C++ XString::CStr方法代碼示例

本文整理匯總了C++中XString::CStr方法的典型用法代碼示例。如果您正苦於以下問題：C++ XString::CStr方法的具體用法？C++ XString::CStr怎麽用？C++ XString::CStr使用的例子？那麽, 這裏精選的方法代碼示例或許可以為您提供幫助。您也可以進一步了解該方法所在類XString的用法示例。

在下文中一共展示了XString::CStr方法的9個代碼示例，這些例子默認根據受歡迎程度排序。您可以為喜歡或者感覺有用的代碼點讚，您的評價將有助於係統推薦出更棒的C++代碼示例。

示例1: BehaviourFunction

/*
*******************************************************************
* Function: int BehaviourFunction( const CKBehaviorContext& behaviorContext )
*
* Description : The execution function is the function that will be called 
*               during the process loop of the behavior engine, if the behavior 
*               is defined as using an execution function. This function is not 
*               called if the behavior is defined as a graph. This function is the 
*               heart of the behavior: it should compute the essence of the behavior, 
*               in an incremental way. The minimum amount of computing should be 
*               done at each call, to leave time for the other behaviors to run. 
*               The function receives the delay in milliseconds that has elapsed 
*               since the last behavioral process, and should rely on this value to 
*               manage the amount of effect it has on its computation, if the effect 
*               of this computation relies on time.
*
* Parameters :
*    behaviourContext    r   Behavior context reference, which gives access to 
*                            frequently used global objects ( context, level, manager, etc... )
*
* Returns : int, If it is done, it should return CKBR_OK. If it returns 
*                CKBR_ACTIVATENEXTFRAME, the behavior will again be called 
*                during the next process loop.
*
*******************************************************************
*/
int GBLLDGetSetup::BehaviourFunction( const CKBehaviorContext& behaviorContext )
{
    CKBehavior    *beh;
    CKContext     *context;
    GBLLDManager  *GBLLDMan;
    XString       DBName;
    CKBOOL        logging;
    XString       ODBCName;
    XString       proxyLogin;
    XString       proxyPassword;
    XString       serverAddress;
    XString       serverLogin;
    XString       serverPassword;
    CKBOOL        serverMode;
    XString       userName;
    int           virtoolsUserID;
    CKBOOL        webPlayerMode;
    int           ConnectionID;

    if ( (beh      = behaviorContext.Behavior)                                   == NULL ) return CKBR_BEHAVIORERROR;
    if ( (context  = behaviorContext.Context)                                    == NULL ) return CKBR_BEHAVIORERROR;
    if ( (GBLLDMan = (GBLLDManager*)context->GetManagerByGuid(GBLLDManagerGUID)) == NULL ) return CKBR_BEHAVIORERROR;

    beh->ActivateInput( POS_I_IN, FALSE );

    // Force the reading of the attributes
    GBLLDMan->ReadSetup();

    ConnectionID     = GBLLDMan->GetConnectionID();
    DBName           = GBLLDMan->GetDBName();
    logging          = GBLLDMan->IsLogging();
    ODBCName         = GBLLDMan->GetODBCName();
    proxyLogin       = GBLLDMan->GetProxyLogin();
    proxyPassword    = GBLLDMan->GetProxyPassword();
    serverAddress    = GBLLDMan->GetServerAddress();
    serverLogin      = GBLLDMan->GetServerLogin();
    serverPassword   = GBLLDMan->GetServerPassword();
    serverMode       = GBLLDMan->GetServerMode();
    userName         = GBLLDMan->GetUserName();
    webPlayerMode    = GBLLDMan->IsWebplayerMode();
    virtoolsUserID   = GBLLDMan->GetVirtoolsUserID();

