本文整理汇总了C#中TrionicCANLib.CAN.CANMessage.setID方法的典型用法代码示例。如果您正苦于以下问题：C# CANMessage.setID方法的具体用法？C# CANMessage.setID怎么用？C# CANMessage.setID使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类TrionicCANLib.CAN.CANMessage的用法示例。
在下文中一共展示了CANMessage.setID方法的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: waitForMessage
/// <summary>
/// waitForMessage waits for a specific CAN message give by a CAN id.
/// </summary>
/// <param name="a_canID">The CAN id to listen for</param>
/// <param name="timeout">Listen timeout</param>
/// <param name="r_canMsg">The CAN message with a_canID that we where listening for.</param>
/// <returns>The CAN id for the message we where listening for, otherwise 0.</returns>
public override uint waitForMessage(uint a_canID, uint timeout, out CANMessage canMsg)
{
Lawicel.CANUSB.CANMsg r_canMsg;
canMsg = new CANMessage();
int readResult = 0;
int nrOfWait = 0;
while (nrOfWait < timeout)
{
r_canMsg = new Lawicel.CANUSB.CANMsg();
readResult = Lawicel.CANUSB.canusb_Read(m_deviceHandle, out r_canMsg);
if (readResult == Lawicel.CANUSB.ERROR_CANUSB_OK)
{
Thread.Sleep(1);
AddToCanTrace("rx: 0x" + r_canMsg.id.ToString("X4") + r_canMsg.data.ToString("X16"));
if (r_canMsg.id == 0x00)
{
nrOfWait++;
}
else if (r_canMsg.id != a_canID)
continue;
canMsg.setData(r_canMsg.data);
canMsg.setID(r_canMsg.id);
canMsg.setLength(r_canMsg.len);
return (uint)r_canMsg.id;
}
else if (readResult == Lawicel.CANUSB.ERROR_CANUSB_NO_MESSAGE)
{
Thread.Sleep(1);
nrOfWait++;
}
}
r_canMsg = new Lawicel.CANUSB.CANMsg();
return 0;
}示例2: readMessages
public void readMessages()
{
CANMessage canMessage = new CANMessage();
Console.WriteLine("readMessages started");
while (true)
{
lock (m_synchObject)
{
if (m_endThread)
{
Console.WriteLine("readMessages ended");
return;
}
}
if (rawString != null)
{
logger.Trace(String.Format("Raw Data: {0}", rawString));
//AddToSerialTrace("RAW RX: " + rawString.Replace("\r",m_cr_sequence));
string rxString = rawString.Replace("\r", m_cr_sequence); //replace , because stringbuilder cannot handle \r
bool isStopped = false;
if (rxString.Length > 0)
{
//AddToSerialTrace("RECEIVE TEXT: " + rxString);
//System.Diagnostics.Debug.WriteLine("SERMSG: " + rxString);
var lines = ExtractLines(rxString);
foreach (var rxMessage in lines)
{
if (rxMessage.StartsWith("STOPPED")) { isStopped = true; }
else if (rxMessage.StartsWith("NO (MORE?) DATA")) { } //skip it
else if (rxMessage.StartsWith("CAN ERROR")) { } //handle error?
else if (rxMessage.StartsWith("ELM")) { isStopped = false; } //skip it, this is a trick to stop ELM from listening to more messages and send ready char
else if (rxMessage.StartsWith("?")) { isStopped = false; }
else if (rxMessage.Length == 19) // is it a valid line
{
try
{
rxMessage.Replace(" ", "");//remove all whitespaces
uint id = Convert.ToUInt32(rxMessage.Substring(0, 3), 16);
if (acceptMessageId(id))
{
canMessage.setID(id);
canMessage.setLength(8); // TODO: alter to match data
//canMessage.setData(0x0000000000000000); // reset message content
canMessage.setData(ExtractDataFromString(rxMessage));
receivedMessage(canMessage);
}
}
catch (Exception)
{
//Console.WriteLine("MSG: " + rxMessage);
}
}
//disable whitespace logging
if (rxMessage.Length > 0)
{
logger.Debug("TELNET: " + rxMessage);
}
}
}
if (!isStopped)
{
logger.Debug("TELNET READY");
interfaceBusy = false;
}
rawString = null;
}
}
}示例3: waitForMessage
//---------------------------------------------------------------------------------------------
/**
Waits for arrival of a specific CAN message or any message if ID = 0.
