.Type.Etype == gc.TINT64 {
			gc.Nodconst(hi, gc.Types[gc.TINT32], int64(int32(i)))
		} else {
			gc.Nodconst(hi, gc.Types[gc.TUINT32], int64(uint32(i)))
		}
	}
}

func intLiteral(n *gc.Node) (x int64, ok bool) {
	switch {
	case n == nil:
		return
	case gc.Isconst(n, gc.CTINT):
		return n.Int(), true
	case gc.Isconst(n, gc.CTBOOL):
		return int64(obj.Bool2int(n.Bool())), true
	}
	return
}

/*
 * generate code to compute address of n,
 * a reference to a (perhaps nested) field inside
 * an array or struct.
 * return 0 on failure, 1 on success.
 * on success, leaves usable address in a.
 *
 * caller is responsible for calling sudoclean
 * after successful sudoaddable,
 * to release the register used for a.
 */
func sudoaddable(as int, n *gc.Node, a *obj.Addr) bool {
	if n.Type == nil {
		return false
	}

	*a = obj.Addr{}

	switch n.Op {
	case gc.OLITERAL:
		if !gc.Isconst(n, gc.CTINT) {
			break
		}
		v := n.Int()
		if v >= 32000 || v <= -32000 {
			break
		}
		switch as {
		default:
			return false

		case arm.AADD,
			arm.ASUB,
			arm.AAND,
			arm.AORR,
			arm.AEOR,
			arm.AMOVB,
			arm.AMOVBS,
			arm.AMOVBU,
			arm.AMOVH,
			arm.AMOVHS,
			arm.AMOVHU,
			arm.AMOVW:
			break
		}

		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		gc.Naddr(a, n)
		return true

	case gc.ODOT,
		gc.ODOTPTR:
		cleani += 2
		reg := &clean[cleani-1]
		reg1 := &clean[cleani-2]
		reg.Op = gc.OEMPTY
		reg1.Op = gc.OEMPTY
		var nn *gc.Node
		var oary [10]int64
		o := gc.Dotoffset(n, oary[:], &nn)
		if nn == nil {
			sudoclean()
			return false
		}

		if nn.Addable && o == 1 && oary[0] >= 0 {
			// directly addressable set of DOTs
			n1 := *nn

			n1.Type = n.Type
			n1.Xoffset += oary[0]
			gc.Naddr(a, &n1)
			return true
		}

		gc.Regalloc(reg, gc.Types[gc.Tptr], nil)
		n1 := *reg
		n1.Op = gc.OINDREG
		if oary[0] >= 0 {
			gc.Agen(nn, reg)
			n1.Xoffset = oary[0]
		} else {
			gc.Cgen(nn, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[0] + 1)
		}

		for i := 1; i < o; i++ {
			if oary[i] >= 0 {
				gc.Fatal("can't happen")
			}
			gins(arm.AMOVW, &n1, reg)
			gc.Cgen_checknil(reg)
			n1.Xoffset = -(oary[i] + 1)
		}

//.........這裏部分代碼省略.........

/*
 * generate shift according to op, one of:
 *	res = nl << nr
 *	res = nl >> nr
 */
func cgen_shift(op int, bounded bool, nl *gc.Node, nr *gc.Node, res *gc.Node) {
	if nl.Type.Width > 4 {
		gc.Fatal("cgen_shift %v", nl.Type)
	}

	w := int(nl.Type.Width * 8)

	if op == gc.OLROT {
		v := nr.Int()
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		if w == 32 {
			gc.Cgen(nl, &n1)
			gshift(arm.AMOVW, &n1, arm.SHIFT_RR, int32(w)-int32(v), &n1)
		} else {
			var n2 gc.Node
			gc.Regalloc(&n2, nl.Type, nil)
			gc.Cgen(nl, &n2)
			gshift(arm.AMOVW, &n2, arm.SHIFT_LL, int32(v), &n1)
			gshift(arm.AORR, &n2, arm.SHIFT_LR, int32(w)-int32(v), &n1)
			gc.Regfree(&n2)

			// Ensure sign/zero-extended result.
			gins(optoas(gc.OAS, nl.Type), &n1, &n1)
		}