    beh->SetOutputParameterValue( POS_OP_CONNECTIONID,   &ConnectionID );
    beh->SetOutputParameterValue( POS_OP_DBNAME,         DBName.CStr(),         DBName.Length() );
    beh->SetOutputParameterValue( POS_OP_LOGGING,        &logging );
    beh->SetOutputParameterValue( POS_OP_ODBCNAME,       ODBCName.CStr(),       ODBCName.Length() );
    beh->SetOutputParameterValue( POS_OP_PROXYLOGIN,     proxyLogin.CStr(),     proxyLogin.Length() );
    beh->SetOutputParameterValue( POS_OP_PROXYPASSWORD,  proxyPassword.CStr(),  proxyPassword.Length() );
    beh->SetOutputParameterValue( POS_OP_SERVERADDRESS,  serverAddress.CStr(),  serverAddress.Length() );
    beh->SetOutputParameterValue( POS_OP_SERVERLOGIN,    serverLogin.CStr(),    serverLogin.Length() );
    beh->SetOutputParameterValue( POS_OP_SERVERMODE,     &serverMode );
    beh->SetOutputParameterValue( POS_OP_SERVERPASSWORD, serverPassword.CStr(), serverPassword.Length() );
    beh->SetOutputParameterValue( POS_OP_USERNAME,       userName.CStr(),       userName.Length() );
    beh->SetOutputParameterValue( POS_OP_WEBPLAYERMODE,  &webPlayerMode );
    beh->SetOutputParameterValue( POS_OP_VIRTOOLSUSERID, &virtoolsUserID );

    beh->ActivateOutput( POS_O_OUT, TRUE );
    return CKBR_OK;
}

開發者ID:gbaumgart，項目名稱:GBL_Backup，代碼行數:85，代碼來源:GBLLDGetSetup.cpp

示例2: _checkObjectsByAttribute

void PhysicManager::_checkObjectsByAttribute(CKScene *newScene)
{

	CKAttributeManager* attman = m_Context->GetAttributeManager();
	int sizeJFuncMap = ATT_FUNC_TABLE_SIZE;//(sizeof(*getRegistrationTable()) / sizeof((getRegistrationTable())[0]));
	for (int fIndex = 0  ; fIndex  < sizeJFuncMap ; fIndex ++)
	{

		std::vector<int>attributeIdList;
		pFactory::Instance()->findAttributeIdentifiersByGuid(getRegistrationTable()[fIndex].guid,attributeIdList);
		int attCount = attributeIdList.size();

		for (int i = 0 ; i < attCount ; i++ )
		{
			int currentAttType = attributeIdList.at(i);
			const XObjectPointerArray& Array = attman->GetAttributeListPtr( attributeIdList.at(i) );
			for (CKObject** it = Array.Begin(); it != Array.End(); ++it)
			{	
				CK3dEntity *target = static_cast<CK3dEntity*>(*it);
				if (target)
				{
					XString error;
					error.Format("Registering :%s with %s",target->GetName(),attman->GetAttributeNameByType(currentAttType));
					//if(!strcmp( target->GetName(),"smutan3-3" ) )					{					//		xLogger::xLog(XL_START,ELOGTRACE,E_LI_MANAGER,"problem case" );					}

//					CKScene *levelScene = GetContext()->GetCurrentLevel()->GetCurrentScene();
					// we check as no scene is current in use 
					if (		(	
								GetContext()->GetCurrentLevel()->GetLevelScene() == newScene &&
								!isSceneObject2(target) 
							)
							||
							(	newScene && newScene->IsObjectHere(target) && newScene !=GetContext()->GetCurrentLevel()->GetLevelScene() )
							||
							(	
								newScene &&
								GetContext()->GetCurrentLevel()->GetCurrentScene() && 
								GetContext()->GetCurrentLevel()->GetCurrentScene() == newScene &&
								newScene !=GetContext()->GetCurrentLevel()->GetLevelScene() &&
								newScene->IsObjectHere(target)
							)
							||
							(
								(physicFlags & PMF_DONT_DELETE_SCENES) 
							)
						)
					{
							xLogger::xLog(XL_START,ELOGTRACE,E_LI_MANAGER,error.CStr() );
							(*getRegistrationTable()[fIndex].rFunc)(target,currentAttType,true,false);
							GetPMan()->getCheckList().PushBack(target->GetID());
					}
				}
			}
		}
	}
}