@param a_canID message ID
@param timeout timeout, ms
@param canMsg message
@return message ID
*/
public override uint waitForMessage(uint a_canID, uint timeout,
out CANMessage canMsg)
{
canMsg = new CANMessage();
Debug.Assert(canMsg != null);
canMsg.setID(0);
caCombiAdapter.caCANFrame frame = new caCombiAdapter.caCANFrame();
if (this.combi.CAN_GetMessage(ref frame, timeout) &&
(frame.id == a_canID || a_canID == 0))
{
// message received
canMsg.setID(frame.id);
canMsg.setLength(frame.length);
canMsg.setData(frame.data);
return frame.id;
}
// timed out
return 0;
}示例4: readMessages
/// <summary>
/// readMessages is the "run" method of this class. It reads all incomming messages
/// and publishes them to registered ICANListeners.
/// </summary>
public void readMessages()
{
int readResult = 0;
Lawicel.CANUSB.CANMsg r_canMsg = new Lawicel.CANUSB.CANMsg();
CANMessage canMessage = new CANMessage();
Console.WriteLine("readMessages started");
while (true)
{
lock (m_synchObject)
{
if (m_endThread)
{
Console.WriteLine("readMessages ended");
return;
}
}
readResult = Lawicel.CANUSB.canusb_Read(m_deviceHandle, out r_canMsg);
if (readResult == Lawicel.CANUSB.ERROR_CANUSB_OK)
{
if (acceptMessageId(r_canMsg.id))
{
canMessage.setID(r_canMsg.id);
canMessage.setLength(r_canMsg.len);
canMessage.setTimeStamp(r_canMsg.timestamp);
canMessage.setFlags(r_canMsg.flags);
canMessage.setData(r_canMsg.data);
lock (m_listeners)
{
AddToCanTrace(string.Format("RX: {0} {1}", canMessage.getID().ToString("X3"), canMessage.getData().ToString("X16")));
foreach (ICANListener listener in m_listeners)
{
listener.handleMessage(canMessage);
}
}
}
}
else if (readResult == Lawicel.CANUSB.ERROR_CANUSB_NO_MESSAGE)
{
Thread.Sleep(1);
}
}
}示例5: waitAnyMessage
/// <summary>
/// waitAnyMessage waits for any message to be received.
/// </summary>
/// <param name="timeout">Listen timeout</param>
/// <param name="r_canMsg">The CAN message that was first received</param>
/// <returns>The CAN id for the message received, otherwise 0.</returns>
private uint waitAnyMessage(uint timeout, out Lawicel.CANUSB.CANMsg r_canMsg)
{
CANMessage canMessage = new CANMessage();
string line = string.Empty;
int readResult = 0;
int nrOfWait = 0;
while (nrOfWait < timeout)
{
m_serialPort.Write("\r");
m_serialPort.Write("P\r");
bool endofFrames = false;
while (!endofFrames)
{
Console.WriteLine("reading line");
line = m_serialPort.ReadLine();
Console.WriteLine("line: " + line + " len: " + line.Length.ToString());
if (line[0] == '\x07' || line[0] == '\r' || line[0] == 'A')
{
endofFrames = true;
}
else
{
if (line.Length == 14)
{
// three bytes identifier
r_canMsg = new Lawicel.CANUSB.CANMsg();
r_canMsg.id = (uint)Convert.ToInt32(line.Substring(1, 3), 16);
r_canMsg.len = (byte)Convert.ToInt32(line.Substring(4, 1), 16);
ulong data = 0;
// add all the bytes
data |= (ulong)(byte)Convert.ToInt32(line.Substring(5, 2), 16) << 7 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(7, 2), 16) << 6 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(9, 2), 16) << 5 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(11, 2), 16) << 4 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(13, 2), 16) << 3 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(15, 2), 16) << 2 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(17, 2), 16) << 1 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(19, 2), 16);
r_canMsg.data = data;
canMessage.setID(r_canMsg.id);
canMessage.setLength(r_canMsg.len);
canMessage.setFlags(0);
canMessage.setData(r_canMsg.data);
return (uint)r_canMsg.id;
}
}
}
//Thread.Sleep(0);
nrOfWait++;
}
r_canMsg = new Lawicel.CANUSB.CANMsg();
return 0;
}示例6: readMessages
/// <summary>
/// readMessages is the "run" method of this class. It reads all incomming messages
/// and publishes them to registered ICANListeners.
