Python SoftwareSecurePhotoVerification.submit方法代码示例

# 需要导入模块: from verify_student.models import SoftwareSecurePhotoVerification [as 别名]
# 或者: from verify_student.models.SoftwareSecurePhotoVerification import submit [as 别名]
    def post(self, request):
        """
        submits the reverification to SoftwareSecure
        """

        try:
            attempt = SoftwareSecurePhotoVerification(user=request.user)
            b64_face_image = request.POST['face_image'].split(",")[1]
            b64_photo_id_image = request.POST['photo_id_image'].split(",")[1]

            attempt.upload_face_image(b64_face_image.decode('base64'))
            attempt.upload_photo_id_image(b64_photo_id_image.decode('base64'))
            attempt.mark_ready()

            # save this attempt
            attempt.save()
            # then submit it across
            attempt.submit()
            return HttpResponseRedirect(reverse('verify_student_reverification_confirmation'))
        except Exception:
            log.exception(
                "Could not submit verification attempt for user {}".format(request.user.id)
            )
            context = {
                "user_full_name": request.user.profile.name,
                "error": True,
            }
            return render_to_response("verify_student/photo_reverification.html", context)

# 需要导入模块: from verify_student.models import SoftwareSecurePhotoVerification [as 别名]
# 或者: from verify_student.models.SoftwareSecurePhotoVerification import submit [as 别名]
    def post(self, request, course_id):
        """
        submits the reverification to SoftwareSecure
        """
        try:
            now = datetime.datetime.now(UTC)
            course_id = CourseKey.from_string(course_id)
            window = MidcourseReverificationWindow.get_window(course_id, now)
            if window is None:
                raise WindowExpiredException
            attempt = SoftwareSecurePhotoVerification(user=request.user, window=window)
            b64_face_image = request.POST["face_image"].split(",")[1]

            attempt.upload_face_image(b64_face_image.decode("base64"))
            attempt.fetch_photo_id_image()
            attempt.mark_ready()

            attempt.save()
            attempt.submit()
            course_enrollment = CourseEnrollment.get_or_create_enrollment(request.user, course_id)
            course_enrollment.update_enrollment(mode="verified")
            course_enrollment.emit_event(EVENT_NAME_USER_SUBMITTED_MIDCOURSE_REVERIFY)
            return HttpResponseRedirect(reverse("verify_student_midcourse_reverification_confirmation"))

        except WindowExpiredException:
            log.exception(
                "User {} attempted to re-verify, but the window expired before the attempt".format(request.user.id)
            )
            return HttpResponseRedirect(reverse("verify_student_reverification_window_expired"))

        except Exception:
            log.exception("Could not submit verification attempt for user {}".format(request.user.id))
            context = {"user_full_name": request.user.profile.name, "error": True}
            return render_to_response("verify_student/midcourse_photo_reverification.html", context)

# 需要导入模块: from verify_student.models import SoftwareSecurePhotoVerification [as 别名]
# 或者: from verify_student.models.SoftwareSecurePhotoVerification import submit [as 别名]
    def create_and_submit(self):
        """Helper method to create a generic submission and send it."""
        user = UserFactory.create()
        attempt = SoftwareSecurePhotoVerification(user=user)
        user.profile.name = u"Rust\u01B4"

        attempt.upload_face_image("Just pretend this is image data")
        attempt.upload_photo_id_image("Hey, we're a photo ID")
        attempt.mark_ready()
        attempt.submit()

        return attempt

# 需要导入模块: from verify_student.models import SoftwareSecurePhotoVerification [as 别名]
# 或者: from verify_student.models.SoftwareSecurePhotoVerification import submit [as 别名]
 def create_and_submit(self, username):
     """
     Helper method that lets us create new SoftwareSecurePhotoVerifications
     """
     user = UserFactory.create()
     attempt = SoftwareSecurePhotoVerification(user=user)
     user.profile.name = username
     attempt.upload_face_image("Fake Data")
     attempt.upload_photo_id_image("More Fake Data")
     attempt.mark_ready()
     attempt.submit()
     return attempt

# 需要导入模块: from verify_student.models import SoftwareSecurePhotoVerification [as 别名]
# 或者: from verify_student.models.SoftwareSecurePhotoVerification import submit [as 别名]
    def test_submission_while_testing_flag_is_true(self):
        """ Test that a fake value is set for field 'photo_id_key' of user's
        initial verification when the feature flag 'AUTOMATIC_VERIFY_STUDENT_IDENTITY_FOR_TESTING'
        is enabled.
        """
        user = UserFactory.create()
        attempt = SoftwareSecurePhotoVerification(user=user)
        user.profile.name = "test-user"

        attempt.upload_photo_id_image("Image data")
        attempt.mark_ready()
        attempt.submit()

        self.assertEqual(attempt.photo_id_key, "fake-photo-id-key")

# 需要导入模块: from verify_student.models import SoftwareSecurePhotoVerification [as 别名]
# 或者: from verify_student.models.SoftwareSecurePhotoVerification import submit [as 别名]
    def test_state_transitions(self):
        """Make sure we can't make unexpected status transitions.