開發者ID:gbaumgart，項目名稱:vt，代碼行數:56，代碼來源:PhysicManagerAttributeRegistry.cpp

示例3: createTireFuncFromParameter

pTireFunction pFactory::createTireFuncFromParameter(CKParameter *par)
{
	pTireFunction result;
	result.setToDefault();

	if (!par)
	{
		return result;
	}
	result.extremumSlip = vtTools::ParameterTools::GetValueFromParameterStruct<float>(par,1);
	result.extremumValue = vtTools::ParameterTools::GetValueFromParameterStruct<float>(par,2);
	result.asymptoteSlip = vtTools::ParameterTools::GetValueFromParameterStruct<float>(par,3);
	result.asymptoteValue= vtTools::ParameterTools::GetValueFromParameterStruct<float>(par,4);
	result.stiffnessFactor = vtTools::ParameterTools::GetValueFromParameterStruct<float>(par,5);

	/************************************************************************/
	/* Lat Tire Func from XML ?                                                                      */
	/************************************************************************/
	int xmlLinkId = vtTools::ParameterTools::GetValueFromParameterStruct<int>(par,0);
	if (xmlLinkId!=0)
	{
		XString nodeName = vtAgeia::getEnumDescription(GetPMan()->GetContext()->GetParameterManager(),VTE_XML_TIRE_SETTINGS,xmlLinkId );
		loadFrom(result,nodeName.CStr(),getDefaultDocument());
		if (!result.isValid())
		{
			xLogger::xLog(XL_START,ELOGERROR,E_LI_MANAGER,"Latitude Tire Function was incorrect, setting to default");
			result.setToDefault();
		}else{
			copyTo((CKParameterOut*)par,result);
		}
	}


	if (!result.isValid())
	{
		result.setToDefault();
	}
	return result;
}

開發者ID:gbaumgart，項目名稱:vt，代碼行數:39，代碼來源:pFactoryWheel.cpp

示例4: BehaviourFunction

/*
 *******************************************************************
 * Function: int BehaviourFunction() 
 *
 * Description : Returns the number of plugins in this DLL
 *		
 * Paramters :
 *    CKBehaviorContext& r The virtools behaviour context
 *
 * Returns : One of the many virtools return values
 *
 *******************************************************************
 */
int CGBLFileSystem::BehaviourFunction(const CKBehaviorContext& behContext)
{
	BOOL error = FALSE;

	// Quick bit of error checking
	CKBehavior* beh = behContext.Behavior;
	CKBeObject* beObject = beh->GetTarget();
	int fileSystemBrowseMode = 0;

    if (!beObject)
	{
       error = TRUE;
	}

	if (!error)
	{
		// Reset On input, if active
		if (beh->IsInputActive(eBehInputOn)) 
		{
			beh->ActivateInput(eBehInputOn, FALSE);

			// Clear error message output
			beh->SetOutputParameterValue(eParamOutputErrorMsg, EMPTY_STRING);
		}

		// see which mode we are in
		beh->GetInputParameterValue(eParamInputMode, &fileSystemBrowseMode);
	}

	if (!error)
	{
		// See if we have the special case
		char *currentFolder = NULL;
		currentFolder = (char*)(beh->GetInputParameterReadDataPtr(eParamInputCurrentFolder));