/// </summary>
public void readMessages()
{
int readResult = 0;
Lawicel.CANUSB.CANMsg r_canMsg = new Lawicel.CANUSB.CANMsg();
CANMessage canMessage = new CANMessage();
logger.Debug("readMessages started");
while (true)
{
lock (m_synchObject)
{
if (m_endThread)
{
logger.Debug("readMessages thread ended");
return;
}
}
readResult = Lawicel.CANUSB.canusb_Read(m_deviceHandle, out r_canMsg);
if (readResult == Lawicel.CANUSB.ERROR_CANUSB_OK)
{
if (acceptMessageId(r_canMsg.id))
{
canMessage.setID(r_canMsg.id);
canMessage.setLength(r_canMsg.len);
canMessage.setTimeStamp(r_canMsg.timestamp);
canMessage.setFlags(r_canMsg.flags);
canMessage.setData(r_canMsg.data);
receivedMessage(canMessage);
}
}
else if (readResult == Lawicel.CANUSB.ERROR_CANUSB_NO_MESSAGE)
{
Thread.Sleep(1);
}
}
}示例7: waitAnyMessage
/// <summary>
/// waitAnyMessage waits for any message to be received.
/// </summary>
/// <param name="timeout">Listen timeout</param>
/// <param name="r_canMsg">The CAN message that was first received</param>
/// <returns>The CAN id for the message received, otherwise 0.</returns>
private uint waitAnyMessage(uint timeout, out CANMessage canMessage)
{
canMessage = new CANMessage();
Debug.Assert(canMessage != null);
int wait_cnt = 0;
uint id;
byte length;
ulong data;
while (wait_cnt < timeout)
{
if (MctAdapter_ReceiveMessage(out id, out length, out data))
{
// message received
canMessage.setID(id);
canMessage.setLength(length);
canMessage.setData(data);
return id;
}
// wait a bit
Thread.Sleep(1);
++wait_cnt;
}
// nothing was received
return 0;
}示例8: readMessages
// int thrdcnt = 0;
/// <summary>
/// readMessages is the "run" method of this class. It reads all incomming messages
/// and publishes them to registered ICANListeners.
/// </summary>
public void readMessages()
{
while (true)
{
lock (m_synchObject)
{
if (m_endThread)
{
m_endThread = false;
return;
}
}
if (m_serialPort.IsOpen)
{
// read the status?
string line = string.Empty;
try
{
line = m_serialPort.ReadLine();
if (line.Length > 0)
{
if (line.Length == 25)
{
Lawicel.CANUSB.CANMsg r_canMsg = new Lawicel.CANUSB.CANMsg();
canMessage = new CANMessage();
// three bytes identifier
r_canMsg.id = (uint)Convert.ToInt32(line.Substring(1, 3), 16);
r_canMsg.len = (byte)Convert.ToInt32(line.Substring(4, 1), 16);
ulong data = 0;
// add all the bytes
data |= (ulong)(byte)Convert.ToInt32(line.Substring(5, 2), 16);
data |= (ulong)(byte)Convert.ToInt32(line.Substring(7, 2), 16) << 1 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(9, 2), 16) << 2 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(11, 2), 16) << 3 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(13, 2), 16) << 4 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(15, 2), 16) << 5 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(17, 2), 16) << 6 * 8;
data |= (ulong)(byte)Convert.ToInt32(line.Substring(19, 2), 16) << 7 * 8;
r_canMsg.data = data;
canMessage.setID(r_canMsg.id);
canMessage.setLength(r_canMsg.len);
canMessage.setFlags(r_canMsg.flags);
canMessage.setData(r_canMsg.data);
lock (m_listeners)
{
AddToCanTrace(string.Format("RX: {0} {1} {2}", canMessage.getID().ToString("X3"), line.Substring(5, 16), line));
foreach (ICANListener listener in m_listeners)
{
listener.handleMessage(canMessage);
}
}
}
else if(line.Contains("z"))
{
interfaceBusy = false;
//Console.WriteLine("clear");
}
else if (line.Length == 2 && Convert.ToInt32(line.Substring(1, 2), 16) != 0x07)
{
//Console.WriteLine("Send error");
}
else
{
//Console.WriteLine("Unknown message: " + line);
}
}
}
catch (Exception E)
{
Console.WriteLine("Failed to read frames from CANbus: " + E.Message);
}
}
//Thread.Sleep(2);
Thread.Sleep(delayTimespan); // give others some air
}
}示例9: waitForMessage
/// <summary>
/// waitForMessage waits for a specific CAN message give by a CAN id.
