本文整理汇总了C#中System.Data.SqlClient.TdsParserStateObject.TryReadInt64方法的典型用法代码示例。如果您正苦于以下问题：C# TdsParserStateObject.TryReadInt64方法的具体用法？C# TdsParserStateObject.TryReadInt64怎么用？C# TdsParserStateObject.TryReadInt64使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类System.Data.SqlClient.TdsParserStateObject的用法示例。
在下文中一共展示了TdsParserStateObject.TryReadInt64方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: TryProcessDone
private bool TryProcessDone(SqlCommand cmd, SqlDataReader reader, ref RunBehavior run, TdsParserStateObject stateObj)
{
ushort curCmd;
ushort status;
int count;
// Can't retry TryProcessDone
stateObj._syncOverAsync = true;
// status
// command
// rowcount (valid only if DONE_COUNT bit is set)
if (!stateObj.TryReadUInt16(out status))
{
return false;
}
if (!stateObj.TryReadUInt16(out curCmd))
{
return false;
}
long longCount;
if (!stateObj.TryReadInt64(out longCount))
{
return false;
}
count = (int)longCount;
// We get a done token with the attention bit set
if (TdsEnums.DONE_ATTN == (status & TdsEnums.DONE_ATTN))
{
Debug.Assert(TdsEnums.DONE_MORE != (status & TdsEnums.DONE_MORE), "Not expecting DONE_MORE when receiving DONE_ATTN");
Debug.Assert(stateObj._attentionSent, "Received attention done without sending one!");
stateObj._attentionReceived = true;
Debug.Assert(stateObj._inBytesUsed == stateObj._inBytesRead && stateObj._inBytesPacket == 0, "DONE_ATTN received with more data left on wire");
}
if ((null != cmd) && (TdsEnums.DONE_COUNT == (status & TdsEnums.DONE_COUNT)))
{
if (curCmd != TdsEnums.SELECT)
{
cmd.InternalRecordsAffected = count;
}
// Skip the bogus DONE counts sent by the server
if (stateObj._receivedColMetaData || (curCmd != TdsEnums.SELECT))
{
cmd.OnStatementCompleted(count);
}
}
stateObj._receivedColMetaData = false;
// Surface exception for DONE_ERROR in the case we did not receive an error token
// in the stream, but an error occurred. In these cases, we throw a general server error. The
// situations where this can occur are: an invalid buffer received from client, login error
// and the server refused our connection, and the case where we are trying to log in but
// the server has reached its max connection limit. Bottom line, we need to throw general
// error in the cases where we did not receive a error token along with the DONE_ERROR.
if ((TdsEnums.DONE_ERROR == (TdsEnums.DONE_ERROR & status)) && stateObj.ErrorCount == 0 &&
stateObj._errorTokenReceived == false && (RunBehavior.Clean != (RunBehavior.Clean & run)))
{
stateObj.AddError(new SqlError(0, 0, TdsEnums.MIN_ERROR_CLASS, _server, SQLMessage.SevereError(), "", 0));
if (null != reader)
{
if (!reader.IsInitialized)
{
run = RunBehavior.UntilDone;
}
}
}
// Similar to above, only with a more severe error. In this case, if we received
// the done_srverror, this exception will be added to the collection regardless.
// The server will always break the connection in this case.
if ((TdsEnums.DONE_SRVERROR == (TdsEnums.DONE_SRVERROR & status)) && (RunBehavior.Clean != (RunBehavior.Clean & run)))
{
stateObj.AddError(new SqlError(0, 0, TdsEnums.FATAL_ERROR_CLASS, _server, SQLMessage.SevereError(), "", 0));
if (null != reader)
{
if (!reader.IsInitialized)
{
run = RunBehavior.UntilDone;
}
}
}
ProcessSqlStatistics(curCmd, status, count);
// stop if the DONE_MORE bit isn't set (see above for attention handling)
if (TdsEnums.DONE_MORE != (status & TdsEnums.DONE_MORE))
{
stateObj._errorTokenReceived = false;
if (stateObj._inBytesUsed >= stateObj._inBytesRead)
{
stateObj._pendingData = false;
}
}
//.........这里部分代码省略.........