		XString scannedFolder = currentFolder;

		if (currentFolder) 
		{
			// special case takes priority over FILES / FOLDER mode
			if (strcmp(currentFolder,SPECIAL_CASE)==0)
			{
				beh->SetOutputParameterValue(eParamOutputScannedFolder, scannedFolder.CStr(),scannedFolder.Length()+1 );
				if (fileSystemBrowseMode == eFolder)
				{			
					if (GetLogicalDrives(beh))
					{
						// Everythings gone ok we have a list of the logical drives
						beh->ActivateOutput(eBehOutputDone, TRUE);
					}
					else
					{
						// Something went wrong
						beh->SetOutputParameterValue(eParamOutputErrorMsg, "Failed To Scan The Logical Drives");
						beh->ActivateOutput(eBehOutputError, TRUE);
					}
				}
				else
				{
					//  Cant scan for files in the SPECIAL_CASE
					// Get the destination data array and clear it out
					CKDataArray* dataArray = static_cast<CKDataArray*>(beh->GetInputParameterObject(eParamInputDataArray));
					if (!dataArray)
					{
						CGBLWidget::OutputBBErrorMsg(beh, "Please attatch an array to the BB");
					}
					else
					{
						dataArray->Clear();
						dataArray->AddRow();
						int currentRow = dataArray->GetRowCount()-1; // 0 index
						dataArray->SetElementStringValue(currentRow,NAME_COLUMN,NOT_FOUND);
						beh->ActivateOutput(eBehOutputDone, TRUE);
					}
					
				}
			}
			else
			{
				// add a "\" to the end, it makes the ouput consistent.
				int len = strlen (scannedFolder.CStr());
				if ((scannedFolder[len-1])!=SINGLE_SEPERATOR)
				{
					scannedFolder << SINGLE_SEPERATOR;
				}

				// Try to scan the passed folder
//.........這裏部分代碼省略.........

開發者ID:gbaumgart，項目名稱:GBL_Backup，代碼行數:101，代碼來源:GBLFileSystem.cpp

示例5: createMaterialFromEntity

NxMaterialDesc* pFactory::createMaterialFromEntity(CKBeObject*object)
{

	//////////////////////////////////////////////////////////////////////////
	//sanity checks : 
	if (!object )
	{
		return NULL;
	}

	if (!object->HasAttribute(GetPMan()->att_surface_props))
	{
		return NULL;
	}
	//////////////////////////////////////////////////////////////////////////
	CKParameterManager *pm = object->GetCKContext()->GetParameterManager();
	int parameterType  =  pm->ParameterGuidToType(VTE_XML_MATERIAL_TYPE);

	NxMaterialDesc *result = new NxMaterialDesc();
	using namespace vtTools::AttributeTools;
	XString nodeName;


	int enumID = GetValueFromAttribute<int>(object,GetPMan()->att_surface_props,0);
	if (enumID==0)
	{
		goto takeFromAttribute;
	}


	CKEnumStruct *enumStruct = pm->GetEnumDescByType(parameterType);
	if ( enumStruct )
	{
		for (int i = 0 ; i < enumStruct->GetNumEnums() ; i ++ )
		{
			if(i == enumID)
			{
				nodeName  = enumStruct->GetEnumDescription(i);
				if (nodeName.Length())
				{
					result  = createMaterialFromXML(nodeName.CStr(),getDefaultDocument());
					if (result)
					{
						return result;
					}
				}
			}
		}
	}


takeFromAttribute :
	{
		float dynamicFriction = GetValueFromAttribute<float>(object,GetPMan()->att_surface_props,1);
		if (dynamicFriction >=0.0f)
		{
			result->dynamicFriction  =dynamicFriction;
		}

		float statFriction = GetValueFromAttribute<float>(object,GetPMan()->att_surface_props,2);
		if (statFriction>=0.0f)
		{
			result->staticFriction=statFriction;
		}

		float rest = GetValueFromAttribute<float>(object,GetPMan()->att_surface_props,3);
		if (rest>=0.0f)
		{
			result->restitution=rest;
		}

		float dynamicFrictionV = GetValueFromAttribute<float>(object,GetPMan()->att_surface_props,4);
		if (dynamicFrictionV >=0.0f)
		{
			result->dynamicFrictionV  =dynamicFrictionV;
		}

		float staticFrictionV = GetValueFromAttribute<float>(object,GetPMan()->att_surface_props,5);
		if (staticFrictionV>=0.0f)
		{
			result->staticFriction=staticFrictionV;
		}