		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	if nr.Op == gc.OLITERAL {
		var n1 gc.Node
		gc.Regalloc(&n1, nl.Type, res)
		gc.Cgen(nl, &n1)
		sc := uint64(nr.Int())
		if sc == 0 {
		} else // nothing to do
		if sc >= uint64(nl.Type.Width*8) {
			if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
				gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(w), &n1)
			} else {
				gins(arm.AEOR, &n1, &n1)
			}
		} else {
			if op == gc.ORSH && gc.Issigned[nl.Type.Etype] {
				gshift(arm.AMOVW, &n1, arm.SHIFT_AR, int32(sc), &n1)
			} else if op == gc.ORSH {
				gshift(arm.AMOVW, &n1, arm.SHIFT_LR, int32(sc), &n1) // OLSH
			} else {
				gshift(arm.AMOVW, &n1, arm.SHIFT_LL, int32(sc), &n1)
			}
		}

		if w < 32 && op == gc.OLSH {
			gins(optoas(gc.OAS, nl.Type), &n1, &n1)
		}
		gmove(&n1, res)
		gc.Regfree(&n1)
		return
	}

	tr := nr.Type
	var t gc.Node
	var n1 gc.Node
	var n2 gc.Node
	var n3 gc.Node
	if tr.Width > 4 {
		var nt gc.Node
		gc.Tempname(&nt, nr.Type)
		if nl.Ullman >= nr.Ullman {
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
			gc.Cgen(nr, &nt)
			n1 = nt
		} else {
			gc.Cgen(nr, &nt)
			gc.Regalloc(&n2, nl.Type, res)
			gc.Cgen(nl, &n2)
		}

		var hi gc.Node
		var lo gc.Node
		split64(&nt, &lo, &hi)
		gc.Regalloc(&n1, gc.Types[gc.TUINT32], nil)
		gc.Regalloc(&n3, gc.Types[gc.TUINT32], nil)
		gmove(&lo, &n1)
		gmove(&hi, &n3)
		splitclean()
		gins(arm.ATST, &n3, nil)
		gc.Nodconst(&t, gc.Types[gc.TUINT32], int64(w))
		p1 := gins(arm.AMOVW, &t, &n1)
		p1.Scond = arm.C_SCOND_NE
		tr = gc.Types[gc.TUINT32]
		gc.Regfree(&n3)
//.........這裏部分代碼省略.........

/*
 * generate move:
 *	t = f
 * hard part is conversions.
 */
func gmove(f *gc.Node, t *gc.Node) {
	if gc.Debug['M'] != 0 {
		fmt.Printf("gmove %v -> %v\n", gc.Nconv(f, obj.FmtLong), gc.Nconv(t, obj.FmtLong))
	}

	ft := gc.Simsimtype(f.Type)
	tt := gc.Simsimtype(t.Type)
	cvt := t.Type

	if gc.Iscomplex[ft] || gc.Iscomplex[tt] {
		gc.Complexmove(f, t)
		return
	}

	// cannot have two memory operands
	var a int
	if gc.Ismem(f) && gc.Ismem(t) {
		goto hard
	}

	// convert constant to desired type
	if f.Op == gc.OLITERAL {
		var con gc.Node
		f.Convconst(&con, t.Type)
		f = &con
		ft = tt // so big switch will choose a simple mov

		// some constants can't move directly to memory.
		if gc.Ismem(t) {
			// float constants come from memory.
			if gc.Isfloat[tt] {
				goto hard
			}

			// 64-bit immediates are really 32-bit sign-extended
			// unless moving into a register.
			if gc.Isint[tt] {
				if i := con.Int(); int64(int32(i)) != i {
					goto hard
				}
			}
		}
	}

	// value -> value copy, only one memory operand.
	// figure out the instruction to use.
	// break out of switch for one-instruction gins.
	// goto rdst for "destination must be register".
	// goto hard for "convert to cvt type first".
	// otherwise handle and return.

	switch uint32(ft)<<16 | uint32(tt) {
	default:
		gc.Fatal("gmove %v -> %v", gc.Tconv(f.Type, obj.FmtLong), gc.Tconv(t.Type, obj.FmtLong))

		/*
		 * integer copy and truncate
		 */
	case gc.TINT8<<16 | gc.TINT8, // same size
		gc.TINT8<<16 | gc.TUINT8,
		gc.TUINT8<<16 | gc.TINT8,
		gc.TUINT8<<16 | gc.TUINT8,
		gc.TINT16<<16 | gc.TINT8,
		// truncate
		gc.TUINT16<<16 | gc.TINT8,
		gc.TINT32<<16 | gc.TINT8,
		gc.TUINT32<<16 | gc.TINT8,
		gc.TINT64<<16 | gc.TINT8,
		gc.TUINT64<<16 | gc.TINT8,
		gc.TINT16<<16 | gc.TUINT8,
		gc.TUINT16<<16 | gc.TUINT8,
		gc.TINT32<<16 | gc.TUINT8,
		gc.TUINT32<<16 | gc.TUINT8,
		gc.TINT64<<16 | gc.TUINT8,
		gc.TUINT64<<16 | gc.TUINT8:
		a = x86.AMOVB