示例2: TryReadSqlValueInternal
internal bool TryReadSqlValueInternal(SqlBuffer value, byte tdsType, int length, TdsParserStateObject stateObj)
{
switch (tdsType)
{
case TdsEnums.SQLBIT:
case TdsEnums.SQLBITN:
Debug.Assert(length == 1, "invalid length for SqlBoolean type!");
byte byteValue;
if (!stateObj.TryReadByte(out byteValue))
{
return false;
}
value.Boolean = (byteValue != 0);
break;
case TdsEnums.SQLINTN:
if (length == 1)
{
goto case TdsEnums.SQLINT1;
}
else if (length == 2)
{
goto case TdsEnums.SQLINT2;
}
else if (length == 4)
{
goto case TdsEnums.SQLINT4;
}
else
{
goto case TdsEnums.SQLINT8;
}
case TdsEnums.SQLINT1:
Debug.Assert(length == 1, "invalid length for SqlByte type!");
if (!stateObj.TryReadByte(out byteValue))
{
return false;
}
value.Byte = byteValue;
break;
case TdsEnums.SQLINT2:
Debug.Assert(length == 2, "invalid length for SqlInt16 type!");
short shortValue;
if (!stateObj.TryReadInt16(out shortValue))
{
return false;
}
value.Int16 = shortValue;
break;
case TdsEnums.SQLINT4:
Debug.Assert(length == 4, "invalid length for SqlInt32 type!");
int intValue;
if (!stateObj.TryReadInt32(out intValue))
{
return false;
}
value.Int32 = intValue;
break;
case TdsEnums.SQLINT8:
Debug.Assert(length == 8, "invalid length for SqlInt64 type!");
long longValue;
if (!stateObj.TryReadInt64(out longValue))
{
return false;
}
value.Int64 = longValue;
break;
case TdsEnums.SQLFLTN:
if (length == 4)
{
goto case TdsEnums.SQLFLT4;
}
else
{
goto case TdsEnums.SQLFLT8;
}
case TdsEnums.SQLFLT4:
Debug.Assert(length == 4, "invalid length for SqlSingle type!");
float singleValue;
if (!stateObj.TryReadSingle(out singleValue))
{
return false;
}
value.Single = singleValue;
break;
case TdsEnums.SQLFLT8:
Debug.Assert(length == 8, "invalid length for SqlDouble type!");
double doubleValue;
if (!stateObj.TryReadDouble(out doubleValue))
{
return false;
}
value.Double = doubleValue;
//.........这里部分代码省略.........
示例3: TryProcessEnvChange
//.........这里部分代码省略.........
_defaultLCID = env.newCollation.LCID;
}
if (!stateObj.TryReadByte(out byteLength))
{
return false;
}
env.oldLength = byteLength;
Debug.Assert(env.oldLength == 5 || env.oldLength == 0, "Improper length in old collation!");
if (env.oldLength == 5)
{
if (!TryProcessCollation(stateObj, out env.oldCollation))
{
return false;
}
}
env.length = 3 + env.newLength + env.oldLength;
break;
case TdsEnums.ENV_BEGINTRAN:
case TdsEnums.ENV_COMMITTRAN:
case TdsEnums.ENV_ROLLBACKTRAN:
if (!stateObj.TryReadByte(out byteLength))
{
return false;
}
env.newLength = byteLength;
Debug.Assert(env.newLength == 0 || env.newLength == 8, "Improper length for new transaction id!");
if (env.newLength > 0)
{
if (!stateObj.TryReadInt64(out env.newLongValue))
{
return false;
}
Debug.Assert(env.newLongValue != SqlInternalTransaction.NullTransactionId, "New transaction id is null?"); // the server guarantees that zero is an invalid transaction id.
}
else
{
env.newLongValue = SqlInternalTransaction.NullTransactionId; // the server guarantees that zero is an invalid transaction id.
}
if (!stateObj.TryReadByte(out byteLength))
{
return false;
}
env.oldLength = byteLength;
Debug.Assert(env.oldLength == 0 || env.oldLength == 8, "Improper length for old transaction id!");
if (env.oldLength > 0)
{
if (!stateObj.TryReadInt64(out env.oldLongValue))
{
return false;
}
Debug.Assert(env.oldLongValue != SqlInternalTransaction.NullTransactionId, "Old transaction id is null?"); // the server guarantees that zero is an invalid transaction id.
}
else
{
env.oldLongValue = SqlInternalTransaction.NullTransactionId; // the server guarantees that zero is an invalid transaction id.
}
// env.length includes 1 byte type token
env.length = 3 + env.newLength + env.oldLength;