		VxVector anis = GetValueFromAttribute<VxVector>(object,GetPMan()->att_surface_props,6);
		if (anis.Magnitude()>=0.01f)
		{
			result->dirOfAnisotropy=pMath::getFrom(anis);
		}

		int fMode = GetValueFromAttribute<int>(object,GetPMan()->att_surface_props,7);
		if (fMode !=-1)
		{
			result->frictionCombineMode=(NxCombineMode)fMode;
		}
		int rMode = GetValueFromAttribute<int>(object,GetPMan()->att_surface_props,8);
		if (rMode !=-1)
		{
			result->restitutionCombineMode=(NxCombineMode)rMode;
		}

//.........這裏部分代碼省略.........

開發者ID:gbaumgart，項目名稱:vt，代碼行數:101，代碼來源:pFactoryMaterial.cpp

示例6: BehaviourFunction

int GBLCOCreateError::BehaviourFunction( const CKBehaviorContext& behContext )
{
	CKBehavior	*behaviour = behContext.Behavior;
	CKContext	*context = behContext.Context;

	if ( behaviour == NULL || context == NULL )
		return CKBR_GENERICERROR;

	behaviour->ActivateInput(ECGBLCOCreateErrorBehInputs::In, FALSE);

	CGBLCOErrorManager *errorManager = (CGBLCOErrorManager *)context->GetManagerByGuid(CGBLCOErrorManagerGUID);
	if ( errorManager == NULL )
		return CKBR_GENERICERROR;

	// Get Parameters Inputs Source.
	CKParameterOut *poutError = behaviour->GetOutputParameter(ECGBLCOCreateErrorParamOutputs::GetError);
	if ( poutError == NULL )
		return CKBR_GENERICERROR;
	
	CKParameterIn*pinCode = behaviour->GetInputParameter(ECGBLCOCreateErrorParamInputs::SetErrorCode);
	CKParameterIn*pinDesc = behaviour->GetInputParameter(ECGBLCOCreateErrorParamInputs::SetErrorDescription);
	CKParameterIn*pinType = behaviour->GetInputParameter(ECGBLCOCreateErrorParamInputs::SetErrorType);
	 
	if ( pinCode == NULL || pinDesc == NULL || pinType == NULL )
		return CKBR_GENERICERROR;
	
	CKParameter*paraCode = pinCode->GetRealSource();
	CKParameter*paraDesc = pinDesc->GetRealSource();
	CKParameter*paraType = pinType->GetRealSource();

	if ( paraCode == NULL || paraDesc == NULL || paraType == NULL )
		return CKBR_GENERICERROR;
	
	// Get Parameters Inputs Values (code,desc,type).
	int code = 0;
	paraCode->GetValue(&code);

	XString desc;
	int paramsize = paraDesc->GetStringValue(NULL);
	if (paramsize) 
	{
		XAP<char> paramstring(new char[paramsize]);
		paraDesc->GetStringValue(paramstring,TRUE);
		desc << (char*)paramstring;
	} 

	CGBLCOError::EGBLCOErrorType type;
	paraType->GetValue(&type);
	
	// Create the TGBLError parameter output.
	TGBLError::SetTGBLError(poutError,type,code,(CKSTRING)desc.CStr());
	CK_CLASSID cid = poutError->GetClassID();
	