	case gc.TINT16<<16 | gc.TINT16, // same size
		gc.TINT16<<16 | gc.TUINT16,
		gc.TUINT16<<16 | gc.TINT16,
		gc.TUINT16<<16 | gc.TUINT16,
		gc.TINT32<<16 | gc.TINT16,
		// truncate
		gc.TUINT32<<16 | gc.TINT16,
		gc.TINT64<<16 | gc.TINT16,
		gc.TUINT64<<16 | gc.TINT16,
		gc.TINT32<<16 | gc.TUINT16,
		gc.TUINT32<<16 | gc.TUINT16,
		gc.TINT64<<16 | gc.TUINT16,
		gc.TUINT64<<16 | gc.TUINT16:
		a = x86.AMOVW

	case gc.TINT32<<16 | gc.TINT32, // same size
		gc.TINT32<<16 | gc.TUINT32,
		gc.TUINT32<<16 | gc.TINT32,
//.........這裏部分代碼省略.........

/*
 * generate division.
 * caller must set:
 *	ax = allocated AX register
 *	dx = allocated DX register
 * generates one of:
 *	res = nl / nr
 *	res = nl % nr
 * according to op.
 */
func dodiv(op int, nl *gc.Node, nr *gc.Node, res *gc.Node, ax *gc.Node, dx *gc.Node) {
	// Have to be careful about handling
	// most negative int divided by -1 correctly.
	// The hardware will trap.
	// Also the byte divide instruction needs AH,
	// which we otherwise don't have to deal with.
	// Easiest way to avoid for int8, int16: use int32.
	// For int32 and int64, use explicit test.
	// Could use int64 hw for int32.
	t := nl.Type

	t0 := t
	check := 0
	if gc.Issigned[t.Etype] {
		check = 1
		if gc.Isconst(nl, gc.CTINT) && nl.Int() != -1<<uint64(t.Width*8-1) {
			check = 0
		} else if gc.Isconst(nr, gc.CTINT) && nr.Int() != -1 {
			check = 0
		}
	}

	if t.Width < 4 {
		if gc.Issigned[t.Etype] {
			t = gc.Types[gc.TINT32]
		} else {
			t = gc.Types[gc.TUINT32]
		}
		check = 0
	}

	var t1 gc.Node
	gc.Tempname(&t1, t)
	var t2 gc.Node
	gc.Tempname(&t2, t)
	if t0 != t {
		var t3 gc.Node
		gc.Tempname(&t3, t0)
		var t4 gc.Node
		gc.Tempname(&t4, t0)
		gc.Cgen(nl, &t3)
		gc.Cgen(nr, &t4)

		// Convert.
		gmove(&t3, &t1)

		gmove(&t4, &t2)
	} else {
		gc.Cgen(nl, &t1)
		gc.Cgen(nr, &t2)
	}

	var n1 gc.Node
	if !gc.Samereg(ax, res) && !gc.Samereg(dx, res) {
		gc.Regalloc(&n1, t, res)
	} else {
		gc.Regalloc(&n1, t, nil)
	}
	gmove(&t2, &n1)
	gmove(&t1, ax)
	var p2 *obj.Prog
	var n4 gc.Node
	if gc.Nacl {
		// Native Client does not relay the divide-by-zero trap
		// to the executing program, so we must insert a check
		// for ourselves.
		gc.Nodconst(&n4, t, 0)

		gins(optoas(gc.OCMP, t), &n1, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if panicdiv == nil {
			panicdiv = gc.Sysfunc("panicdivide")
		}
		gc.Ginscall(panicdiv, -1)
		gc.Patch(p1, gc.Pc)
	}

	if check != 0 {
		gc.Nodconst(&n4, t, -1)
		gins(optoas(gc.OCMP, t), &n1, &n4)
		p1 := gc.Gbranch(optoas(gc.ONE, t), nil, +1)
		if op == gc.ODIV {
			// a / (-1) is -a.
			gins(optoas(gc.OMINUS, t), nil, ax)

			gmove(ax, res)
		} else {
			// a % (-1) is 0.
			gc.Nodconst(&n4, t, 0)

//.........這裏部分代碼省略.........