/// </summary>
/// <param name="a_canID">The CAN id to listen for</param>
/// <param name="timeout">Listen timeout</param>
/// <param name="r_canMsg">The CAN message with a_canID that we where listening for.</param>
/// <returns>The CAN id for the message we where listening for, otherwise 0.</returns>
public override uint waitForMessage(uint a_canID, uint timeout, out CANMessage canMessage)
{
canMessage = new CANMessage();
Debug.Assert(canMessage != null);
int wait_cnt = 0;
uint id;
byte length;
ulong data;
while (wait_cnt < timeout)
{
if (MctAdapter_ReceiveMessage(out id, out length, out data))
{
// message received
canMessage.setID(id);
canMessage.setLength(length);
canMessage.setData(data);
if (canMessage.getID() != a_canID)
continue;
return (uint)canMessage.getID();
}
// wait a bit
Thread.Sleep(1);
++wait_cnt;
}
// nothing was received
return 0;
}示例10: read_messages
//-------------------------------------------------------------------------
/**
Handles incoming messages.
*/
private void read_messages()
{
uint id;
byte length;
ulong data;
CANMessage msg = new CANMessage();
Debug.Assert(msg != null);
// main loop
while (true)
{
// check for thread termination request
Debug.Assert(this.term_mutex != null);
lock (this.term_mutex)
{
if (this.term_requested)
{
return;
}
}
// receive messages
while (MctAdapter_ReceiveMessage(out id, out length, out data))
{
if (acceptMessageId(id))
{
// convert message
msg.setID(id);
msg.setLength(length);
msg.setData(data);
// pass message to listeners
lock (this.m_listeners)
{
AddToCanTrace("RX: " + id.ToString("X4") + " " + data.ToString("X16"));
foreach (ICANListener listener in this.m_listeners)
{
listener.handleMessage(msg);
}
}
}
}
// give up CPU for a moment
Thread.Sleep(1);
}
}示例11: waitForMessage
/// <summary>
/// waitForMessage waits for a specific CAN message give by a CAN id.
/// </summary>
/// <param name="a_canID">The CAN id to listen for</param>
/// <param name="timeout">Listen timeout</param>
/// <param name="r_canMsg">The CAN message with a_canID that we where listening for.</param>
/// <returns>The CAN id for the message we where listening for, otherwise 0.</returns>
public override uint waitForMessage(uint a_canID, uint timeout, out CANMessage canMsg)
{
EASYSYNC.CANMsg r_canMsg;
canMsg = new CANMessage();
int readResult = 0;
int nrOfWait = 0;
while (nrOfWait < timeout)
{
r_canMsg = new EASYSYNC.CANMsg();
readResult = EASYSYNC.canusb_Read(m_deviceHandle, out r_canMsg);
if (readResult == EASYSYNC.ERROR_CANUSB_OK)
{
if (r_canMsg.id == 0x00)
{
nrOfWait++;
}
else if (r_canMsg.id != a_canID)
continue;
canMsg.setData(r_canMsg.data);
canMsg.setID(r_canMsg.id);
canMsg.setLength(r_canMsg.len);
return (uint)r_canMsg.id;
}
else if (readResult == EASYSYNC.ERROR_CANUSB_NO_MESSAGE)
{
Thread.Sleep(1);
nrOfWait++;
}
}
r_canMsg = new EASYSYNC.CANMsg();
return 0;
}示例12: readMessages
/// <summary>
/// readMessages is the "run" method of this class. It reads all incomming messages
/// and publishes them to registered ICANListeners.
/// </summary>
public void readMessages()
{
int readResult = 0;
EASYSYNC.CANMsg r_canMsg = new EASYSYNC.CANMsg();
CANMessage canMessage = new CANMessage();
while (true)
{
lock (m_synchObject)
{
if (m_endThread)
return;
}
readResult = EASYSYNC.canusb_Read(m_deviceHandle, out r_canMsg);
if (readResult == EASYSYNC.ERROR_CANUSB_OK)
{
canMessage.setID(r_canMsg.id);
canMessage.setLength(r_canMsg.len);
canMessage.setTimeStamp(r_canMsg.timestamp);
canMessage.setFlags(r_canMsg.flags);
canMessage.setData(r_canMsg.data);
lock (m_listeners)
{
foreach (ICANListener listener in m_listeners)
{
listener.handleMessage(canMessage);
}
}
}
else if (readResult == EASYSYNC.ERROR_CANUSB_NO_MESSAGE)
{
Thread.Sleep(1);
}
}
}示例13: readMessages
public void readMessages()
{
CANMessage canMessage = new CANMessage();
StringBuilder receiveText = new StringBuilder();
Console.WriteLine("readMessages started");
while (true)
{
lock (m_synchObject)
{
if (m_endThread)
{
Console.WriteLine("readMessages ended");
return;
}
}
receiveDataSemaphore.WaitOne();
if (m_serialPort != null)
{
if (m_serialPort.IsOpen)
{
if (m_serialPort.BytesToRead > 0)
{
string rawString = m_serialPort.ReadExisting();
//AddToSerialTrace("RAW RX: " + rawString.Replace("\r",m_cr_sequence));
string rxString = rawString.Replace("\n", "").Replace(">", "");// remove prompt characters... we don't need that stuff
bool isStopped = false;
if (rxString.Length > 0)
{
rxString = rxString.Replace("\r", m_cr_sequence); //replace , because stringbuilder cannot handle \r
receiveText.Append(rxString);
//AddToSerialTrace("RECEIVE TEXT: " + receiveText.ToString());
//System.Diagnostics.Debug.WriteLine("SERMSG: " + receiveText);
var lines = ExtractLines(ref receiveText);
foreach (var rxMessage in lines)
{
if (rxMessage.StartsWith("STOPPED")) { isStopped = true; }
else if (rxMessage.StartsWith("NO DATA")) { } //skip it
else if (rxMessage.StartsWith("CAN ERROR"))
{
//handle error?