	// 
	if ( type != CGBLCOError::EGBLCOErrorType::GBLCO_FATAL )
	{
		behaviour->ActivateOutput(ECGBLCOCreateErrorBehOutputs::OutHandled, FALSE);
		behaviour->ActivateOutput(ECGBLCOCreateErrorBehOutputs::OutUnhandled, TRUE);
		return CKBR_OK;
	}

	errorManager->NotifyError(type,code,(CKSTRING)desc.CStr());
	behaviour->ActivateOutput(ECGBLCOCreateErrorBehOutputs::OutHandled, TRUE);
	behaviour->ActivateOutput(ECGBLCOCreateErrorBehOutputs::OutUnhandled, FALSE);
  	
	return CKBR_OK;
}

開發者ID:gbaumgart，項目名稱:GBL_Backup，代碼行數:67，代碼來源:GBLCOCreateError.cpp

示例7: copyTo

int pFactory::copyTo(pWheelDescr *dst,CKParameter *src)
{

	int result  = 1;
	if (!src || !dst)
	{
		return NULL;
	}

	using namespace vtTools::ParameterTools;
	dst->setToDefault();


	dst->wheelSuspension = GetValueFromParameterStruct<float>(src,E_WD_SUSPENSION);
	dst->springRestitution= GetValueFromParameterStruct<float>(src,E_WD_SPRING_RES);
	dst->springBias = GetValueFromParameterStruct<float>(src,E_WD_SPRING_BIAS);
	dst->springDamping= GetValueFromParameterStruct<float>(src,E_WD_DAMP);

	dst->maxBrakeForce= GetValueFromParameterStruct<float>(src,E_WD_MAX_BFORCE);
	dst->frictionToSide= GetValueFromParameterStruct<float>(src,E_WD_FSIDE);
	dst->frictionToFront= GetValueFromParameterStruct<float>(src,E_WD_FFRONT);
	
	CKParameterOut *pOld  = GetParameterFromStruct(src,E_WD_INVERSE_WHEEL_MASS);
	if (pOld)
	{
		if (pOld->GetGUID()  == CKPGUID_FLOAT)
		{
			dst->inverseWheelMass= GetValueFromParameterStruct<float>(src,E_WD_INVERSE_WHEEL_MASS);
		}

		if (pOld->GetGUID()  == CKPGUID_INT)
		{
			dst->wheelApproximation= GetValueFromParameterStruct<int>(src,E_WD_INVERSE_WHEEL_MASS);
		}
	}

	//dst->wheelApproximation= GetValueFromParameterStruct<int>(float,E_WD_INVERSE_WHEEL_MASS);

	dst->wheelFlags= (WheelFlags)GetValueFromParameterStruct<int>(src,E_WD_FLAGS);
	dst->wheelShapeFlags=(WheelShapeFlags) GetValueFromParameterStruct<int>(src,E_WD_SFLAGS);


	CKParameterOut *parLatFunc = GetParameterFromStruct(src,E_WD_LAT_FUNC);
	CKParameterOut *parLongFunc = GetParameterFromStruct(src,E_WD_LONG_FUNC);



	/************************************************************************/
	/* XML Setup ?                                                                     */
	/************************************************************************/
	int xmlLinkId= GetValueFromParameterStruct<int>(src,E_WD_XML);
	bool wIsXML=false;
	bool latIsXML= false;
	bool longIsXML=false;

	XString nodeName;
	if ( xmlLinkId !=0 )
	{
		nodeName = vtAgeia::getEnumDescription(GetPMan()->GetContext()->GetParameterManager(),VTE_XML_WHEEL_SETTINGS,xmlLinkId);
		loadWheelDescrFromXML(*dst,nodeName.CStr(),getDefaultDocument());
		wIsXML =true;
		if (!dst->isValid())
		{
			xLogger::xLog(XL_START,ELOGERROR,E_LI_MANAGER,"Wheel Description was invalid");
		}


		if (dst->latFunc.xmlLink!=0)
		{
			latIsXML=true;
		}

		if (dst->longFunc.xmlLink!=0)
		{
			longIsXML=true;
		}
	}



	if (!latIsXML)
	{
		dst->latFunc = createTireFuncFromParameter(parLatFunc);
	}


	if (!longIsXML)
	{
		dst->longFunc= createTireFuncFromParameter(parLongFunc);
	}

	if (wIsXML)
	{
		copyTo((CKParameterOut*)src,dst);
	}

	
	if (longIsXML)
	{
		copyTo(GetParameterFromStruct(src,E_WD_LONG_FUNC),dst->longFunc);
//.........這裏部分代碼省略.........