        The status transitions we expect are::

            created → ready → submitted → approved
                                            ↑ ↓
                                        →  denied
        """
        user = UserFactory.create()
        attempt = SoftwareSecurePhotoVerification(user=user)
        assert_equals(attempt.status, SoftwareSecurePhotoVerification.STATUS.created)
        assert_equals(attempt.status, "created")

        # This should fail because we don't have the necessary fields filled out
        assert_raises(VerificationException, attempt.mark_ready)

        # These should all fail because we're in the wrong starting state.
        assert_raises(VerificationException, attempt.submit)
        assert_raises(VerificationException, attempt.approve)
        assert_raises(VerificationException, attempt.deny)

        # Now let's fill in some values so that we can pass the mark_ready() call
        attempt.face_image_url = "http://fake.edx.org/face.jpg"
        attempt.photo_id_image_url = "http://fake.edx.org/photo_id.jpg"
        attempt.mark_ready()
        assert_equals(attempt.name, user.profile.name) # Move this to another test
        assert_equals(attempt.status, "ready")

        # Once again, state transitions should fail here. We can't approve or
        # deny anything until it's been placed into the submitted state -- i.e.
        # the user has clicked on whatever agreements, or given payment, or done
        # whatever the application requires before it agrees to process their
        # attempt.
        assert_raises(VerificationException, attempt.approve)
        assert_raises(VerificationException, attempt.deny)

        # Now we submit
        attempt.submit()
        assert_equals(attempt.status, "submitted")

        # So we should be able to both approve and deny
        attempt.approve()
        assert_equals(attempt.status, "approved")

        attempt.deny("Could not read name on Photo ID")
        assert_equals(attempt.status, "denied")

# 需要导入模块: from verify_student.models import SoftwareSecurePhotoVerification [as 别名]
# 或者: from verify_student.models.SoftwareSecurePhotoVerification import submit [as 别名]
def submit_photos_for_verification(request):
    """Submit a photo verification attempt.

    Arguments:
        request (HttpRequest): The request to submit photos.

    Returns:
        HttpResponse: 200 on success, 400 if there are errors.

    """
    # Check the required parameters
    missing_params = set(['face_image', 'photo_id_image']) - set(request.POST.keys())
    if len(missing_params) > 0:
        msg = _("Missing required parameters: {missing}").format(missing=", ".join(missing_params))
        return HttpResponseBadRequest(msg)

    # If the user already has valid or pending request, the UI will hide
    # the verification steps.  For this reason, we reject any requests
    # for users that already have a valid or pending verification.
    if SoftwareSecurePhotoVerification.user_has_valid_or_pending(request.user):
        return HttpResponseBadRequest(_("You already have a valid or pending verification."))

    # If the user wants to change his/her full name,
    # then try to do that before creating the attempt.
    if request.POST.get('full_name'):
        try:
            update_account_settings(request.user, {"name": request.POST.get('full_name')})
        except UserNotFound:
            return HttpResponseBadRequest(_("No profile found for user"))
        except AccountValidationError:
            msg = _(
                "Name must be at least {min_length} characters long."
            ).format(min_length=NAME_MIN_LENGTH)
            return HttpResponseBadRequest(msg)

    # Create the attempt
    attempt = SoftwareSecurePhotoVerification(user=request.user)
    try:
        b64_face_image = request.POST['face_image'].split(",")[1]
        b64_photo_id_image = request.POST['photo_id_image'].split(",")[1]
    except IndexError:
        msg = _("Image data is not valid.")
        return HttpResponseBadRequest(msg)

    attempt.upload_face_image(b64_face_image.decode('base64'))
    attempt.upload_photo_id_image(b64_photo_id_image.decode('base64'))
    attempt.mark_ready()
    attempt.submit()

    account_settings = get_account_settings(request.user)

    # Send a confirmation email to the user
    context = {
        'full_name': account_settings['name'],
        'platform_name': settings.PLATFORM_NAME
    }

    subject = _("Verification photos received")
    message = render_to_string('emails/photo_submission_confirmation.txt', context)
    from_address = microsite.get_value('default_from_email', settings.DEFAULT_FROM_EMAIL)
    to_address = account_settings['email']

    send_mail(subject, message, from_address, [to_address], fail_silently=False)

    return HttpResponse(200)