}
else if (rxMessage.StartsWith("ELM")) { isStopped = false; } //skip it, this is a trick to stop ELM from listening to more messages and send ready char
else if (rxMessage.StartsWith("?")) { isStopped = false; }
else if (rxMessage.StartsWith("NO DATA"))
{
AddToSerialTrace("NO DATA");
Console.WriteLine("NO DATA");
}
else if (rxMessage.Length == 19) // is it a valid line
{
try
{
rxMessage.Replace(" ", "");//remove all whitespaces
uint id = Convert.ToUInt32(rxMessage.Substring(0, 3), 16);
if (acceptMessageId(id))
{
canMessage.setID(id);
canMessage.setLength(8); // TODO: alter to match data
//canMessage.setData(0x0000000000000000); // reset message content
canMessage.setData(ExtractDataFromString(rxMessage));
lock (m_listeners)
{
AddToCanTrace(string.Format("RX: {0} {1}", canMessage.getID().ToString("X3"), canMessage.getData().ToString("X16")));
foreach (ICANListener listener in m_listeners)
{
listener.handleMessage(canMessage);
}
}
}
}
catch (Exception)
{
//Console.WriteLine("MSG: " + rxMessage);
}
}
//disable whitespace logging
if (rxMessage.Length > 0)
{
AddToSerialTrace("SERRX: " + rxMessage);
}
}
}
if (rawString.Contains(">") && !isStopped)
{
AddToSerialTrace("SERIAL READY");
sendDataSempahore.WaitOne(0);
sendDataSempahore.Release();
interfaceBusy = false;
}
}
}
}
}
}示例14: readMessages
public void readMessages()
{
CANMessage canMessage = new CANMessage();
string rxMessage = string.Empty;
Console.WriteLine("readMessages started");
while (true)
{
lock (m_synchObject)
{
if (m_endThread)
{
Console.WriteLine("readMessages ended");
return;
}
}
try
{
if (m_serialPort.IsOpen)
{
do
{
rxMessage = m_serialPort.ReadLine();
rxMessage = rxMessage.Replace("\r", ""); // remove prompt characters... we don't need that stuff
rxMessage = rxMessage.Replace("\n", ""); // remove prompt characters... we don't need that stuff
} while (rxMessage.StartsWith("w") == false);
uint id = Convert.ToUInt32(rxMessage.Substring(1, 3), 16);
if (acceptMessageId(id))
{
canMessage.setID(id);
canMessage.setLength(8);
canMessage.setData(0x0000000000000000);
for (uint i = 0; i < 8; i++)
canMessage.setCanData(Convert.ToByte(rxMessage.Substring(5 + (2 * (int)i), 2), 16), i);
lock (m_listeners)
{
AddToCanTrace("RX: " + canMessage.getID().ToString("X3") + " " + canMessage.getLength().ToString("X1") + " " + canMessage.getData().ToString("X16"));
//Console.WriteLine("MSG: " + rxMessage);
foreach (ICANListener listener in m_listeners)
{
listener.handleMessage(canMessage);
}
}
}
}
}
catch (Exception)
{
Console.WriteLine("MSG: " + rxMessage);
}
}
}示例15: SendMessage
private void SendMessage(uint id, ulong data)
{
CANMessage msg = new CANMessage();
msg.setID(id);
msg.setLength(8);
msg.setData(data);
if (!canUsbDevice.sendMessage(msg))
{
Console.WriteLine("Failed to send message");
}
}