開發者ID:gbaumgart，項目名稱:vt，代碼行數:101，代碼來源:pFactoryWheel.cpp

示例8: GetPMan

pWheel *pFactory::createWheelSubShape(pRigidBody *body,CK3dEntity* subEntity,CKMesh *mesh,pObjectDescr *descr,VxVector localPos, VxQuaternion localRotation,NxShape*dstShape)
{
	//################################################################
	//
	// Sanity checks
	//
	#ifdef _DEBUG
		assert(body && subEntity && descr );	// Should never occur ! 
	#endif // _DEBUG


	XString errorStr;

	//################################################################
	//
	// Retrieve the wheel setting from attribute 
	//
	int attTypeWheelSettings = GetPMan()->att_wheelDescr;
	int attTypeConvexCylinderSettings  = GetPMan()->getAttributeTypeByGuid(VTS_PHYSIC_CONVEX_CYLDINDER_WHEEL_DESCR);
	
	if (!subEntity->HasAttribute(attTypeWheelSettings))
	{
		errorStr.Format("Object %s has been set as wheel but there is no wheel attribute attached",subEntity->GetName());
		xLogger::xLog(XL_START,ELOGERROR,E_LI_MANAGER,errorStr.CStr());
		return NULL;
	}


	pWheelDescr *wDescr  = new pWheelDescr();
	CKParameterOut *par = subEntity->GetAttributeParameter(attTypeWheelSettings);
	if (par)
	{
		
		int err = copyTo(wDescr,par);
		if (!wDescr->isValid() )
		{
			xLogger::xLog(XL_START,ELOGERROR,E_LI_MANAGER,"Wheel Description is invalid");
			SAFE_DELETE(wDescr);
			return NULL;
		}
	}

	//################################################################
	//
	// Construct the final wheel object basing on the type of the wheel
	//

	pWheel *result  = NULL;


	//if(wDescr->wheelFlags & WF_UseWheelShape)	{
	
	result = new pWheel2(body,wDescr,subEntity);
	
	/*else
	{
		//################################################################
		// Wheel type 1 specified, check there is also a override for the convex cylinder 
		if (!subEntity->HasAttribute(attTypeConvexCylinderSettings))
		{
			errorStr.Format("Object %s has been created with default settings for convex cylinder shape",subEntity->GetName());
			xLogger::xLog(XL_START,ELOGWARNING,E_LI_MANAGER,errorStr.CStr());
		}
		result = new pWheel1(body,wDescr);
	}*/

	//################################################################
	//
	// Create the wheel shape 
	//
	


	//if(wDescr->wheelFlags & WF_UseWheelShape){
	
	dstShape=_createWheelShape2(body->getActor(),descr,wDescr,subEntity,mesh,localPos,localRotation);
	((pWheel2*)result)->setWheelShape((NxWheelShape*)dstShape);
//	}
	/*else
	{
		dstShape=_createWheelShape1(body->getActor(),(pWheel1*)result,descr,wDescr,subEntity,mesh,localPos,localRotation);
	}*/

	if (!dstShape)
	{
		errorStr.Format("Couldn't create wheel shape for object %s",subEntity->GetName());
		xLogger::xLog(XL_START,ELOGWARNING,E_LI_MANAGER,errorStr.CStr());
		
		SAFE_DELETE(wDescr);
		SAFE_DELETE(result);
		return NULL;
	}


	//################################################################
	//
	// Finalize wheel setup
	//

	result->setEntID(subEntity->GetID());
//.........這裏部分代碼省略.........

開發者ID:gbaumgart，項目名稱:vt，代碼行數:101，代碼來源:pFactoryWheel.cpp

示例9: BehaviourFunction

/*
 *******************************************************************
 * Function: int BehaviourFunction() 
 *
 * Description :
 *		
 * Paramters :
 *    CKBehaviorContext& r The virtools behaviour context
 *
 * Returns : One of the many virtools return values
 *
 *******************************************************************
 */
int CGBLLOStringBuilder::BehaviourFunction(const CKBehaviorContext& behContext)
{
	CKBehavior* beh = behContext.Behavior;
	CKBeObject* beObject = beh->GetTarget();
	CKBOOL error = FALSE;
	XString outString = NULL;

    // error check to ensure virtools is working ok
	if (!beObject)
	{
		error = TRUE;
		CKParameterOut *parameterOutError = beh->GetOutputParameter(EGBLStringBuilderParamOutputs::eParamGetError);
		TGBLError::SetTGBLError(parameterOutError,CGBLCOError::EGBLCOErrorType::GBLCO_FATAL,LOI_ERROR_NO_BEHAVIOUR_STATE,LOI_ERROR_NO_BEHAVIOUR_DESC);
		beh->SetOutputParameterValue(eParamGetError, parameterOutError);
		beh->ActivateOutput(eBehOutputError, TRUE);
	}

	int lengthOfSource = 0;
	int lengthOfInsert = 0;
	int insertPosition = 0;
	if (!error)
	{
		// Reset On input, if active
		if (beh->IsInputActive(eBehInputOn)) 
		{
			beh->ActivateInput(eBehInputOn, FALSE);
		}

		// get the BB params into variables to work with
		XString sourceString = NULL;
		sourceString = (CKSTRING)(beh->GetInputParameterReadDataPtr(eParamSetSourceString));

		XString insertString = NULL;
		insertString = (CKSTRING)(beh->GetInputParameterReadDataPtr(eParamSetInsertString));

		
		beh->GetInputParameterValue(eParamSetInsertPosition,&insertPosition);

		

		lengthOfSource = strlen(sourceString.Str());
		lengthOfInsert = strlen(insertString.Str());

		// Simple bounds checking and error recovery
		if (insertPosition<0)
		{
			insertPosition=0;
		}
		if (insertPosition>lengthOfSource)
		{
			outString = sourceString;
			outString += insertString;
		}
		else
		{
			// a little more error checking and simple recovery
			// deal with the special cases first
			if (lengthOfSource<=0)
			{
				// an empty source
				outString = insertString;
			}
			else if (insertPosition == 0)
			{
				outString = insertString;
				outString += sourceString;
			}
			else
			{
				//  build up the new string
				XString start = NULL;
				XString end = NULL;
				start = sourceString.Substring(0,insertPosition);
				end = sourceString.Substring(insertPosition,lengthOfSource);
				outString  = start ;
				outString += insertString;
				outString += end;
			}
		}
	}

	if (!error)
	{
		int newCartPos = insertPosition+lengthOfInsert;
		beh->SetOutputParameterValue(eParamGetCarretPosition,&newCartPos);
		beh->SetOutputParameterValue(eParamGetNewText, outString.CStr(), outString.Length() + 1);
		beh->ActivateOutput(eBehOutputDone, TRUE);
//.........這裏部分代碼省略.........

開發者ID:gbaumgart，項目名稱:GBL_Backup，代碼行數:101，代碼來源:GBLLOStringBuilder.cpp

注：本文中的XString::CStr方法示例由純淨天空整理自Github/MSDocs等開源代碼及文檔管理平台，相關代碼片段篩選自各路編程大神貢獻的開源項目，源碼版權歸原作者所有，傳播和使用請參考對應項目的License；未經允許，請勿轉載。